P25D80SH-SSH-IT

{
  "slug": "p25d80sh-ssh-it",
  "version": "0.1.0",
  "type": "component",
  "description": "PUYA NOR FLASH, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "p25d80sh-ssh-it",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p25d80sh-ssh-it.kicad_sym",
    "p25d80sh-ssh-it.kicad_mod",
    "p25d80sh-ssh-it.glb",
    "p25d80sh-ssh-it.step",
    "p25d80sh-ssh-it.lbr",
    "docs/hero.png",
    "docs/p25d80sh-ssh-it-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "p25d80sh-ssh-it-hero.glb",
    "p25d80sh-ssh-it-hero.overlay.json",
    "p25d80sh-ssh-it-etched.glb"
  ],
  "component": {
    "mpn": "P25D80SH-SSH-IT",
    "manufacturer": "PUYA",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757137311865942016",
    "parts": {
      "symbol": "p25d80sh-ssh-it.kicad_sym",
      "footprint": "p25d80sh-ssh-it.kicad_mod",
      "model_3d": "p25d80sh-ssh-it-hero.glb",
      "model_3d_plain": "p25d80sh-ssh-it-etched.glb",
      "model_3d_step": "p25d80sh-ssh-it-etched.step",
      "model_3d_step_plain": "p25d80sh-ssh-it.step",
      "lbr": "p25d80sh-ssh-it.lbr"
    },
    "distributor_links": {
      "lcsc": "C7419754"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T00:42:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip select input, which the datasheet lists as the device enable for serial transactions."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "bidirectional",
        "description": "Serial data output for 1 x I/O, and serial data input and output (SIO1) for 2 x I/O read mode."
      },
      {
        "number": "3",
        "name": "WP#",
        "type": "input",
        "description": "Write protection, active low; hardware locking of protected sectors is controlled by this pin per the Overview."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground of the device."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "bidirectional",
        "description": "Serial data input for 1 x I/O, and serial data input and output (SIO0) for 2 x I/O read mode."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input."
      },
      {
        "number": "7",
        "name": "HOLD#/RESET#",
        "type": "input",
        "description": "Hardware reset pin, active low, or pauses the device without deselecting it."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply of the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SS (SOP8 150mil) and SU (SOP8 208mil) variants share the same 8-pin numbering on page 6, so the ; Pin types are inferred from the Remarks column. SO and SI are marked bidirectional because the datas; The datasheet gives no per-pin electrical limits (voltage, current, or timing) in the pin table, so "
        ],
        "pages_sent": 11,
        "cost_usd": 0.033,
        "at": "2026-10-19T00:41:56"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757137311865942016",
        "pages": 56,
        "sha256": "cdae0238ef330908",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "p25d80sh-ssh-it.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "p25d80sh-ssh-it-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "725fb9f2c4928ca3c5d5ce34142540ec6b8131cb070371e9ca4a6ac8320125d8",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}