Generated by kicad-footprint-generator · KiCad file format 20260206
P25Q80L-UXH-IR
(PUYA) · NOR FLASH · USON-8-EP(2x3)
P25Q80L-UXH-IR from (PUYA), in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input. |
| 2 | SO | bidirectional | Serial data output for 1x I/O (SIO1), also serial data input and output for 4x I/O read mode. |
| 3 | WP# | bidirectional | Active-low write protection input (SIO2), also serial data input and output for 4x I/O read mode. |
| 4 | GND | power_in | Ground of the device. |
| 5 | SI | bidirectional | Serial data input for 1x I/O (SIO0), also serial data input and output for 4x I/O read mode. |
| 6 | SCLK | input | Serial interface clock input. |
| 7 | HOLD# | bidirectional | Pauses the device without deselecting it (SIO3), also serial data input and output for 4x I/O read mode. |
| 8 | VCC | power_in | Power supply of the device, 1.65V to 2.0V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | (PUYA) |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Deep power down current | IDPD | 0.1 | 0.6 | uA | CS#=Vcc, all other inputs at 0V or Vcc | 9 | |
| Standby current | ISB | 9 | uA | CS#, HOLD#, WP#=VIH all inputs at CMOS levels | 9 | ||
| Low power read current (03h) | ICC1 | 1 | 2 | mA | f=1MHz; IOUT=0mA | 9 | |
| Read current (0Bh) | ICC2 | 1.5 | 2.5 | mA | f=50MHz; IOUT=0mA | 9 | |
| Read current (0Bh) | ICC2 | 2 | 3 | mA | f=85MHz; IOUT=0mA | 9 | |
| Program current | ICC3 | 2 | 4 | mA | CS#=Vcc | 9 | |
| Erase current | ICC4 | 2 | 4 | mA | CS#=Vcc | 9 | |
| Input load current | ILI | 1 | uA | All inputs at CMOS level | 9 | ||
| Output leakage | ILO | 1 | uA | All inputs at CMOS level | 9 | ||
| Output low voltage | VOL | 0.2 | V | IOL=100uA | 9 | ||
| Supply voltage | Vcc | 1.65 | 2 | V | Read, erase and program | 4 | |
| Operating temperature | Ta | -40 | 85 | °C | Industrial | 4 | |
| Storage temperature | -65 | 150 | °C | 8 | |||
| Maximum operation voltage | 2.5 | V | 8 | ||||
| Voltage on any pin with respect to ground | -0.6 | 2.5 | V | 8 | |||
| DC output current | 5 | mA | 8 | ||||
| Output capacitance | COUT | 8 | pF | VOUT=GND; TA=25°C, F=1MHz, Vcc=1.8V | 8 | ||
| Input capacitance | CIN | 6 | pF | VIN=GND; TA=25°C, F=1MHz, Vcc=1.8V | 8 | ||
| Clock frequency (FAST_READ etc.) | fSCLK | 85 | MHz | FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | 10 | ||
| Clock frequency for READ | fRSCLK | 33 | MHz | READ instructions | 10 | ||
| Clock frequency for 2READ, DREAD, QREAD | fTSCLK | 85 | MHz | 2READ,DREAD,QREAD instructions | 10 | ||
| Clock frequency for 4READ | fQ | 70 | MHz | 4READ instructions | 10 | ||
| Clock frequency for QPP | fQPP | 85 | MHz | Quad page program | 10 | ||
| Clock high time | tCH | 5.5 | ns | 10 | |||
| Clock low time | tCL | 5.5 | ns | 10 | |||
| Clock rise time (peak to peak) | tCLCH | 0.1 | v/ns | 10 | |||
| Clock fall time (peak to peak) | tCHCL | 0.1 | v/ns | 10 | |||
| CS# active setup time | tSLCH | 5 | ns | relative to SCLK | 10 | ||
| CS# not active hold time | tCHSL | 5 | ns | relative to SCLK | 10 | ||
| Data in setup time | tDVCH | 2 | ns | 10 | |||
| Data in hold time | tCHDX | 3 | ns | 10 | |||
| CS# active hold time | tCHSH | 5 | ns | relative to SCLK | 10 | ||
| CS# not active setup time | tSHCH | 5 | ns | relative to SCLK | 10 | ||
| CS# deselect time read to next read | tSHSL | 15 | ns | From Read to next Read | 10 | ||
| CS# deselect time write/erase/program to read status | tSHSL | 30 | ns | From Write,Erase,Program to Read Status Register | 10 | ||
| Output disable time | tSHQZ | 6 | ns | 10 | |||
| Clock low to output valid | tCLQV | 7 | ns | Loading 30pF | 10 | ||
| Clock low to output valid | tCLQV | 6 | ns | Loading 15pF | 10 | ||
| Output hold time | tCLQX | 0 | ns | 10 | |||
| HOLD# active setup time | tHLCH | 5 | ns | relative to SCLK | 10 | ||
| HOLD# active hold time | tCHHH | 5 | ns | relative to SCLK | 10 | ||
| HOLD# not active setup time | tHHCH | 5 | ns | relative to SCLK | 10 | ||
| HOLD# not active hold time | tCHHL | 5 | ns | relative to SCLK | 10 | ||
| HOLD# to output Low-Z | tHHQX | 6 | ns | 10 | |||
| HOLD# to output High-Z | tHLQZ | 6 | ns | 10 | |||
| Write protect setup time | tWHSL | 20 | ns | Only applicable for WRSR | 10 | ||
| Write protect hold time | tSHWL | 100 | ns | Only applicable for WRSR | 10 | ||
| CS# high to deep power-down mode | tDP | 3 | us | 10 | |||
| CS# high to standby without electronic signature read | tRES1 | 8 | us | 10 | |||
| CS# high to standby with electronic signature read | tRES2 | 8 | us | 10 | |||
| Write status register cycle time | tW | 8 | 12 | ms | 10 | ||
| Erase suspend latency | TESL | 30 | us | 11 | |||
| Program suspend latency | TPSL | 30 | us | 11 | |||
| Latency between program resume and next suspend | TPRS | 0.3 | us | 11 | |||
| Latency between erase resume and next suspend | TERS | 0.3 | us | 11 | |||
| Page program time (up to 256 bytes) | tPP | 2 | 3 | ms | 11 | ||
| Page erase time | tPE | 8 | 20 | ms | 11 | ||
| Sector erase time | tSE | 8 | 20 | ms | 11 | ||
| Block erase time for 32K bytes | tBE1 | 8 | 20 | ms | 11 | ||
| Block erase time for 64K bytes | tBE2 | 8 | 20 | ms | 11 | ||
| Chip erase time | tCE | 8 | 20 | ms | 11 |
CAD (KiCad official)
- Symbol:
P25Q80L-UXH-IR - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
p25q80l-uxh-ir-etched.step/p25q80l-uxh-ir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p25q80l-uxh-ir.step/p25q80l-uxh-ir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: (PUYA) datasheet (68 pp, sha256
cafd07bfbb9a6e05, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).