main
Ray
Publish 0.1.0
025fdf5
P25Q32SH-SUH-IT
(PUYA) · NOR FLASH · SOP-8
P25Q32SH-SUH-IT from (PUYA), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input for the device. |
| 2 | SO | bidirectional | Serial data output for 1 x I/O; serial data input and output (SIO1) for 4 x I/O read mode. |
| 3 | WP# | bidirectional | Write protection, active low; serial data input and output (SIO2) for 4 x I/O read mode, and WP# function is only available for Standard/Dual SPI. |
| 4 | GND | power_in | Ground of the device. |
| 5 | SI | bidirectional | Serial data input for 1 x I/O; serial data input and output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Serial interface clock input. |
| 7 | HOLD#/RESET# | bidirectional | Hardware reset pin, active low, or pauses the device without deselecting it; serial data input and output (SIO3) for 4 x I/O read mode, and HOLD#/RESET# function is only available for Standard/Dual SPI. |
| 8 | VCC | power_in | Power supply of the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | (PUYA) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 8 | |||
| Operation Temperature | -40 | 85 | °C | 8 | |||
| Maximum Operation Voltage | 4 | V | 8 | ||||
| Voltage on Any Pin with respect to Ground | -0.6 | 4.1 | V | 8 | |||
| DC Output Current | 5 | mA | 8 | ||||
| Supply voltage (Single supply, Read/Erase/Program) | VCC | 2.3 | 3.6 | V | 4 | ||
| Operating temperature range | Ta | -40 | 85 | °C | Ta=-40°C to +85°C | 9 | |
| Output Capacitance | COUT | 8 | pF | VOUT=GND | 8 | ||
| Input Capacitance | CIN | 6 | pF | VIN=GND | 8 | ||
| Deep power down current | IDPD | 0.3 | 5 | uA | CS#=Vcc, all other inputs at 0V or Vcc | 9 | |
| Standby current | ISB | 10 | 15 | uA | CS#, HOLD#, WP#=VIH all inputs at CMOS levels | 9 | |
| Read current (STR) (1, 2, 4 IO) | ICC1 | 7.5 | 10 | mA | f=85MHz; IOUT=0mA | 9 | |
| Read current (STR) (1, 2, 4 IO) | ICC1 | 11 | 15 | mA | f=120MHz; IOUT=0mA | 9 | |
| Read current (DTR) (1, 2, 4 IO) | ICC2 | 7 | 9 | mA | f=50MHz; IOUT=0mA | 9 | |
| Read current (DTR) (1, 2, 4 IO) | ICC2 | 9.5 | 13 | mA | f=70MHz; IOUT=0mA | 9 | |
| Program current | ICC3 | 3 | 4 | mA | CS#=Vcc | 9 | |
| Erase current | ICC4 | 3 | 4 | mA | CS#=Vcc | 9 | |
| Input load current | ILI | 1 | uA | All inputs at CMOS level | 9 | ||
| Output leakage | ILO | 1 | uA | All inputs at CMOS level | 9 | ||
| Output low voltage | VOL | 0.2 | V | IOL=100uA | 9 | ||
| Clock Frequency for FREAD, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 120 | MHz | 10 | |||
| Clock Frequency for READ instructions | fRSCLK | 55 | MHz | 10 | |||
| Clock Frequency for 2READ, DREAD instructions | fTSCLK | 120 | MHz | 10 | |||
| Clock Frequency for 4READ, QREAD, QPI 0Bh, QPI EBh, QPI 0Ch instructions | fQ | 120 | MHz | 10 | |||
| Clock Frequency for DTR instructions | fD | 66 | MHz | 10 | |||
| Clock Frequency for QPP (Quad page program) | fQPP | 120 | MHz | 10 | |||
| Clock High Time | tCH | 3.5 | ns | 10 | |||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | ns | 10 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | ns | 10 | |||
| Data In Setup Time | tDVCH | 2 | ns | 10 | |||
| Data In Hold Time | tCHDX | 3 | ns | 10 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 10 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 10 | |||
| CS# Deselect Time From Read to next Read | tSHSL | 20 | ns | CS# Deselect Time From Read to next Read | 10 | ||
| CS# Deselect Time From Write, Erase, Program to Read Status Register | tSHSL | 30 | ns | CS# Deselect Time From Write,Erase,Program to Read Status Register | 10 | ||
| Output Disable Time | tSHQZ | 6 | ns | 10 | |||
| Clock Low to Output Valid | tCLQV | 7 | ns | Loading 30pF | 10 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | Loading 15pF | 10 | ||
