Generated by kicad-footprint-generator · KiCad file format 20260206
OR-6N136S-TA1
Orient · Optocouplers - Phototransistor Output · SOP-8
OR-6N136S-TA1 from Orient, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | Anode | passive | LED anode input; average forward input current is rated 25 mA maximum and reverse input voltage 5 V maximum. |
| 3 | Cathode | passive | LED cathode input; average forward input current is rated 25 mA maximum and reverse input voltage 5 V maximum. |
| 4 | NC | unconnected | No connection. |
| 5 | GND | power_in | Ground reference for the output detector side. |
| 6 | Vout | output | Open-collector output with output collector current rated 8 mA maximum and output collector voltage 20 V maximum. |
| 7 | VB | power_in | Photodiode bias connection that can improve speed by reducing collector capacitance of the photo transistor. |
| 8 | VCC | power_in | Output-side supply voltage, rated 30 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Orient |
| Package | SOP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Average Forward Input Current | IF | 25 | mA | 3 | |||
| Reverse Input Voltage | VR | 5 | V | 3 | |||
| Power Dissipation | PI | 45 | mV | 3 | |||
| Output Collector Current | IO | 8 | mA | 3 | |||
| Output Collector Voltage | VO | 20 | V | 3 | |||
| Output Collector Power Dissipation | PO | 100 | mW | 3 | |||
| Supply Voltage | VCC | 30 | V | 3 | |||
| Insulation Voltage | Viso | 5000 | Vrms | 3 | |||
| Working Temperature | Topr | -40 | 110 | ℃ | 3 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering Temperature | Tsol | 260 | ℃ | soldering time 10 seconds | 3 | ||
| Recommended temperature range | TA | 0 | 70 | ℃ | unless otherwise specified, power supply 5V | 5 | |
| Forward Voltage | VF | 1.4 | 1.7 | V | IF= 16mA | 4 | |
| Reverse Voltage | VR | 5 | V | IR = 10μA | 4 | ||
| High Level Output Current | IOH | 0.5 | uA | VCC=5.5V, VO=5.5V, IF=0mA | 4 | ||
| High Level Output Current | IOH | 1 | uA | VCC=15V, VO=15V, IF=0mA | 4 | ||
| Low Level Supply Current | ICCL | 140 | 200 | uA | IF=16mA, Vo=open, VCC=15 V | 4 | |
| High Level Supply Current | ICCH | 0.01 | 1 | uA | IF=0mA,Vo=open, VCC=15V,TA=25℃ | 4 | |
| High Level Supply Current | ICCH | 2 | uA | IF=0mA,Vo=open, VCC=15V | 4 | ||
| Current Transfer Ratio | CTR | 19 | 50 | % | IF = 16mA , VO = 0.4V, VCC=4.5V, TA=25°C | 4 | |
| Current Transfer Ratio | CTR | 15 | % | IF = 16mA , VO = 0.5V, VCC=4.5V | 4 | ||
| Logic Low Output Voltage | VOL | 0.25 | 0.4 | V | IF = 16mA ,IO = 3mA, VCC=4.5V, TA=25°C | 4 | |
| Logic Low Output Voltage | VOL | 0.5 | V | IF= 16mA ,IO=2.4mA, VCC=4.5V | 4 | ||
| Propagation delay time to output Low level | tPHL | 0.1 | 0.8 | us | RL=1.9kΩ IF=16mA | 5 | |
| Propagation delay time to output High level | tPLH | 0.4 | 0.8 | us | RL=1.9kΩ IF=16mA | 5 | |
| Input-Output Insulation Leakage Current | II-O | 1 | μA | 45% RH,t=5s,VI-O=3kV DC,TA =25 C | 6 | ||
| Withstand Insulation Test Voltage | VISO | 5000 | VRMS | RH ≤ 50%, t =1min, TA=25℃ | 6 |
CAD (KiCad official)
- Symbol:
OR-6N136S-TA1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
or-6n136s-ta1-etched.step/or-6n136s-ta1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);or-6n136s-ta1.step/or-6n136s-ta1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Orient datasheet (17 pp, sha256
08aa5cbf93789a24, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).