component
P4200SCX
Public Made by Adomby adom
Shenzhen JingYang ESD And Surge Protection (TVS/ESD), SMB. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownP4200SCX
Shenzhen JingYang · ESD And Surge Protection (TVS/ESD) · SMB
P4200SCX from Shenzhen JingYang, in a SMB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised bidirectional ESD/TVS diode; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised bidirectional ESD/TVS diode; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SMB |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Stand-off voltage | VRM | 400 | V | Electrical Parameters (Tamb=25℃) | 2 | ||
| Switching voltage | VBO | 540 | V | Electrical Parameters (Tamb=25℃) | 2 | ||
| Break over current | IBO | 800 | mA | Electrical Parameters (Tamb=25℃) | 2 | ||
| Non-repetitive peak pulse current | IPP | 100 | A | 10/1000 us; applies -40 to +85℃ (note 1) | 1 | ||
| Non-repetitive peak pulse current | IPP | 150 | A | 5/310 us; applies -40 to +85℃ (note 1) | 1 | ||
| Non-repetitive peak pulse current | IPP | 400 | A | 8/20 us; applies -40 to +85℃ (note 1) | 1 | ||
| Non-repetitive peak pulse voltage | VPP | 6000 | V | 10/700us | 1 | ||
| ESD rating per IEC61000-4-2 | VESD | 8 | KV | Contact | 1 | ||
| ESD rating per IEC61000-4-2 | VESD | 15 | KV | Air | 1 | ||
| Storage temperature range | Ts | -40 | 150 | ℃ | 1 | ||
| Maximum junction temperature | Tj | 150 | ℃ | 1 | |||
| On-state voltage | VT | 4 | V | Electrical Parameters (Tamb=25℃) | 2 | ||
| Holding current | IH | 50 | mA | Electrical Parameters (Tamb=25℃) | 2 | ||
| Off-state capacitance | CO | 32 | pF | Measured at 1 MHz, 2 V bias (note 2) | 2 |
CAD (KiCad official)
- Symbol:
P4200SCX - Footprint:
Diode_SMD:D_SMB - 3D model: SMB (KiCad packages3D, STEP)
- 3D model files:
p4200scx-etched.step/p4200scx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p4200scx.step/p4200scx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (6 pp, sha256
10bd743d198ceb36, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).