| Output Hold Time | tCLQX | 0 | ns | 10 | |||
| HOLD# Active Setup Time (relative to SCLK) | tHLCH | 5 | ns | 10 | |||
| HOLD# Active Hold Time (relative to SCLK) | tCHHH | 5 | ns | 10 | |||
| HOLD# Not Active Setup Time (relative to SCLK) | tHHCH | 5 | ns | 10 | |||
| HOLD# Not Active Hold Time (relative to SCLK) | tCHHL | 5 | ns | 10 | |||
| HOLD# to Output Low-Z | tHHQX | 6 | ns | 10 | |||
| HOLD# to Output High-Z | tHLQZ | 6 | ns | 10 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | 10 | |||
| Write Protect Hold Time | tSHWL | 100 | ns | 10 | |||
| CS# High to Deep Power-down Mode | tDP | 3 | us | 10 | |||
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | 8 | us | 10 | |||
| Write Status Register Cycle Time | tW | 8 | 12 | ms | 10 | ||
| Erase Suspend Latency | TESL | 30 | us | 12 | |||
| Program Suspend Latency | TPSL | 30 | us | 12 | |||
| Latency between Program Resume and next Suspend | TPRS | 20 | 100 | us | 12 | ||
| Latency between Erase Resume and next Suspend | TERS | 20 | 100 | us | 12 | ||
| Page program time (up to 256 bytes) | tPP | 1.6 | 2.5 | ms | 12 | ||
| Page erase time | tPE | 16 | 30 | ms | 12 | ||
| Sector erase time | tSE | 16 | 30 | ms | 12 | ||
| Block erase time for 32K bytes | tBE1 | 16 | 30 | ms | 12 | ||
| Block erase time for 64K bytes | tBE2 | 16 | 30 | ms | 12 | ||
| Chip erase time | tCE | 96 | 160 | ms | 12 |
CAD (KiCad official)
- Symbol:
P25Q32SH-SUH-IT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
p25q32sh-suh-it-etched.step/p25q32sh-suh-it-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p25q32sh-suh-it.step/p25q32sh-suh-it.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: (PUYA) datasheet (106 pp, sha256
1d0b794ea00abe23, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P25Q32SH-SUH-IT
**(PUYA)** · NOR FLASH · SOP-8
P25Q32SH-SUH-IT from (PUYA), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input for the device. |
| 2 | SO | bidirectional | Serial data output for 1 x I/O; serial data input and output (SIO1) for 4 x I/O read mode. |
| 3 | WP# | bidirectional | Write protection, active low; serial data input and output (SIO2) for 4 x I/O read mode, and WP# function is only available for Standard/Dual SPI. |
| 4 | GND | power_in | Ground of the device. |
| 5 | SI | bidirectional | Serial data input for 1 x I/O; serial data input and output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Serial interface clock input. |
| 7 | HOLD#/RESET# | bidirectional | Hardware reset pin, active low, or pauses the device without deselecting it; serial data input and output (SIO3) for 4 x I/O read mode, and HOLD#/RESET# function is only available for Standard/Dual SPI. |
| 8 | VCC | power_in | Power supply of the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | (PUYA) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | | -65 | | 150 | °C | | 8 |
| Operation Temperature | | -40 | | 85 | °C | | 8 |
| Maximum Operation Voltage | | | | 4 | V | | 8 |
| Voltage on Any Pin with respect to Ground | | -0.6 | | 4.1 | V | | 8 |
| DC Output Current | | | | 5 | mA | | 8 |
| Supply voltage (Single supply, Read/Erase/Program) | VCC | 2.3 | | 3.6 | V | | 4 |
| Operating temperature range | Ta | -40 | | 85 | °C | Ta=-40°C to +85°C | 9 |
| Output Capacitance | COUT | | | 8 | pF | VOUT=GND | 8 |
| Input Capacitance | CIN | | | 6 | pF | VIN=GND | 8 |
| Deep power down current | IDPD | | 0.3 | 5 | uA | CS#=Vcc, all other inputs at 0V or Vcc | 9 |
| Standby current | ISB | | 10 | 15 | uA | CS#, HOLD#, WP#=VIH all inputs at CMOS levels | 9 |
| Read current (STR) (1, 2, 4 IO) | ICC1 | | 7.5 | 10 | mA | f=85MHz; IOUT=0mA | 9 |
| Read current (STR) (1, 2, 4 IO) | ICC1 | | 11 | 15 | mA | f=120MHz; IOUT=0mA | 9 |
