← Commit history

Initial commit: component/opa859idsgr

Ray ·472347aba9 ·
2 files changed +208
README.mdadded+46
@@ -0,0 +1,46 @@+# OPA859IDSGR++**Texas Instruments** · Operational Amplifier · WSON-8-EP(2x2)++OPA859IDSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB | input | Feedback input; provides direct connection to amplifier output for transimpedance amplifier feedback network configuration. |+| 2 | NC | unconnected | No connection; must remain floating to provide isolation between FB and IN- pins and reduce capacitive coupling. |+| 3 | IN- | input | Inverting input with differential input impedance of 1 GΩ and differential input capacitance of 0.2 pF. |+| 4 | IN+ | input | Non-inverting input with common-mode input impedance of 1 GΩ, common-mode capacitance of 0.62 pF, and common-mode range 0 V to (VS+ - 1.4 V). |+| 5 | VS- | power_in | Negative power supply rail referenced to ground for split-supply or ground for single-supply operation; absolute maximum voltage range 0 V to (VS+ - 5.5 V). |+| 6 | OUT | output | Amplifier output with output voltage high 3.95 V to 4.1 V and low 1.1 V to 1.15 V at VS+ = 5 V, RL = 200Ω; output swing limited to approximately 3 V. |+| 7 | VS+ | power_in | Positive power supply rail; recommended operating voltage range 3.3 V to 5.25 V; total supply voltage (VS+ - VS-) must be 3.3 V to 5.25 V. |+| 8 | PD | input | Power-down input; logic low (< 0.65 V referenced to VS-) disables amplifier and reduces quiescent current to 70 µA to 140 µA; logic high (> 1.5 V) enables normal operation. |+| 9 | Thermal Pad | power_in | Exposed thermal pad; must be soldered to printed circuit board and connected to VS- for proper thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-8-EP(2x2) |+| Category | Amplifiers/Comparators |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `OPA859IDSGR`+- Footprint: `Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm`+- 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `opa859idsgr-etched.step` / `opa859idsgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa859idsgr.step` / `opa859idsgr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa859) (36 pp, sha256 `6ddd0c0d8169ba63`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opa859idsgr-datasheet.pdf)
page.jsonadded+162
@@ -0,0 +1,162 @@+{+  "slug": "opa859idsgr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Operational Amplifier, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "opa859idsgr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "opa859idsgr.kicad_sym",+    "opa859idsgr.kicad_mod",+    "opa859idsgr.glb",+    "opa859idsgr.step",+    "opa859idsgr.lbr",+    "docs/hero.png",+    "docs/opa859idsgr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "OPA859IDSGR",+    "manufacturer": "Texas Instruments",+    "package": "WSON-8-EP(2x2)",+    "pin_count": 9,+    "category": "Amplifiers/Comparators",+    "subcategory": "Operational Amplifier",+    "datasheet": "https://www.ti.com/cn/lit/gpn/opa859",+    "parts": {+      "symbol": "opa859idsgr.kicad_sym",+      "footprint": "opa859idsgr.kicad_mod",+      "model_3d": "opa859idsgr-etched.glb",+      "model_3d_plain": "opa859idsgr.glb",+      "model_3d_step": "opa859idsgr-etched.step",+      "model_3d_step_plain": "opa859idsgr.step",+      "lbr": "opa859idsgr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2058582",+      "digikey": "296-51513-2-ND",+      "mouser": "595-OPA859IDSGR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T05:33:31Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-51513-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-OPA859IDSGR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "FB",+        "type": "input",+        "description": "Feedback input; provides direct connection to amplifier output for transimpedance amplifier feedback network configuration."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; must remain floating to provide isolation between FB and IN- pins and reduce capacitive coupling."+      },+      {+        "number": "3",+        "name": "IN–",+        "type": "input",+        "description": "Inverting input with differential input impedance of 1 GΩ and differential input capacitance of 0.2 pF."+      },+      {+        "number": "4",+        "name": "IN+",+        "type": "input",+        "description": "Non-inverting input with common-mode input impedance of 1 GΩ, common-mode capacitance of 0.62 pF, and common-mode range 0 V to (VS+ - 1.4 V)."+      },+      {+        "number": "5",+        "name": "VS–",+        "type": "power_in",+        "description": "Negative power supply rail referenced to ground for split-supply or ground for single-supply operation; absolute maximum voltage range 0 V to (VS+ - 5.5 V)."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Amplifier output with output voltage high 3.95 V to 4.1 V and low 1.1 V to 1.15 V at VS+ = 5 V, RL = 200Ω; output swing limited to approximately 3 V."+      },+      {+        "number": "7",+        "name": "VS+",+        "type": "power_in",+        "description": "Positive power supply rail; recommended operating voltage range 3.3 V to 5.25 V; total supply voltage (VS+ - VS-) must be 3.3 V to 5.25 V."+      },+      {+        "number": "8",+        "name": "PD",+        "type": "input",+        "description": "Power-down input; logic low (< 0.65 V referenced to VS-) disables amplifier and reduces quiescent current to 70 µA to 140 µA; logic high (> 1.5 V) enables normal operation."+      },+      {+        "number": "9",+        "name": "Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal pad; must be soldered to printed circuit board and connected to VS- for proper thermal and mechanical performance."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 36,+        "cost_usd": 0.4913,+        "at": "2026-09-27T05:33:15"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/opa859",+        "pages": 36,+        "sha256": "6ddd0c0d8169ba63",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file