main
Ray
opa991sidbvr: specified limits as data (metadata.characteristics, 25 rows from the datasheet)
ccf7d46
OPA991SIDBVR
Texas Instruments · Operational Amplifier · SOT-23-6
OPA991SIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail; can source/sink up to ±75 mA and drive up to 1 nF capacitive loads while maintaining stability. |
| 2 | V- | power_in | Negative (lowest) supply rail. Connect to ground for single-supply operation, or to the negative rail for split-supply operation. Total supply range 2.7 V to 40 V (V+ minus V-). |
| 3 | IN+ | input | Non-inverting input. Rail-to-rail common-mode input range extending 100 mV beyond both supply rails. Input bias current typically ±10 pA. |
| 4 | IN- | input | Inverting input. Rail-to-rail common-mode input range extending 100 mV beyond both supply rails. Input bias current typically ±10 pA. |
| 5 | SHDN | input | Active-high shutdown control. Logic low (< V- + 0.2 V) enables the amplifier; logic high (> V- + 1.1 V) disables the amplifier and drops supply current to ~30 µA. See section 7.3.11 for details. |
| 6 | V+ | power_in | Positive (highest) supply rail. Total supply range 2.7 V to 40 V (V+ minus V-). Bypass with 100 nF ceramic to V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Op-amp/Cmp |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
OPA991SIDBVROPA991SIDBVTOPA991SIDBVRIDCKROPA991SIDBVRIDCKT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS = V+ − V−) | VS | 2.7 | 40 | V | Stated test range in electrical characteristics header: VS = 2.7 V to 40 V (±1.35 V to ±20 V) | 11 | |
| Rated operating temperature range | TA | -40 | 125 | °C | Rated operating temperature range stated in product overview | 1 | |
| Input offset voltage | VOS | -750 | 125 | 750 | µV | VCM = V– | 11 |
| Input offset voltage over temperature | VOS | -780 | 780 | µV | TA = –40°C to 125°C | 11 | |
| Input offset voltage vs supply (PSRR) | PSRR | -1 | 0.3 | 1 | µV/V | VCM = V–, VS = 4 V to 40 V, TA = –40°C to 125°C | 11 |
| Input offset voltage vs supply (PSRR) | PSRR | -5 | 1 | 5 | µV/V | VCM = V–, VS = 2.7 V to 40 V (footnote 2: characterization only) | 11 |
| Common-mode rejection ratio | CMRR | 109 | 130 | dB | VS = 40 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair), TA = –40°C to 125°C | 11 | |
| Common-mode rejection ratio | CMRR | 84 | 100 | dB | VS = 4 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair) | 11 | |
| Common-mode rejection ratio | CMRR | 75 | 95 | dB | VS = 2.7 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair) (footnote 2: characterization only) | 11 | |
| Open-loop voltage gain | AOL | 120 | 145 | dB | VS = 40 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V | 12 | |
| Open-loop voltage gain | AOL | 142 | dB | TA = –40°C to 125°C | 12 | ||
| Open-loop voltage gain | AOL | 104 | 130 | dB | VS = 4 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V | 12 | |
| Open-loop voltage gain | AOL | 125 | dB | TA = –40°C to 125°C | 12 | ||
| Open-loop voltage gain | AOL | 101 | 120 | dB | VS = 2.7 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V (footnote 2: characterization only) | 12 | |
| Open-loop voltage gain | AOL | 118 | dB | TA = –40°C to 125°C | 12 | ||
| Output voltage swing from supply rail | 5 | 10 | mV | VS = 40 V, RL = no load (footnote 2) | 12 | ||
| Output voltage swing from supply rail | 50 | 55 | mV | VS = 40 V, RL = 10 kΩ | 12 | ||
| Output voltage swing from supply rail | 200 | 250 | mV | VS = 40 V, RL = 2 kΩ | 12 | ||
| Output voltage swing from supply rail | 1 | 6 | mV | VS = 2.7 V, RL = no load (footnote 2) | 12 | ||
| Output voltage swing from supply rail | 5 | 12 | mV | VS = 2.7 V, RL = 10 kΩ | 12 | ||
| Output voltage swing from supply rail | 25 | 40 | mV | VS = 2.7 V, RL = 2 kΩ | 12 | ||
| Short-circuit current | ISC | -75 | 75 | mA | 12 | ||
| Quiescent current per amplifier | IQ | 560 | 685 | µA | VCM = V–, IO = 0 A | 13 | |
| Quiescent current per amplifier over temperature | IQ | 750 | µA | TA = –40°C to 125°C | 13 | ||
| Quiescent current per amplifier, shutdown | IQSD | 30 | 45 | µA | VS = 2.7 V to 40 V, all amplifiers disabled, SHDN = V– + 2 V | 13 |
CAD (KiCad official)
- Symbol:
OPA991SIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (77 pp, sha256
66cd6ff5fa13e39d, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA991SIDBVR
