main
Ray
Publish 0.1.0
0fa9b98
P25Q21H-SSH-IR
PUYA) · NOR FLASH · SOP-8-150mil
P25Q21H-SSH-IR from PUYA), in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input for the serial interface. |
| 2 | SO | bidirectional | Serial data output for 1 x I/O; serial data input and output (SIO1) for 4 x I/O read mode. |
| 3 | WP# | bidirectional | Write protection, active low; serial data input and output (SIO2) for 4 x I/O read mode. |
| 4 | GND | power_in | Ground of the device. |
| 5 | SI | bidirectional | Serial data input for 1 x I/O; serial data input and output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Serial interface clock input. |
| 7 | HOLD# | bidirectional | Pauses the device without deselecting it; serial data input and output (SIO3) for 4 x I/O read mode. |
| 8 | VCC | power_in | Power supply of the device, 2.3 V to 3.6 V per the datasheet overview. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA) |
| Package | SOP-8-150mil |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | -65 | 150 | °C | 8 | |||
| Operation temperature | -40 | 85 | °C | 8 | |||
| Maximum operation voltage | 4 | V | 8 | ||||
| Voltage on any pin with respect to ground | -0.6 | 4.1 | V | 8 | |||
| DC output current | 5 | mA | 8 | ||||
| Supply voltage (single supply, read/erase/program) | Vcc | 2.3 | 3.6 | V | 4 | ||
| Industrial operating temperature range | -40 | 85 | C | 4 | |||
| Output capacitance | COUT | 8 | pF | VOUT=GND | 8 | ||
| Input capacitance | CIN | 6 | pF | VIN=GND | 8 | ||
| Deep power down current | IDPD | 0.3 | 1.5 | uA | CS#=Vcc, all other inputs at 0V or Vcc | 9 | |
| Standby current | ISB | 9 | uA | CS#, HOLD#, WP#=VIH, all inputs at CMOS levels | 9 | ||
| Low power read current (03h) | ICC1 | 0.5 | 1 | mA | f=1MHz; IOUT=0mA | 9 | |
| Read current (0Bh) | ICC2 | 1 | 2 | mA | f=50MHz; IOUT=0mA | 9 | |
| Read current (0Bh) | ICC2 | 1.5 | 2.5 | mA | f=85MHz; IOUT=0mA | 9 | |
| Program current | ICC3 | 1.5 | 3 | mA | CS#=Vcc | 9 | |
| Erase current | ICC4 | 1.5 | 3 | mA | CS#=Vcc | 9 | |
| Input load current | ILI | 1 | uA | All inputs at CMOS level | 9 | ||
| Output leakage | ILO | 1 | uA | All inputs at CMOS level | 9 | ||
| Output low voltage | VOL | 0.2 | V | IOL=100uA | 9 | ||
| Clock frequency for FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 104 | MHz | 10 | |||
| Clock frequency for READ instructions | fRSCLK | 55 | MHz | 10 | |||
| Clock frequency for 2READ, DREAD instructions | fTSCLK | 104 | MHz | 10 | |||
| Clock frequency for 4READ, QREAD instructions | fQ | 104 | MHz | 10 | |||
| Clock high time | tCH | 4.5 | ns | 10 | |||
| Clock low time (fSCLK) | tCL | 4.5 | ns | Printed min also as 45% x (1/fSCLK) | 10 | ||
| CS# active setup time (relative to SCLK) | tSLCH | 5 | ns | 10 | |||
| CS# not active hold time (relative to SCLK) | tCHSL | 5 | ns | 10 | |||
| Data in setup time | tDVCH | 2 | ns | 10 | |||
| Data in hold time | tCHDX | 3 | ns | 10 | |||
| CS# active hold time (relative to SCLK) | tCHSH | 5 | ns | 10 | |||
| CS# not active setup time (relative to SCLK) | tSHCH | 5 | ns | 10 | |||
| CS# deselect time | tSHSL | 20 | ns | From Read to next Read | 10 | ||
| CS# deselect time | tSHSL | 30 | ns | From Write, Erase, Program to Read Status Register | 10 | ||
| Output disable time | tSHQZ | 6 | ns | 10 | |||
| Clock low to output valid | tCLQV | 7 | ns | Loading 30pF | 10 | ||
| Clock low to output valid | tCLQV | 6 | ns | Loading 15pF | 10 | ||
| Output hold time | tCLQX | 0 | ns | 10 | |||
| HOLD# active setup time (relative to SCLK) | tHLCH | 5 | ns | 10 | |||
| HOLD# active hold time (relative to SCLK) | tCHHH | 5 | ns | 10 | |||
| HOLD# to output low-Z | tHHQX | 6 | ns | 10 | |||
| HOLD# to output high-Z | tHLQZ | 6 | ns | 10 | |||
| Write protect setup time | tWHSL | 20 | ns | 10 | |||
| Write protect hold time | tSHWL | 100 | ns | 10 | |||
| CS# high to deep power-down mode | tDP | 3 | us | 10 | |||
| CS# high to standby mode without electronic signature read | tRES1 | 8 | us | 10 | |||
| CS# high to standby mode with electronic signature read | tRES2 | 8 | us | 10 | |||
| Write status register cycle time | tW | 8 | 12 | ms | 10 | ||
| Reset recovery time (for erase/program operation except WRSR) | tReady | 30 | us | 10 | |||
| Reset recovery time (for WRSR operation) | tReady | 8 | 12 | ms | 10 | ||
| Erase suspend latency | TESL | 30 | us | 11 | |||
| Program suspend latency | TPSL | 30 | us | 11 | |||
| Latency between program resume and next suspend | TPRS | 0.3 | us | Note 4: tPRS ≥ 100us must be included in resume-to-suspend loops | 11 | ||
| Latency between erase resume and next suspend | TERS | 0.3 | us | Note 5: tERS ≥ 200us must be included in resume-to-suspend loops | 11 | ||
| Page program time (up to 256 bytes) | tPP | 2 | 3 | ms | 11 | ||
| Page erase time | tPE | 8 | 20 | ms | 11 | ||
| Sector erase time | tSE | 8 | 20 | ms | 11 | ||
| Block erase time for 32K bytes | tBE1 | 8 | 20 | ms | 11 | ||
| Block erase time for 64K bytes | tBE2 | 8 | 20 | ms | 11 | ||
| Chip erase time | tCE | 8 | 20 | ms | 11 |
CAD (KiCad official)
- Symbol:
P25Q21H-SSH-IR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-150mil (KiCad packages3D, STEP)
- 3D model files:
p25q21h-ssh-ir-etched.step/p25q21h-ssh-ir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p25q21h-ssh-ir.step/p25q21h-ssh-ir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PUYA) datasheet (77 pp, sha256
fd31630975499983, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P25Q21H-SSH-IR
**PUYA)** · NOR FLASH · SOP-8-150mil
P25Q21H-SSH-IR from PUYA), in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input for the serial interface. |
| 2 | SO | bidirectional | Serial data output for 1 x I/O; serial data input and output (SIO1) for 4 x I/O read mode. |
| 3 | WP# | bidirectional | Write protection, active low; serial data input and output (SIO2) for 4 x I/O read mode. |
| 4 | GND | power_in | Ground of the device. |
| 5 | SI | bidirectional | Serial data input for 1 x I/O; serial data input and output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Serial interface clock input. |
| 7 | HOLD# | bidirectional | Pauses the device without deselecting it; serial data input and output (SIO3) for 4 x I/O read mode. |
| 8 | VCC | power_in | Power supply of the device, 2.3 V to 3.6 V per the datasheet overview. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA) |
| Package | SOP-8-150mil |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | | -65 | | 150 | °C | | 8 |
| Operation temperature | | -40 | | 85 | °C | | 8 |
| Maximum operation voltage | | | | 4 | V | | 8 |
| Voltage on any pin with respect to ground | | -0.6 | | 4.1 | V | | 8 |
| DC output current | | | | 5 | mA | | 8 |
| Supply voltage (single supply, read/erase/program) | Vcc | 2.3 | | 3.6 | V | | 4 |
| Industrial operating temperature range | | -40 | | 85 | C | | 4 |
| Output capacitance | COUT | | | 8 | pF | VOUT=GND | 8 |
| Input capacitance | CIN | | | 6 | pF | VIN=GND | 8 |
| Deep power down current | IDPD | | 0.3 | 1.5 | uA | CS#=Vcc, all other inputs at 0V or Vcc | 9 |
| Standby current | ISB | | | 9 | uA | CS#, HOLD#, WP#=VIH, all inputs at CMOS levels | 9 |
| Low power read current (03h) | ICC1 | | 0.5 | 1 | mA | f=1MHz; IOUT=0mA | 9 |
| Read current (0Bh) | ICC2 | | 1 | 2 | mA | f=50MHz; IOUT=0mA | 9 |
| Read current (0Bh) | ICC2 | | 1.5 | 2.5 | mA | f=85MHz; IOUT=0mA | 9 |
| Program current | ICC3 | | 1.5 | 3 | mA | CS#=Vcc | 9 |
| Erase current | ICC4 | | 1.5 | 3 | mA | CS#=Vcc | 9 |
| Input load current | ILI | | | 1 | uA | All inputs at CMOS level | 9 |
| Output leakage | ILO | | | 1 | uA | All inputs at CMOS level | 9 |
| Output low voltage | VOL | | | 0.2 | V | IOL=100uA | 9 |
| Clock frequency for FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | | | 104 | MHz | | 10 |
| Clock frequency for READ instructions | fRSCLK | | | 55 | MHz | | 10 |
| Clock frequency for 2READ, DREAD instructions | fTSCLK | | | 104 | MHz | | 10 |
| Clock frequency for 4READ, QREAD instructions | fQ | | | 104 | MHz | | 10 |
| Clock high time | tCH | 4.5 | | | ns | | 10 |
| Clock low time (fSCLK) | tCL | 4.5 | | | ns | Printed min also as 45% x (1/fSCLK) | 10 |
| CS# active setup time (relative to SCLK) | tSLCH | 5 | | | ns | | 10 |
| CS# not active hold time (relative to SCLK) | tCHSL | 5 | | | ns | | 10 |
| Data in setup time | tDVCH | 2 | | | ns | | 10 |
| Data in hold time | tCHDX | 3 | | | ns | | 10 |
| CS# active hold time (relative to SCLK) | tCHSH | 5 | | | ns | | 10 |
| CS# not active setup time (relative to SCLK) | tSHCH | 5 | | | ns | | 10 |
| CS# deselect time | tSHSL | 20 | | | ns | From Read to next Read | 10 |
| CS# deselect time | tSHSL | 30 | | | ns | From Write, Erase, Program to Read Status Register | 10 |
| Output disable time | tSHQZ | | | 6 | ns | | 10 |
| Clock low to output valid | tCLQV | | | 7 | ns | Loading 30pF | 10 |
| Clock low to output valid | tCLQV | | | 6 | ns | Loading 15pF | 10 |
| Output hold time | tCLQX | 0 | | | ns | | 10 |
| HOLD# active setup time (relative to SCLK) | tHLCH | 5 | | | ns | | 10 |
| HOLD# active hold time (relative to SCLK) | tCHHH | 5 | | | ns | | 10 |
| HOLD# to output low-Z | tHHQX | | | 6 | ns | | 10 |
| HOLD# to output high-Z | tHLQZ | | | 6 | ns | | 10 |
| Write protect setup time | tWHSL | 20 | | | ns | | 10 |
| Write protect hold time | tSHWL | 100 | | | ns | | 10 |
| CS# high to deep power-down mode | tDP | | | 3 | us | | 10 |
| CS# high to standby mode without electronic signature read | tRES1 | | | 8 | us | | 10 |
| CS# high to standby mode with electronic signature read | tRES2 | | | 8 | us | | 10 |
| Write status register cycle time | tW | | 8 | 12 | ms | | 10 |
| Reset recovery time (for erase/program operation except WRSR) | tReady | | | 30 | us | | 10 |
| Reset recovery time (for WRSR operation) | tReady | | 8 | 12 | ms | | 10 |
| Erase suspend latency | TESL | | | 30 | us | | 11 |
| Program suspend latency | TPSL | | | 30 | us | | 11 |
| Latency between program resume and next suspend | TPRS | | | 0.3 | us | Note 4: tPRS ≥ 100us must be included in resume-to-suspend loops | 11 |
| Latency between erase resume and next suspend | TERS | | | 0.3 | us | Note 5: tERS ≥ 200us must be included in resume-to-suspend loops | 11 |
| Page program time (up to 256 bytes) | tPP | | 2 | 3 | ms | | 11 |
| Page erase time | tPE | | 8 | 20 | ms | | 11 |
| Sector erase time | tSE | | 8 | 20 | ms | | 11 |
| Block erase time for 32K bytes | tBE1 | | 8 | 20 | ms | | 11 |
| Block erase time for 64K bytes | tBE2 | | 8 | 20 | ms | | 11 |
| Chip erase time | tCE | | 8 | 20 | ms | | 11 |
## CAD (KiCad official)
- Symbol: `P25Q21H-SSH-IR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8-150mil (KiCad packages3D, STEP)
- 3D model files: `p25q21h-ssh-ir-etched.step` / `p25q21h-ssh-ir-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p25q21h-ssh-ir.step` / `p25q21h-ssh-ir.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PUYA) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757136957451583488) (77 pp, sha256 `fd31630975499983`, retrieved 2026-11-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p25q21h-ssh-ir-datasheet.pdf)