main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers p25q21l-uxh-ir: viewers · Ray
p25q21l-uxh-ir-etched.glb Publish 0.1.0 · Ray
p25q21l-uxh-ir-etched.step p25q21l-uxh-ir: factory component page (tier=lcsc) · Ray
p25q21l-uxh-ir-hero.glb p25q21l-uxh-ir: hero GLB from the etched model (keeps the MPN mark) · Ray
p25q21l-uxh-ir-hero.overlay.json Publish 0.1.0 · Ray
p25q21l-uxh-ir.glb Publish 0.1.0 · Ray
p25q21l-uxh-ir.kicad_mod Publish 0.1.0 · Ray
p25q21l-uxh-ir.kicad_sym Publish 0.1.0 · Ray
p25q21l-uxh-ir.lbr Publish 0.1.0 · Ray
p25q21l-uxh-ir.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

P25Q21L-UXH-IR

(PUYA) · NOR FLASH · USON-8-EP(2x3)

P25Q21L-UXH-IR from (PUYA), in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip select input.
2 SO bidirectional Serial data output (SIO1) for 1x I/O, and serial data input and output for 4x I/O read mode.
3 WP# bidirectional Active-low write protection input (SIO2), also serial data input and output for 4x I/O read mode.
4 GND power_in Ground of the device.
5 SI bidirectional Serial data input (SIO0) for 1x I/O, and serial data input and output for 4x I/O read mode.
6 SCLK input Serial interface clock input.
7 HOLD# bidirectional Pauses the device without deselecting it (SIO3), also serial data input and output for 4x I/O read mode.
8 VCC power_in Power supply of the device, 1.65V to 2.0V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer (PUYA)
Package USON-8-EP(2x3)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.65 2 V Read, Erase and Program 4
Operating temperature -40 85 °C Industrial 4
Storage temperature -65 150 °C 8
Operation temperature -40 85 °C 8
Maximum operation voltage 2.5 V 8
Voltage on any pin with respect to ground -0.6 2.5 V 8
DC output current 5 mA 8
Output capacitance COUT 8 pF VOUT=GND; TA=25°C, F=1MHz, Vcc=1.8V 8
Input capacitance CIN 6 pF VIN=GND; TA=25°C, F=1MHz, Vcc=1.8V 8
Deep power down current IDPD 0.1 0.6 uA CS#=Vcc, all other inputs at 0V or Vcc 9
Standby current ISB 9 uA CS#, HOLD#, WP#=VIH all inputs at CMOS levels 9
Low power read current (03h) ICC1 0.5 1 mA f=1MHz; IOUT=0mA 9
Read current (0Bh) ICC2 0.6 1 mA f=50MHz; IOUT=0mA 9
Read current (0Bh) ICC2 1 2 mA f=85MHz; IOUT=0mA 9
Program current ICC3 1 2 mA CS#=Vcc 9
Erase current ICC4 1 2 mA CS#=Vcc 9
Input load current ILI 1 uA All inputs at CMOS level 9
Output leakage ILO 1 uA All inputs at CMOS level 9
Output low voltage VOL 0.2 V IOL=100uA 9
Clock frequency (FAST_READ, RDSFDP, PP, SE, etc.) fSCLK 85 MHz 1.65V~2.0V; min D.C. 10
Clock frequency for READ fRSCLK 33 MHz READ instructions 10
Clock frequency for 2READ, DREAD fTSCLK 85 MHz 2READ, DREAD instructions 10
Clock frequency for 4READ, QREAD fQ 70 MHz 4READ, QREAD instructions 10
Clock frequency for QPP fQPP 85 MHz Quad page program 10
Clock high time tCH 5.5 ns 10
Clock low time tCL 5.5 ns 10
CS# active setup time tSLCH 5 ns relative to SCLK 10
CS# not active hold time tCHSL 5 ns relative to SCLK 10
Data in setup time tDVCH 2 ns 10
Data in hold time tCHDX 3 ns 10
CS# active hold time tCHSH 5 ns relative to SCLK 10
CS# not active setup time tSHCH 5 ns relative to SCLK 10
CS# deselect time from read to next read tSHSL 20 ns 10
CS# deselect time from write, erase, program to read status register tSHSL 30 ns 10
Output disable time tSHQZ 6 ns 10
Clock low to output valid tCLQV 7 ns Loading 30pF 10
Clock low to output valid tCLQV 6 ns Loading 15pF 10
HOLD# active setup time tHLCH 5 ns relative to SCLK 10
HOLD# active hold time tCHHH 5 ns relative to SCLK 10
HOLD# not active setup time tHHCH 5 ns relative to SCLK 10
HOLD# not active hold time tCHHL 5 ns relative to SCLK 10
HOLD# to output Low-Z tHHQX 6 ns 10
HOLD# to output High-Z tHLQZ 6 ns 10
Write protect setup time tWHSL 20 ns Only applicable for WRSR instruction 10
Write protect hold time tSHWL 100 ns Only applicable for WRSR instruction 10
CS# high to deep power-down mode tDP 3 us 10
Write status register cycle time tW 8 12 ms 10
Erase suspend latency TESL 30 us 11
Program suspend latency TPSL 30 us 11
Latency between program resume and next suspend TPRS 0.3 us 11
Latency between erase resume and next suspend TERS 0.3 us 11
Page program time (up to 256 bytes) tPP 2 3 ms 11
Page erase time tPE 8 20 ms 11
Sector erase time tSE 8 20 ms 11
Block erase time for 32K bytes tBE1 8 20 ms 11
Block erase time for 64K bytes tBE2 8 20 ms 11
Chip erase time tCE 8 20 ms 11

CAD (KiCad official)

  • Symbol: P25Q21L-UXH-IR
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: p25q21l-uxh-ir-etched.step / p25q21l-uxh-ir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); p25q21l-uxh-ir.step / p25q21l-uxh-ir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: (PUYA) datasheet (76 pp, sha256 8b51ab5dbafb8c21, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF