component

OPA890IDBVR

Public Made by Adom

by adom

Texas Instruments Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoperational amplifier-comparatoropa890idbvrfactory-2.0.0extractor-text

Changed since verified OPA890IDBVR

by Ray · last 2 Nov 2026 · 1 record · files changed since
SymbolFootprint3D modelPins

Verification log 1 record

2 Nov 2026RayPublished by the parts factory: tier mfr, 6 pinschanged since
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: OPA890IDBVR · SOT-23-6 · 6 pins
  • ✓copper: 6 copper pads, none touching another net
  • ✓datasheet: all 6 pin names found in the 37-page datasheet
  • ✓distributor: lcsc C2057760, digikey 296-46173-2-ND, mouser 595-OPA890IDBVR
  • ✓family: SOT-23-6
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-shoepglc/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 6 pins = 6 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 6 pins agree
  • ✓visibility: public, source open
Evidencedatasheet
Verified files! opa890idbvr.kicad_sym✓ opa890idbvr.kicad_mod✓ opa890idbvr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
opa890idbvr / README.md
History Download
Ray Publish 0.1.0 16d6776 4d ago

OPA890IDBVR

Texas Instruments · Operational Amplifier · SOT-23-6

OPA890IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Amplifier output, which goes high-impedance when DIS is pulled LOW; output swing is ±4.0V typical with no load on ±5V supplies.
2 -VS power_in Negative supply, with dual supplies of ±1.5V to ±6V (absolute maximum power supply ±6.5V) or ground for single-supply operation.
3 Noninverting Input input Noninverting input of the voltage-feedback op amp, with common-mode input range of ±3.9V typical on ±5V supplies.
4 Inverting Input input Inverting input of the voltage-feedback op amp, used with feedback resistor RF to set gain.
5 DIS input Disable control: left open or held HIGH the amplifier operates normally, pulled LOW supply current drops to less than 30μA and the output goes high-impedance.
6 +VS power_in Positive supply, +3V to +12V single supply or ±1.5V to ±6V dual supplies (absolute maximum power supply ±6.5V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Gain Bandwidth Product 130 MHz G > +20V/V, VS=±5V 3
Small-Signal Bandwidth 115 MHz G = +2V/V, VO = 100mVPP, VS=±5V 3
Small-Signal Bandwidth 13 MHz G = +10V/V, VO = 100mVPP, VS=±5V 3
Slew Rate 500 V/μs G = +2V/V, VO = 2V Step, VS=±5V 3
2nd-Harmonic Distortion -88 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω, VS=±5V 3
2nd-Harmonic Distortion -102 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω, VS=±5V 3
3rd-Harmonic Distortion -89 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω, VS=±5V 3
3rd-Harmonic Distortion -94 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω, VS=±5V 3
Input Voltage Noise 8 nV/√Hz f > 100kHz, VS=±5V 3
Input Current Noise 1 pA/√Hz f > 100kHz, VS=±5V 3
Open-Loop Voltage Gain (AOL) AOL 62 dB VO = 0V, RL = 100Ω, VS=±5V 3
Input Offset Voltage 1 5 mV VCM = 0V, VS=±5V 3
Average Offset Voltage Drift 15 μV/°C VCM = 0V, VS=±5V 3
Input Bias Current 0.1 1.6 μA VCM = 0V, VS=±5V 3
Input Offset Current 70 350 nA VCM = 0V, VS=±5V 3
Common-Mode Input Range (CMIR) 3.9 V VS=±5V 3
Common-Mode Rejection Ratio (CMRR) 67 dB VCM = 0V, Input-Referred, VS=±5V 3
Output Voltage Swing 4 V No Load, VS=±5V 3
Output Voltage Swing 3.5 V RL = 100Ω, VS=±5V 3
Output Current, Sourcing, Sinking 40 mA VO = 0V, VS=±5V 3
Power-Down Supply Current (+VS) 30 55 μA VDIS = 0, VS=±5V 4
Enable Voltage 3 V VS=±5V 4
Disable Voltage 1.4 V VS=±5V 4
Control Pin Input Bias Current (VDIS) VDIS 15 30 μA VDIS = 0V, Each Channel, VS=±5V 4
Maximum Operating Voltage 6 V VS=±5V 4
Maximum Quiescent Current 1.1 1.2 mA VS = ±5V 4
Minimum Quiescent Current 1.05 1.1 mA VS = ±5V 4
Power-Supply Rejection Ratio (+PSRR) +PSRR 74 dB +VS = 4.5V to 5.5V, VS=±5V 4
Gain Bandwidth Product 125 MHz G > +20V/V, VS=+5V 5
Small-Signal Bandwidth 105 MHz G = +2V/V, VO = 100mVPP, VS=+5V 5
Small-Signal Bandwidth 12 MHz G = +10V/V, VO = 100mVPP, VS=+5V 5
Slew Rate 350 V/μs G = +2V/V, VO = 2V Step, VS=+5V 5
2nd-Harmonic Distortion -85 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω, VS=+5V 5
2nd-Harmonic Distortion -90 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω, VS=+5V 5
3rd-Harmonic Distortion -85 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω, VS=+5V 5
3rd-Harmonic Distortion -87 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω, VS=+5V 5
Input Voltage Noise 8.1 nV/√Hz f > 100kHz, VS=+5V 5
Input Current Noise 1.1 pA/√Hz f > 100kHz, VS=+5V 5
Open-Loop Voltage Gain (AOL) AOL 60 dB VO = VS/2, RL = 100Ω, VS=+5V 5
Input Offset Voltage 1 5 mV VCM = VS/2, VS=+5V 5
Average Offset Voltage Drift 15 μV/°C VCM = VS/2, VS=+5V 5
Input Bias Current 0.1 1.7 μA VCM = VS/2, VS=+5V 5
Input Offset Current 70 400 nA VCM = VS/2, VS=+5V 5
Most Positive Input Voltage 4 V VS=+5V 5
Least Positive Input Voltage 1 V VS=+5V 5
Common-Mode Rejection Ratio (CMRR) 65 dB VCM = VS/2, Input-Referred, VS=+5V 5
Most Positive Output Voltage 4 V No Load, VS=+5V 5
Most Positive Output Voltage 3.9 V RL = 100Ω, VS=+5V 5
Least Positive Output Voltage 1 V No Load, VS=+5V 5
Least Positive Output Voltage 1.1 V RL = 100Ω, VS=+5V 5
Output Current: Sourcing, Sinking 35 mA VO = VS/2, VS=+5V 5
Power-Down Supply Current (+VS) 18 45 μA VDIS = 0V, both channels, VS=+5V 6
Maximum Operating Voltage 12 V VS=+5V 6
Maximum Quiescent Current 1.06 1.18 mA VS = +5V 6
Minimum Quiescent Current 0.92 1.06 mA VS = +5V 6
Supply Voltage (Maximum) 6.5 V Power Supply, ±VS 2
Storage Temperature Range -65 125 °C 2
Maximum Junction Temperature TJ 150 °C 2
ESD Rating: Human Body Model (HBM) 2000 V Human Body Model (HBM) 2
Thermal Resistance, Junction-to-Ambient (DBV SOT23-6) θJA 110 °C/W 4

CAD (KiCad official)

  • Symbol: OPA890IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: opa890idbvr-etched.step / opa890idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa890idbvr.step / opa890idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 ef4f8e08ee4ab001, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF