P24C02A-TSH-MIR

{
  "slug": "p24c02a-tsh-mir",
  "version": "0.1.0",
  "type": "component",
  "description": "PUYA EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "p24c02a-tsh-mir",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p24c02a-tsh-mir.kicad_sym",
    "p24c02a-tsh-mir.kicad_mod",
    "p24c02a-tsh-mir.glb",
    "p24c02a-tsh-mir.step",
    "p24c02a-tsh-mir.lbr",
    "docs/hero.png",
    "docs/p24c02a-tsh-mir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "p24c02a-tsh-mir-hero.glb",
    "p24c02a-tsh-mir-hero.overlay.json",
    "p24c02a-tsh-mir-etched.glb"
  ],
  "component": {
    "mpn": "P24C02A-TSH-MIR",
    "manufacturer": "PUYA",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588945501987483649",
    "parts": {
      "symbol": "p24c02a-tsh-mir.kicad_sym",
      "footprint": "p24c02a-tsh-mir.kicad_mod",
      "model_3d": "p24c02a-tsh-mir-hero.glb",
      "model_3d_plain": "p24c02a-tsh-mir-etched.glb",
      "model_3d_step": "p24c02a-tsh-mir-etched.step",
      "model_3d_step_plain": "p24c02a-tsh-mir.step",
      "lbr": "p24c02a-tsh-mir.lbr"
    },
    "distributor_links": {
      "lcsc": "C2885775"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T10:31:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Device address bit 0 input that must match its hardwired level for the chip to respond, and it is internally pulled down to GND if left floating."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Device address bit 1 input that must match its hardwired level for the chip to respond, and it is internally pulled down to GND if left floating."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Device address bit 2 input that must match its hardwired level for the chip to respond, and it is internally pulled down to GND if left floating."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial data input/output that may be wire-ORed with other open-drain or open-collector devices and is normally pulled high by an external resistor."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that clocks data in on the positive edge and clocks data out on the negative edge; the Schmitt-trigger input has a maximum fSCL of 400 kHz for 1.7 V ≤ VCC < 2.5 V and 1000 kHz for 2.5 V ≤ VCC ≤ 5.5 V."
      },
      {
        "number": "7",
        "name": "WCB",
        "type": "input",
        "description": "Active-low write control: tying it to VCC inhibits all write operations, tying it to GND allows normal writes, and if left floating it is internally pulled down to GND (writes enabled)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage; the -MI grade (this MPN) is specified for 1.7 V to 5.5 V with absolute maximum operating voltage of 6.25 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet has no pin table specific to TSSOP-8. Table 1-1 (page 2) gives one 8-pin assignment fo; Table 1-1 lists E0 as type 'I/O', but the text (page 3 and page 9) describes E0 as a device address ; Table 1-1 lists SDA as I/O and section 1.3 describes it as open-drain bidirectional. Mapped to KiCad"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0584,
        "at": "2026-10-20T10:31:22"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588945501987483649",
        "pages": 20,
        "sha256": "544fbedeccde1c1c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "p24c02a-tsh-mir.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "p24c02a-tsh-mir-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c79b7576186a93ba9d88d24f825b2744a3a89bb5582b08bff250c76628fd773f",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}