Generated by kicad-footprint-generator · KiCad file format 20260206
OPA857IRGTT
Texas Instruments · Operational Amplifier · VQFN-16-EP(3x3)
OPA857IRGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 2 | CTRL | input | Transimpedance gain control: logic 0 (GND) selects 5-kΩ internal resistance, logic 1 (+VS) selects 20-kΩ internal resistance. |
| 3 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 4 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 5 | OUTN | output | Common-mode voltage output reference, set to 5/9 of the supply (1.83 V at 3.3 V) through a 25-Ω internal series resistor. |
| 6 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 7 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 8 | OUT | output | Signal output with a 25-Ω internal series resistor that limits the load during short-circuit; the negative swing cannot go closer than 0.6 V to the rail. |
| 9 | +VS | power_in | Supply voltage pin; recommended supply range is 2.7 V to 3.6 V (3.3 V nominal). |
| 10 | +VS | power_in | Supply voltage pin; recommended supply range is 2.7 V to 3.6 V (3.3 V nominal). |
| 11 | +VS | power_in | Supply voltage pin; recommended supply range is 2.7 V to 3.6 V (3.3 V nominal). |
| 12 | GND | power_in | Ground pin; one of six GND pins (1, 3, 4, 6, 7, 12) on the RGT package. |
| 13 | Test_SD | input | Test mode enable: connect to GND for normal operation and to +VS to enable test mode. |
| 14 | Test_IN | input | Test mode input; connect to +VS during normal operation. |
| 15 | IN | input | Transimpedance input for the photodiode; absolute maximum input current on the VIN pins is 10 mA. |
| 16 | NC | unconnected | Not connected. |
| 17 | Thermal pad | passive | Exposed thermal pad, numbered 17 on the package drawing; it must be soldered to the printed circuit board for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Operational Amplifier/Comparator |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VS- to VS+ | 3.8 | V | 5 | ||||
| Differential input voltage | 1 | V | 5 | ||||
| Output current | 50 | mA | 5 | ||||
| Input current, VIN pin | 10 | mA | 5 | ||||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Maximum junction temperature (continuous operation, long-term reliability) | TJ | 140 | °C | continuous operation, long-term reliability | 5 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | over operating free-air temperature range | 5 | |
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply input voltage | VSS | 2.7 | 3.3 | 3.6 | V | over operating free-air temperature range | 5 |
| Operating junction temperature | TJ | -40 | 85 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 67.1 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 91.6 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 41.6 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 7.1 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 41.7 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 23.1 | °C/W | RGT (VQFN), 16 pins | 5 | ||
| Transimpedance gain error (±1%) | -1 | 1 | % | TA = 25°C, RF = 20 kΩ and RF = 5 kΩ | 6 | ||
| Transimpedance gain error (±15%) | -15 | 15 | % | TA = 25°C, RF = 20 kΩ and RF = 5 kΩ | 6 | ||
| Output offset voltage (±1 mV) | VOO | -1 | 1 | mV | TA = +25°C | 6 | |
| Output offset voltage (±5 mV) | VOO | -5 | 5 | mV | TA = +25°C | 6 | |
| Output offset voltage (±6 mV) | VOO | -6 | 6 | mV | TA = -40°C to +85°C | 6 | |
| Output offset voltage drift | -15 | 15 | μV/°C | TA = -40°C to +85°C | 6 | ||
| Common-mode voltage range | VICR | 1.78 | 1.83 | 1.88 | V | TA = 25°C, OUTN | 6 |
| Output voltage swing | 0.6 | 1.9 | V | OUT, TA = 25°C | 6 | ||
| Output voltage swing | 1.9 | V | OUT, TA = -40°C to +85°C | 6 | |||
| Output current drive (for linear operation) | -20 | 5 | mA | OUT, differential 50-Ω between OUT and OUTN | 6 | ||
| Quiescent operating current | 20.5 | 23.4 | 26.3 | mA | CTRL = 0, TA = 25°C | 7 | |
| Quiescent operating current | 20 | 26.8 | mA | CTRL = 0, TA = -40°C to +85°C | 7 | ||
| Power-supply rejection ratio | PSRR | 70 | 80 | dB | At dc, TA = 25°C | 7 | |
| Power-supply rejection ratio | PSRR | 15 | 18 | dB | f = 10 MHz, TA = -40°C to +85°C | 7 | |
| High-level input voltage (CTRL) | VIH | 2 | V | 7 | |||
| Low-level input voltage (CTRL) | VIL | 0.8 | V | 7 | |||
| High-level control pin input bias current | 1 | µA | 7 | ||||
| Low-level control pin input bias current | 1 | µA | 7 |
CAD (KiCad official)
- Symbol:
OPA857IRGTT - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
opa857irgtt-etched.step/opa857irgtt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa857irgtt.step/opa857irgtt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
ff31b2056049d38e, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).