main
Ray Publish 0.1.2 63b1100
{
  "slug": "opt3001idnprq1",
  "version": "0.1.2",
  "type": "component",
  "description": "Texas Instruments Ambient Light Sensors, WSON-6-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensor",
    "opt3001idnprq1"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opt3001idnprq1.kicad_sym",
    "opt3001idnprq1.kicad_mod",
    "opt3001idnprq1.glb",
    "opt3001idnprq1.step",
    "opt3001idnprq1.lbr",
    "docs/hero.png",
    "docs/opt3001idnprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "opt3001idnprq1-etched.step",
    "opt3001idnprq1-etched.glb"
  ],
  "component": {
    "mpn": "OPT3001IDNPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "Ambient Light Sensors",
    "parts": {
      "symbol": "opt3001idnprq1.kicad_sym",
      "footprint": "opt3001idnprq1.kicad_mod",
      "model_3d": "opt3001idnprq1-etched.glb",
      "model_3d_plain": "opt3001idnprq1.glb",
      "model_3d_step": "opt3001idnprq1-etched.step",
      "model_3d_step_plain": "opt3001idnprq1.step",
      "lbr": "opt3001idnprq1.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Device power supply. Connect to a 1.6 V to 3.6 V rail. Bypass locally with a decoupling capacitor."
      },
      {
        "number": "2",
        "name": "ADDR",
        "type": "input",
        "description": "I2C address select. Tie to GND, VDD, SDA, or SCL to program the two LSBs of the 7-bit I2C slave address (allowing up to four devices on one bus)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device. Also serves as the electrical connection point for the exposed thermal/mechanical pad on the package underside."
      },
      {
        "number": "4",
        "name": "SCL",
        "type": "input",
        "description": "I2C/SMBus serial clock input. Open-drain bus line; pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."
      },
      {
        "number": "5",
        "name": "INT",
        "type": "output",
        "description": "Interrupt/alert output, open-drain, active-low. Asserts on programmable high/low light thresholds or on end-of-conversion. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."
      },
      {
        "number": "6",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C/SMBus serial data line, open-drain. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."
      },
      {
        "number": "7",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed thermal/mechanical pad on the package underside. TI recommends electrically connecting the pad to ground (via a PCB trace or vias directly on the pad)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2861428",
      "digikey": "296-47670-2-ND",
      "mouser": "595-OPT3001IDNPRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:13:23Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "296-47670-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-OPT3001IDNPRQ1",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "opt3001idnprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "opt3001idnprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6efd3d2aac0d620e6423ff9a8303e0090737a9d804809734de1bfa23d192149b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}