**Texas Instruments** · Operational Amplifier · SOT-23-6
OPA991SIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail; can source/sink up to ±75 mA and drive up to 1 nF capacitive loads while maintaining stability. |
| 2 | V- | power_in | Negative (lowest) supply rail. Connect to ground for single-supply operation, or to the negative rail for split-supply operation. Total supply range 2.7 V to 40 V (V+ minus V-). |
| 3 | IN+ | input | Non-inverting input. Rail-to-rail common-mode input range extending 100 mV beyond both supply rails. Input bias current typically ±10 pA. |
| 4 | IN- | input | Inverting input. Rail-to-rail common-mode input range extending 100 mV beyond both supply rails. Input bias current typically ±10 pA. |
| 5 | SHDN | input | Active-high shutdown control. Logic low (< V- + 0.2 V) enables the amplifier; logic high (> V- + 1.1 V) disables the amplifier and drops supply current to ~30 µA. See section 7.3.11 for details. |
| 6 | V+ | power_in | Positive (highest) supply rail. Total supply range 2.7 V to 40 V (V+ minus V-). Bypass with 100 nF ceramic to V-. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Op-amp/Cmp |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `OPA991SIDBVR`
- `OPA991SIDBVT`
- `OPA991SIDBVRIDCKR`
- `OPA991SIDBVRIDCKT`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS = V+ − V−) | VS | 2.7 | | 40 | V | Stated test range in electrical characteristics header: VS = 2.7 V to 40 V (±1.35 V to ±20 V) | 11 |
| Rated operating temperature range | TA | -40 | | 125 | °C | Rated operating temperature range stated in product overview | 1 |
| Input offset voltage | VOS | -750 | 125 | 750 | µV | VCM = V– | 11 |
| Input offset voltage over temperature | VOS | -780 | | 780 | µV | TA = –40°C to 125°C | 11 |
| Input offset voltage vs supply (PSRR) | PSRR | -1 | 0.3 | 1 | µV/V | VCM = V–, VS = 4 V to 40 V, TA = –40°C to 125°C | 11 |
| Input offset voltage vs supply (PSRR) | PSRR | -5 | 1 | 5 | µV/V | VCM = V–, VS = 2.7 V to 40 V (footnote 2: characterization only) | 11 |
| Common-mode rejection ratio | CMRR | 109 | 130 | | dB | VS = 40 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair), TA = –40°C to 125°C | 11 |
| Common-mode rejection ratio | CMRR | 84 | 100 | | dB | VS = 4 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair) | 11 |
| Common-mode rejection ratio | CMRR | 75 | 95 | | dB | VS = 2.7 V, (V–) – 0.1 V < VCM < (V+) – 2 V (main input pair) (footnote 2: characterization only) | 11 |
| Open-loop voltage gain | AOL | 120 | 145 | | dB | VS = 40 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V | 12 |
| Open-loop voltage gain | AOL | 142 | | | dB | TA = –40°C to 125°C | 12 |
| Open-loop voltage gain | AOL | 104 | 130 | | dB | VS = 4 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V | 12 |
| Open-loop voltage gain | AOL | 125 | | | dB | TA = –40°C to 125°C | 12 |
| Open-loop voltage gain | AOL | 101 | 120 | | dB | VS = 2.7 V, VCM = V–, (V–) + 0.1 V < VO < (V+) – 0.1 V (footnote 2: characterization only) | 12 |
| Open-loop voltage gain | AOL | 118 | | | dB | TA = –40°C to 125°C | 12 |
| Output voltage swing from supply rail | | | 5 | 10 | mV | VS = 40 V, RL = no load (footnote 2) | 12 |
| Output voltage swing from supply rail | | | 50 | 55 | mV | VS = 40 V, RL = 10 kΩ | 12 |
| Output voltage swing from supply rail | | | 200 | 250 | mV | VS = 40 V, RL = 2 kΩ | 12 |
| Output voltage swing from supply rail | | | 1 | 6 | mV | VS = 2.7 V, RL = no load (footnote 2) | 12 |
| Output voltage swing from supply rail | | | 5 | 12 | mV | VS = 2.7 V, RL = 10 kΩ | 12 |
| Output voltage swing from supply rail | | | 25 | 40 | mV | VS = 2.7 V, RL = 2 kΩ | 12 |
| Short-circuit current | ISC | -75 | | 75 | mA | | 12 |
| Quiescent current per amplifier | IQ | | 560 | 685 | µA | VCM = V–, IO = 0 A | 13 |
| Quiescent current per amplifier over temperature | IQ | | | 750 | µA | TA = –40°C to 125°C | 13 |
| Quiescent current per amplifier, shutdown | IQSD | | 30 | 45 | µA | VS = 2.7 V to 40 V, all amplifiers disabled, SHDN = V– + 2 V | 13 |
## CAD (KiCad official)
- Symbol: `OPA991SIDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](docs/opa991sidbvr-datasheet.pdf) (77 pp, sha256 `66cd6ff5fa13e39d`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa991sidbvr-datasheet.pdf)