component
P2300SBLRP
Public Made by Adomby adom
Littelfuse Thyristor Surge Suppressors (TSS), DO-214AA. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
P2300SBLRP
Littelfuse · Thyristor Surge Suppressors (TSS) · DO-214AA
P2300SBLRP from Littelfuse, in a DO-214AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T1 | passive | One terminal of the bidirectional SIDACtor thyristor; for P2300SBLRP VDRM is 190 V min at IDRM=5 µA and VS is 260 V max at 100 V/µs, and the terminals are interchangeable. |
| 2 | T2 | passive | Second terminal of the bidirectional SIDACtor thyristor; for P2300SBLRP VDRM is 190 V min at IDRM=5 µA and VS is 260 V max at 100 V/µs, and the terminals are interchangeable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse |
| Package | DO-214AA |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Repetitive Peak Off-State Voltage | VDRM | 190 | V | @IDRM=5µA | 2 | ||
| Switching Voltage | VS | 260 | V | @100V/µs | 2 | ||
| Holding Current | IH | 150 | mA | 2 | |||
| Switching Current | IS | 800 | mA | 2 | |||
| On-State Current | IT | 2.2 | A | 2 | |||
| On-State Voltage | VT | 4 | V | @IT=2.2 Amps | 2 | ||
| Capacitance | 20 | 50 | pF | @1MHz, 2V bias | 2 | ||
| Critical Rate of Rise of On-State Current | di/dt | 500 | Amps/µs | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 3 | ||
| Thermal Resistance Junction to Ambient | RθJA | 90 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Pb-free and the terminal finish material is tin(Sn) | 1 |
CAD (KiCad official)
- Symbol:
P2300SBLRP - Footprint:
Diode_SMD:D_SMB - 3D model: DO-214AA (KiCad packages3D, STEP)
- 3D model files:
p2300sblrp-etched.step/p2300sblrp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p2300sblrp.step/p2300sblrp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse datasheet (5 pp, sha256
1e52689e15a88334, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P2300SBLRP
**Littelfuse** · Thyristor Surge Suppressors (TSS) · DO-214AA
P2300SBLRP from Littelfuse, in a DO-214AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T1 | passive | One terminal of the bidirectional SIDACtor thyristor; for P2300SBLRP VDRM is 190 V min at IDRM=5 µA and VS is 260 V max at 100 V/µs, and the terminals are interchangeable. |
| 2 | T2 | passive | Second terminal of the bidirectional SIDACtor thyristor; for P2300SBLRP VDRM is 190 V min at IDRM=5 µA and VS is 260 V max at 100 V/µs, and the terminals are interchangeable. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse |
| Package | DO-214AA |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Repetitive Peak Off-State Voltage | VDRM | 190 | | | V | @IDRM=5µA | 2 |
| Switching Voltage | VS | | | 260 | V | @100V/µs | 2 |
| Holding Current | IH | 150 | | | mA | | 2 |
| Switching Current | IS | | | 800 | mA | | 2 |
| On-State Current | IT | | | 2.2 | A | | 2 |
| On-State Voltage | VT | | | 4 | V | @IT=2.2 Amps | 2 |
| Capacitance | | 20 | | 50 | pF | @1MHz, 2V bias | 2 |
| Critical Rate of Rise of On-State Current | di/dt | | | 500 | Amps/µs | | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 150 | °C | | 3 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 3 |
| Thermal Resistance Junction to Ambient | RθJA | | 90 | | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Pb-free and the terminal finish material is tin(Sn) | 1 |
## CAD (KiCad official)
- Symbol: `P2300SBLRP`
- Footprint: `Diode_SMD:D_SMB`
- 3D model: DO-214AA (KiCad packages3D, STEP)
- 3D model files: `p2300sblrp-etched.step` / `p2300sblrp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p2300sblrp.step` / `p2300sblrp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Littelfuse datasheet](docs/p2300sblrp-datasheet.pdf) (5 pp, sha256 `1e52689e15a88334`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p2300sblrp-datasheet.pdf)