Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

P24C128D-TSH-MIR

PUYA) · EEPROM · TSSOP-8

P24C128D-TSH-MIR from PUYA), in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Slave address setting bit 0 (device address input); internally pulled down to GND if left floating, fixing the address bit to 0.
2 E1 input Slave address setting bit 1 (device address input); internally pulled down to GND if left floating, fixing the address bit to 0.
3 E2 input Slave address setting bit 2 (device address input); internally pulled down to GND if left floating, fixing the address bit to 0.
4 GND power_in Ground.
5 SDA bidirectional Serial data input and output; open-drain driven, may be wired-OR with other open-drain or open-collector devices and needs an external pull-up.
6 SCL input Serial clock input; clocks data in on the positive edge and data out on the negative edge.
7 WCB input Write control input; connected to VCC it inhibits all write operations, connected to GND (or left floating, internally pulled down) it allows normal writes.
8 VCC power_in Power supply, 1.7V to 5.5V for P24C128D-MI (the -MI grade of this MPN).

Key specifications

Parameter Value
Manufacturer PUYA)
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (P24C128D-MI) VCC 1.7 5.5 V P24C128D-MI 5
Operating temperature range (-MI) -40 85 °C P24C128D-MI 1
Standby Current Isb 1 µA Vcc = 3.3V, TA = 85°C 5
Standby Current Isb 2 µA Vcc = 5.5V, TA = 85°C 5
Supply Current Read ICC1 0.2 0.4 mA Vcc = 5.5V, Read at 400Khz 5
Supply Current Write ICC2 0.8 1.6 mA Vcc = 5.5V, Write at 400Khz 5
Input Leakage Current ILI 0.1 1 µA VIN = VCC or GND 5
Output Leakage Current ILO 0.05 1 µA VOUT = VCC or GND 5
Input Low Level VIL -0.6 0.3 xVCC (min in V) 5
Input High Level VIH 0.7 xVCC (max VCC+0.5 V) 5
Output Low Level VCC = 1.7V (SDA) VOL1 0.2 V IOL = 1.5 mA 5
Output Low Level VCC = 3.0V (SDA) VOL2 0.4 V IOL = 2.1 mA 5
Pull-down resistance on WCB Rpd 5 100 MΩ VIN = VCC 5
Pull-down resistance on WCB Rpd 10 30 kΩ VIN < VIL 5
Input / Output Capacitance (SDA) CI/O 8 pF VI/O=GND; TA=25°C, Freq.=1MHz, Vcc=5.0V 5
Input Capacitance (E0,E1,E2,WCB,SCL) CIN 6 pF VIN=GND; TA=25°C, Freq.=1MHz, Vcc=5.0V 5
Clock Frequency, SCL fSCL 400 kHz 1.7≤VCC<2.5 6
Clock Frequency, SCL fSCL 1000 kHz 2.5≤VCC≤5.5 6
Clock Pulse Width Low tLOW 1.3 µs 1.7≤VCC<2.5 6
Clock Pulse Width Low tLOW 0.4 µs 2.5≤VCC≤5.5 6
Clock Pulse Width High tHIGH 0.6 µs 1.7≤VCC<2.5 6
Clock Pulse Width High tHIGH 0.4 µs 2.5≤VCC≤5.5 6
Clock Low to Data Out Valid tAA 0.05 0.9 µs 1.7≤VCC<2.5 6
Clock Low to Data Out Valid tAA 0.05 0.55 µs 2.5≤VCC≤5.5 6
Noise Suppression Time tI 0.1 µs 1.7≤VCC<2.5 6
Noise Suppression Time tI 0.05 µs 2.5≤VCC≤5.5 6
Bus free time before new transmission tBUF 1.3 µs 1.7≤VCC<2.5 6
Bus free time before new transmission tBUF 0.5 µs 2.5≤VCC≤5.5 6
START Hold Time tHD.STA 0.6 µs 1.7≤VCC<2.5 6
START Hold Time tHD.STA 0.25 µs 2.5≤VCC≤5.5 6
START Setup Time tSU.STA 0.6 µs 1.7≤VCC<2.5 6
START Setup Time tSU.STA 0.25 µs 2.5≤VCC≤5.5 6
Data In Hold Time tHD.DAT 0 µs 1.7≤VCC<2.5 6
Data In Setup Time tSU.DAT 0.1 µs 1.7≤VCC<2.5 6
Inputs Rise Time tR 0.3 µs 1.7≤VCC<2.5 6
Inputs Fall Time tF 0.3 µs 1.7≤VCC<2.5 6
Inputs Fall Time tF 0.1 µs 2.5≤VCC≤5.5 6
STOP Setup Time tSU.STO 0.6 µs 1.7≤VCC<2.5 6
STOP Setup Time tSU.STO 0.25 µs 2.5≤VCC≤5.5 6
Data Out Hold Time tDH 0.05 µs 1.7≤VCC<2.5 6
WCB pin Setup Time tSU.WCB 1.2 µs 1.7≤VCC<2.5 6
WCB pin Setup Time tSU.WCB 0.6 µs 2.5≤VCC≤5.5 6
WCB pin Hold Time tHD.WCB 1.2 µs 1.7≤VCC<2.5 6
WCB pin Hold Time tHD.WCB 0.6 µs 2.5≤VCC≤5.5 6
Write Cycle Time tWR 5 ms 1.7≤VCC<2.5 6
Endurance EDR 1e+06 Write cycles 25°C, 5.5V, Page mode 6
Data retention DRET 100 Years 6
Storage Temperature -65 150 °C 5
Operation Temperature -40 125 °C 5
Maximum Operation Voltage 6.25 V 5
Voltage on Any Pin with Respect to Ground -1 V upper limit (Vcc+1.0) V 5
DC Output Current 5 mA 5

CAD (KiCad official)

  • Symbol: P24C128D-TSH-MIR
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: p24c128d-tsh-mir-etched.step / p24c128d-tsh-mir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); p24c128d-tsh-mir.step / p24c128d-tsh-mir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PUYA) datasheet (25 pp, sha256 4e7c982781c7caea, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF