main
Ray
opt3001idnprq1: English datasheet SBOS853C (was the translation ZHCSG67A)
a44cc3d
OPT3001IDNPRQ1
Texas Instruments · Ambient Light Sensors · WSON-6-EP(2x2)
OPT3001IDNPRQ1 from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Device power supply. Connect to a 1.6 V to 3.6 V rail. Bypass locally with a decoupling capacitor. |
| 2 | ADDR | input | I2C address select. Tie to GND, VDD, SDA, or SCL to program the two LSBs of the 7-bit I2C slave address (allowing up to four devices on one bus). |
| 3 | GND | power_in | Ground reference for the device. Also serves as the electrical connection point for the exposed thermal/mechanical pad on the package underside. |
| 4 | SCL | input | I2C/SMBus serial clock input. Open-drain bus line; pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 5 | INT | output | Interrupt/alert output, open-drain, active-low. Asserts on programmable high/low light thresholds or on end-of-conversion. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 6 | SDA | bidirectional | I2C/SMBus serial data line, open-drain. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 7 | PAD | passive | Exposed thermal/mechanical pad on the package underside. TI recommends electrically connecting the pad to ground (via a PCB trace or vias directly on the pad). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Sensor |
| Pins | 7 |
Ordering variants
OPT3001IDNPRQ1OPT3001IDNPRQ1IDNPTQ1
CAD (KiCad official)
- Symbol:
OPT3001IDNPRQ1 - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
opt3001idnprq1-etched.step/opt3001idnprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opt3001idnprq1.step/opt3001idnprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
d5d667bb97c4fb44, retrieved 2026-11-21, tier: mfr) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPT3001IDNPRQ1
**Texas Instruments** · Ambient Light Sensors · WSON-6-EP(2x2)
OPT3001IDNPRQ1 from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Device power supply. Connect to a 1.6 V to 3.6 V rail. Bypass locally with a decoupling capacitor. |
| 2 | ADDR | input | I2C address select. Tie to GND, VDD, SDA, or SCL to program the two LSBs of the 7-bit I2C slave address (allowing up to four devices on one bus). |
| 3 | GND | power_in | Ground reference for the device. Also serves as the electrical connection point for the exposed thermal/mechanical pad on the package underside. |
| 4 | SCL | input | I2C/SMBus serial clock input. Open-drain bus line; pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 5 | INT | output | Interrupt/alert output, open-drain, active-low. Asserts on programmable high/low light thresholds or on end-of-conversion. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 6 | SDA | bidirectional | I2C/SMBus serial data line, open-drain. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant. |
| 7 | PAD | passive | Exposed thermal/mechanical pad on the package underside. TI recommends electrically connecting the pad to ground (via a PCB trace or vias directly on the pad). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Sensor |
| Pins | 7 |
## Ordering variants
- `OPT3001IDNPRQ1`
- `OPT3001IDNPRQ1IDNPTQ1`
## CAD (KiCad official)
- Symbol: `OPT3001IDNPRQ1`
- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`
- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `opt3001idnprq1-etched.step` / `opt3001idnprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opt3001idnprq1.step` / `opt3001idnprq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](docs/opt3001idnprq1-datasheet.pdf) (45 pp, sha256 `d5d667bb97c4fb44`, retrieved 2026-11-21, tier: mfr)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opt3001idnprq1-datasheet.pdf)