| Read current (DTR) (1, 2, 4 IO) | ICC2 | | 7 | 9 | mA | f=50MHz; IOUT=0mA | 9 |
| Read current (DTR) (1, 2, 4 IO) | ICC2 | | 9.5 | 13 | mA | f=70MHz; IOUT=0mA | 9 |
| Program current | ICC3 | | 3 | 4 | mA | CS#=Vcc | 9 |
| Erase current | ICC4 | | 3 | 4 | mA | CS#=Vcc | 9 |
| Input load current | ILI | | | 1 | uA | All inputs at CMOS level | 9 |
| Output leakage | ILO | | | 1 | uA | All inputs at CMOS level | 9 |
| Output low voltage | VOL | | | 0.2 | V | IOL=100uA | 9 |
| Clock Frequency for FREAD, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | | | 120 | MHz | | 10 |
| Clock Frequency for READ instructions | fRSCLK | | | 55 | MHz | | 10 |
| Clock Frequency for 2READ, DREAD instructions | fTSCLK | | | 120 | MHz | | 10 |
| Clock Frequency for 4READ, QREAD, QPI 0Bh, QPI EBh, QPI 0Ch instructions | fQ | | | 120 | MHz | | 10 |
| Clock Frequency for DTR instructions | fD | | | 66 | MHz | | 10 |
| Clock Frequency for QPP (Quad page program) | fQPP | | | 120 | MHz | | 10 |
| Clock High Time | tCH | 3.5 | | | ns | | 10 |
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | | | ns | | 10 |
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | | | ns | | 10 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 10 |
| Data In Hold Time | tCHDX | 3 | | | ns | | 10 |
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | | | ns | | 10 |
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | | | ns | | 10 |
| CS# Deselect Time From Read to next Read | tSHSL | 20 | | | ns | CS# Deselect Time From Read to next Read | 10 |
| CS# Deselect Time From Write, Erase, Program to Read Status Register | tSHSL | 30 | | | ns | CS# Deselect Time From Write,Erase,Program to Read Status Register | 10 |
| Output Disable Time | tSHQZ | | | 6 | ns | | 10 |
| Clock Low to Output Valid | tCLQV | | | 7 | ns | Loading 30pF | 10 |
| Clock Low to Output Valid | tCLQV | | | 6 | ns | Loading 15pF | 10 |
| Output Hold Time | tCLQX | 0 | | | ns | | 10 |
| HOLD# Active Setup Time (relative to SCLK) | tHLCH | 5 | | | ns | | 10 |
| HOLD# Active Hold Time (relative to SCLK) | tCHHH | 5 | | | ns | | 10 |
| HOLD# Not Active Setup Time (relative to SCLK) | tHHCH | 5 | | | ns | | 10 |
| HOLD# Not Active Hold Time (relative to SCLK) | tCHHL | 5 | | | ns | | 10 |
| HOLD# to Output Low-Z | tHHQX | | | 6 | ns | | 10 |
| HOLD# to Output High-Z | tHLQZ | | | 6 | ns | | 10 |
| Write Protect Setup Time | tWHSL | 20 | | | ns | | 10 |
| Write Protect Hold Time | tSHWL | 100 | | | ns | | 10 |
| CS# High to Deep Power-down Mode | tDP | | | 3 | us | | 10 |
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | | | 8 | us | | 10 |
| Write Status Register Cycle Time | tW | | 8 | 12 | ms | | 10 |
| Erase Suspend Latency | TESL | | | 30 | us | | 12 |
| Program Suspend Latency | TPSL | | | 30 | us | | 12 |
| Latency between Program Resume and next Suspend | TPRS | 20 | | 100 | us | | 12 |
| Latency between Erase Resume and next Suspend | TERS | 20 | | 100 | us | | 12 |
| Page program time (up to 256 bytes) | tPP | | 1.6 | 2.5 | ms | | 12 |
| Page erase time | tPE | | 16 | 30 | ms | | 12 |
| Sector erase time | tSE | | 16 | 30 | ms | | 12 |
| Block erase time for 32K bytes | tBE1 | | 16 | 30 | ms | | 12 |
| Block erase time for 64K bytes | tBE2 | | 16 | 30 | ms | | 12 |
| Chip erase time | tCE | | 96 | 160 | ms | | 12 |
## CAD (KiCad official)
- Symbol: `P25Q32SH-SUH-IT`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `p25q32sh-suh-it-etched.step` / `p25q32sh-suh-it-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p25q32sh-suh-it.step` / `p25q32sh-suh-it.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [(PUYA) datasheet](docs/p25q32sh-suh-it-datasheet.pdf) (106 pp, sha256 `1d0b794ea00abe23`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p25q32sh-suh-it-datasheet.pdf)