main
Ray
opt3101rhfr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
7d572dc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324
{
"schema_version": 1,
"type": "component",
"slug": "opt3101rhfr",
"title": "OPT3101RHFR",
"brief": "Texas Instruments Position Sensor, QFN-28-EP(4x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensor",
"opt3101rhfr"
],
"component": {
"mpn": "OPT3101RHFR",
"manufacturer": "Texas Instruments",
"package": "QFN-28-EP(4x5)",
"pin_count": 29,
"category": "Sensor",
"subcategory": "Position Sensor",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220000_Texas-Instruments-OPT3101RHFR_C2867533.pdf",
"parts": {
"symbol": "opt3101rhfr.kicad_sym",
"footprint": "opt3101rhfr.kicad_mod",
"model_3d": "opt3101rhfr-etched.glb",
"model_3d_plain": "opt3101rhfr.glb",
"model_3d_step": "opt3101rhfr-etched.step",
"model_3d_step_plain": "opt3101rhfr.step",
"lbr": "opt3101rhfr.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "A1",
"type": "input",
"description": "I2C slave address bit LSB1. Selects the lower address bits of the device. Referenced to AVDD I/O domain."
},
{
"number": "2",
"name": "A2",
"type": "input",
"description": "I2C slave address bit LSB2. Selects the lower address bits of the device. Referenced to AVDD I/O domain."
},
{
"number": "3",
"name": "IOVSS",
"type": "power_in",
"description": "Ground return for the digital and I/O supply (IOVDD)."
},
{
"number": "4",
"name": "TX2",
"type": "output",
"description": "Illumination driver output (channel 2). Connects to the cathode of the emitter LED/laser diode; the anode connects to the supply. Programmable current up to 173.6 mA; VDRV range 0.7 V to 3.6 V."
},
{
"number": "5",
"name": "TX1",
"type": "output",
"description": "Illumination driver output (channel 1). Connects to the cathode of the emitter LED/laser diode; anode to supply. Programmable current up to 173.6 mA."
},
{
"number": "6",
"name": "VSSL",
"type": "power_in",
"description": "Illumination driver ground. Dedicated low-inductance return for the TX0/TX1/TX2 emitter current."
},
{
"number": "7",
"name": "TX0",
"type": "output",
"description": "Illumination driver output (channel 0). Connects to the cathode of the emitter LED/laser diode; anode to supply. Programmable current up to 173.6 mA."
},
{
"number": "8",
"name": "IOVSS",
"type": "power_in",
"description": "Ground return for the digital and I/O supply (IOVDD)."
},
{
"number": "9",
"name": "IOVDD",
"type": "power_in",
"description": "1.7 V to 3.6 V supply for the digital I/O and internal illumination driver logic. Bypass to IOVSS."
},
{
"number": "10",
"name": "IOVDD",
"type": "power_in",
"description": "1.7 V to 3.6 V supply for the digital I/O and internal illumination driver logic. Bypass to IOVSS."
},
{
"number": "11",
"name": "GP1",
"type": "output",
"description": "General-purpose output. IOVDD I/O domain."
},
{
"number": "12",
"name": "GP2",
"type": "bidirectional",
"description": "General-purpose I/O; can also be configured as CLKREF input for the modulation clock. IOVDD I/O domain."
},
{
"number": "13",
"name": "SCL_S",
"type": "input",
"description": "I2C slave clock. Requires a 10 kΩ pull-up to 3.3 V. IOVDD I/O domain."
},
{
"number": "14",
"name": "SDA_S",
"type": "bidirectional",
"description": "I2C slave data (open-drain). Requires a 10 kΩ pull-up to 3.3 V. IOVDD I/O domain."
},
{
"number": "15",
"name": "SCL_M",
"type": "output",
"description": "I2C master clock (for optional external temperature sensor / peripheral). Requires a 10 kΩ pull-up to 3.3 V."
},
{
"number": "16",
"name": "SDA_M",
"type": "bidirectional",
"description": "I2C master data (open-drain). Requires a 10 kΩ pull-up to 3.3 V."
},
{
"number": "17",
"name": "RST_MS",
"type": "input",
"description": "Active-low, monostable-triggered global reset. No internal pull-up; must be driven by host or externally pulled up. IOVDD I/O domain."
},
{
"number": "18",
"name": "REG_MODE",
"type": "input",
"description": "Selects the mode of the internal 1.8 V LDO regulator that produces AVDD and DVDD from AVDD3. IOVDD I/O domain."
},
{
"number": "19",
"name": "DVDD",
"type": "power_in",
"description": "1.8 V digital core supply (nominal 1.8 V, range 1.7-1.9 V). Can be supplied externally or by the internal LDO from AVDD3."
},
{
"number": "20",
"name": "AVDD3",
"type": "power_in",
"description": "3.3 V analog supply (range 3.0-3.6 V). Also feeds the internal LDO when the on-chip 1.8 V regulator is enabled."
},
{
"number": "21",
"name": "AVDD",
"type": "power_in",
"description": "1.8 V analog supply (range 1.7-1.9 V). Can be supplied externally or by the internal LDO from AVDD3."
},
{
"number": "22",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. May be left floating or tied to ground."
},
{
"number": "23",
"name": "AVSS",
"type": "power_in",
"description": "Analog ground return."
},
{
"number": "24",
"name": "INM",
"type": "input",
"description": "AFE negative input. Connect the photodiode-equivalent bypass capacitor here; the other end of the capacitor returns to AVSS. Bias voltage VR ≈ 1 V."
},
{
"number": "25",
"name": "INP",
"type": "input",
"description": "AFE positive input. Connect the anode of the photodiode here (cathode to AVSS). Bias voltage VR ≈ 1 V; max input photodiode capacitance 6 pF."
},
{
"number": "26",
"name": "AVSS",
"type": "power_in",
"description": "Analog ground return."
},
{
"number": "27",
"name": "AVSS",
"type": "power_in",
"description": "Analog ground return."
},
{
"number": "28",
"name": "A0",
"type": "input",
"description": "I2C slave address bit LSB0. Selects the lower address bits of the device. Referenced to AVDD I/O domain."
},
{
"number": "PAD",
"name": "Thermal Pad",
"type": "power_in",
"description": "Exposed thermal pad on the package bottom. Connect through multiple vias to the AVSS PCB ground plane for proper thermal performance and electrical grounding."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220000_Texas-Instruments-OPT3101RHFR_C2867533.pdf",
"pages": 116,
"sha256": "d2e248f208968588",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "opt3101rhfr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "028686d522379f70cdcac54d7cbc05f7e8d72fe41515288068d2e2da8d27bc8d",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "opt3101rhfr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f9ddcf70c169015e592ad5f98b6e13265b1d0a681389372779e4af96cb5f2ef0",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "QFN-28-EP(4x5)",
"Category": "Sensor",
"Pins": "29"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"opt3101rhfr"
],
"discovery_pitch": "OPT3101RHFR (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"opt3101rhfr.kicad_sym",
"opt3101rhfr.kicad_mod",
"opt3101rhfr.glb",
"opt3101rhfr.step",
"opt3101rhfr-etched.step",
"opt3101rhfr.lbr",
"docs/hero.png",
"docs/opt3101rhfr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "OPT3101RHFR",
"kind": "packaging"
},
{
"mpn": "OPT3101RHFRRHFT",
"kind": "packaging"
}
],
"updated_at": "2026-09-25T04:01:33.613Z"
}