component
P1800SC
Public Made by Adomby adom
SURGING Thyristor Surge Suppressors (TSS), DO-214AA. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
P1800SC
SURGING · Thyristor Surge Suppressors (TSS) · DO-214AA
P1800SC from SURGING, in a DO-214AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SURGING |
| Package | DO-214AA |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Off-state Voltage | VDRM | 170 | V | maximum voltage that can be applied while maintaining off state | 3 | ||
| Leakage Current | IDRM | 5 | μA | maximum peak off-state current measured at VDRM | 3 | ||
| Breakover Voltage | VBO | 220 | V | 3 | |||
| Holding Current | IH | 150 | mA | minimum current required to maintain on state | 3 | ||
| Switching Current | IS | 800 | mA | maximum current required to switch to on state | 3 | ||
| On-state Current | IT | 2.2 | A | maximum rated continuous on-state current | 3 | ||
| On-state Voltage | VT | 4 | V | maximum voltage measured at rated on-state current | 3 | ||
| Junction Capacitance | CJ | 35 | 90 | pF | 3 | ||
| Peak Pulse Current 8x20 µs | IPP | 400 | A | 8x20 µs, Series C | 4 | ||
| Peak Pulse Current 2x10 µs | IPP | 500 | A | 2x10 µs, Series C | 4 | ||
| Peak Pulse Current 10x160 µs | IPP | 200 | A | 10x160 µs, Series C | 4 | ||
| Peak Pulse Current 10x560 µs | IPP | 150 | A | 10x560 µs, Series C | 4 | ||
| Peak Pulse Current 10x1000 µs | IPP | 100 | A | 10x1000 µs, Series C | 4 | ||
| Non-repetitive Surge Current | ITSM | 50 | A | 50/60 Hz, Series C | 4 | ||
| Critical Rate of Rise of On-state Current | di/dt | 500 | A/μs | Series C | 4 | ||
| Thermal Resistance Junction to Ambient | RθJA | 90 | °C/W | DO-214AA | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper Alloy | Lead Material Copper Alloy | 5 |
CAD (KiCad official)
- Symbol:
P1800SC - Footprint:
Diode_SMD:D_SMB - 3D model: DO-214AA (KiCad packages3D, STEP)
- 3D model files:
p1800sc-etched.step/p1800sc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p1800sc.step/p1800sc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SURGING datasheet (6 pp, sha256
a4abbce363773e76, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P1800SC
**SURGING** · Thyristor Surge Suppressors (TSS) · DO-214AA
P1800SC from SURGING, in a DO-214AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SURGING |
| Package | DO-214AA |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Off-state Voltage | VDRM | | | 170 | V | maximum voltage that can be applied while maintaining off state | 3 |
| Leakage Current | IDRM | | | 5 | μA | maximum peak off-state current measured at VDRM | 3 |
| Breakover Voltage | VBO | | | 220 | V | | 3 |
| Holding Current | IH | 150 | | | mA | minimum current required to maintain on state | 3 |
| Switching Current | IS | | | 800 | mA | maximum current required to switch to on state | 3 |
| On-state Current | IT | | | 2.2 | A | maximum rated continuous on-state current | 3 |
| On-state Voltage | VT | | | 4 | V | maximum voltage measured at rated on-state current | 3 |
| Junction Capacitance | CJ | 35 | | 90 | pF | | 3 |
| Peak Pulse Current 8x20 µs | IPP | 400 | | | A | 8x20 µs, Series C | 4 |
| Peak Pulse Current 2x10 µs | IPP | 500 | | | A | 2x10 µs, Series C | 4 |
| Peak Pulse Current 10x160 µs | IPP | 200 | | | A | 10x160 µs, Series C | 4 |
| Peak Pulse Current 10x560 µs | IPP | 150 | | | A | 10x560 µs, Series C | 4 |
| Peak Pulse Current 10x1000 µs | IPP | 100 | | | A | 10x1000 µs, Series C | 4 |
| Non-repetitive Surge Current | ITSM | 50 | | | A | 50/60 Hz, Series C | 4 |
| Critical Rate of Rise of On-state Current | di/dt | | | 500 | A/μs | Series C | 4 |
| Thermal Resistance Junction to Ambient | RθJA | | | 90 | °C/W | DO-214AA | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper Alloy | | Lead Material Copper Alloy | 5 |
## CAD (KiCad official)
- Symbol: `P1800SC`
- Footprint: `Diode_SMD:D_SMB`
- 3D model: DO-214AA (KiCad packages3D, STEP)
- 3D model files: `p1800sc-etched.step` / `p1800sc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p1800sc.step` / `p1800sc.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SURGING datasheet](docs/p1800sc-datasheet.pdf) (6 pp, sha256 `a4abbce363773e76`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p1800sc-datasheet.pdf)