Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA857IRGTR

Texas Instruments · Special Purpose Amplifiers · VQFN-16(3x3)

OPA857IRGTR from Texas Instruments, in a VQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground connection.
2 CTRL input Control input to select transimpedance gain: GND (logic 0) selects 5-kΩ internal resistance, +VS (logic 1) selects 20-kΩ internal resistance.
3 GND power_in Ground connection.
4 GND power_in Ground connection.
5 OUTN output Common-mode voltage output reference with 25-Ω series internal resistor.
6 GND power_in Ground connection.
7 GND power_in Ground connection.
8 OUT output Signal output with 25-Ω series internal resistor limiting load current.
9 +VS power_in Supply voltage input, 2.7 V to 3.6 V.
10 +VS power_in Supply voltage input, 2.7 V to 3.6 V.
11 +VS power_in Supply voltage input, 2.7 V to 3.6 V.
12 GND power_in Ground connection.
13 Test_SD input Test mode enable pin; connect to GND for normal operation, connect to +VS to enable test mode.
14 Test_IN input Test mode input; connect to +VS during normal operation.
15 IN input Transimpedance amplifier input with internal protection diodes, maximum 10-mA input current.
16 NC unconnected Not connected.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16(3x3)
Category Amplifiers/Comparators
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating free-air temperature TA -40 85 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage, VS– to VS+ 3.8 V 5
Output current 50 mA 5
Input current, VIN pin 10 mA 5
Maximum junction temperature TJ 150 °C 5
Maximum junction temperature (continuous operation) TJ 140 °C continuous operation, long-term reliability 5
Supply input voltage VSS 2.7 3.3 3.6 V 5
Operating junction temperature TJ -40 85 °C 5
Output offset voltage VOO -5 1 5 mV TA = +25°C 6
Output offset voltage VOO -6 6 mV TA = –40°C to +85°C 6
Output offset voltage drift -15 15 μV/°C TA = –40°C to +85°C 6
Common-mode voltage range (OUTN) VICR 1.78 1.83 1.88 V TA = 25°C, OUTN 6
Output voltage swing (OUT) 0.6 1.9 V OUT, TA = 25°C 6
Output voltage swing (OUT) 1.9 V TA = –40°C to +85°C 6
Transimpedance gain error -15 1 15 % TA = 25°C, RF = 20 kΩ and RF = 5 kΩ 6
Quiescent operating current 20.5 23.4 26.3 mA CTRL = 0, TA = 25°C 7
Quiescent operating current 20 26.8 mA CTRL = 0, TA = –40°C to +85°C 7
Power-supply rejection ratio PSRR 70 80 dB At dc, TA = 25°C 7
Power-supply rejection ratio PSRR 15 18 dB f = 10 MHz, TA = –40°C to +85°C 7
High-level input voltage (CTRL) VIH 2 V 7
Low-level input voltage (CTRL) VIL 0.8 V 7
High-level control pin input bias current 1 µA 7
Low-level control pin input bias current 1 µA 7
Small-signal bandwidth 105 MHz CTRL = 1, TA = –40°C to +85°C 6
Small-signal bandwidth 125 MHz CTRL = 0, TA = –40°C to +85°C 6
Slew rate (differential) SR 215 V/μs VOUT = 1-V step 6
Transimpedance gain into 500 Ω 18.2 kΩ CTRL = 1 into 500 Ω 6
Transimpedance gain into 500 Ω 4.5 kΩ CTRL = 0 into 500 Ω 6
Input pin capacitance 2 pF 6
Closed-loop output impedance 50 Ω f = 1 MHz (differential) 6
Output current drive (source) 5 mA OUT, differential 50-Ω between OUT and OUTN 6
Output current drive (sink) -20 mA OUT, differential 50-Ω between OUT and OUTN 6
Junction-to-ambient thermal resistance RθJA 67.1 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 91.6 °C/W 5
Junction-to-board thermal resistance RθJB 41.6 °C/W 5
Junction-to-top characterization parameter ψJT 7.1 °C/W 5
Junction-to-board characterization parameter ψJB 41.7 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 23.1 °C/W 5

CAD (KiCad official)

  • Symbol: OPA857IRGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: opa857irgtr-etched.step / opa857irgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa857irgtr.step / opa857irgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 345c9fe5e4bb5ed7, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF