3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownP24C04C-SSH-MIR
PUYA · EEPROM · SOP-8
P24C04C-SSH-MIR from PUYA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | unconnected | Slave address setting pin for P24C02C only; on the P24C04C it is not connected (NC), and if left floating it is internally pulled down to GND. |
| 2 | E1 | input | Device address input used for slave address setting on the P24C04C; if left floating it is internally pulled down to GND and the address bit is fixed to 0. |
| 3 | E2 | input | Device address input used for slave address setting on the P24C02C/04C/08C; if left floating it is internally pulled down to GND and the address bit is fixed to 0. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial data input/output that may be wire-ORed with other open-drain or open-collector devices, and requires an external pull-up (VOL is at most 0.4 V at VCC = 3.0 V and IOL = 2.1 mA). |
| 6 | SCL | input | Serial clock input that positive-edge clocks data in and negative-edge clocks data out; maximum clock frequency is 1 MHz for VCC of 2.5 V to 5.5 V and 400 kHz for VCC of 1.7 V to 2.5 V. |
| 7 | WCB | input | Active-low write control: connecting it to VCC inhibits all write operations to the memory, connecting it to GND allows normal writes, and if left floating it is internally pulled down to GND. |
| 8 | VCC | power_in | Supply voltage: 1.7 V to 5.5 V for the -MI grade, 1.8 V to 5.5 V for -NK, and 2.5 V to 5.5 V for -DE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
P24C04C-SSH-MIR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
p24c04c-ssh-mir-etched.step/p24c04c-ssh-mir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p24c04c-ssh-mir.step/p24c04c-ssh-mir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PUYA datasheet (25 pp, sha256
56460f551ddc4cc4, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).