← Commit history
Publish 0.1.2
8 files changed
+90−147
README.md+37−26@@ -8,15 +8,15 @@ OPA855IDSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descript | Pin | Name | Type | Function | |---|---|---|---|-| 1 | FB | input | Feedback connection to the output of the amplifier, which simplifies the feedback network between input and output. |-| 2 | NC | unconnected | Do not connect. |-| 3 | IN- | input | Inverting input of the amplifier. |-| 4 | IN+ | input | Noninverting input of the amplifier. |-| 5 | VS- | power_in | Negative voltage supply; the thermal pad must also be connected to VS-. |-| 6 | OUT | output | Amplifier output. |-| 7 | VS+ | power_in | Positive voltage supply; supply voltage range is 3.3V to 5.25V. |-| 8 | PD | input | Power-down connection: logic low puts the device in power-off mode and logic high gives normal operation. |-| 9 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |+| 1 | FB | input | Feedback connection to the amplifier output, internally tied to OUT, and it sits on the same package side as IN- so the feedback resistor can connect directly between FB and IN-. |+| 2 | NC | unconnected | Do not connect; this pin must be left floating and it isolates FB from IN- to reduce capacitive coupling. |+| 3 | IN- | input | Inverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V. |+| 4 | IN+ | input | Noninverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V. |+| 5 | VS- | power_in | Negative voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, and the thermal pad must be connected to this pin. |+| 6 | OUT | output | Amplifier output; continuous output current is limited to ±100 mA absolute maximum (long-term electromigration limit). |+| 7 | VS+ | power_in | Positive voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, with an absolute maximum of 5.5 V. |+| 8 | PD | input | Power-down pin referenced to VS-: logic low (disable threshold 0.65 V to 1 V) puts the amplifier in power-off mode, and logic high (enable threshold 1.5 V to 1.8 V) gives normal operation. |+| 9 | Thermal pad | power_in | Exposed thermal pad; the datasheet says to connect it to VS- and to solder it to the PCB for thermal and mechanical performance. | ## Key specifications @@ -33,35 +33,46 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|+| Total supply voltage (VS+, VS-) | VS | 3.3 | 5 | 5.25 | V | | 5 |+| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |+| Total supply voltage (VS+, VS-) | VS | | | 5.5 | V | | 5 |+| Differential input voltage | VID | | | 1 | V | | 5 |+| Continuous input current | IIN | -10 | | 10 | mA | | 5 |+| Continuous output current | IOUT | -100 | | 100 | mA | | 5 |+| Junction temperature | TJ | | | 150 | °C | | 5 |+| Operating free-air temperature range | TA | -40 | | 125 | °C | | 5 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |+| Junction-to-ambient thermal resistance | RθJA | | 80.1 | | °C/W | | 5 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 100 | | °C/W | | 5 |+| Junction-to-board thermal resistance | RθJB | | 45 | | °C/W | | 5 |+| Junction-to-top characterization parameter | ΨJT | | 6.8 | | °C/W | | 5 |+| Junction-to-board characterization parameter | ΨJB | | 45.2 | | °C/W | | 5 |+| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 22.7 | | °C/W | | 5 | | Open-loop voltage gain | AOL | 70 | 76 | | dB | | 6 | | Input offset voltage | VOS | -1.5 | 0.2 | 1.5 | mV | TA = 25°C | 6 | | Input bias current | IB | -18.5 | -12 | -5 | µA | TA = 25°C | 6 | | Input offset current | IBOS | -1 | 0.1 | 1 | µA | TA = 25°C | 6 | | Common-mode rejection ratio | CMRR | 90 | 100 | | dB | VCM = ±0.5 V referred to midsupply | 6 |-| Common-mode input range (high) | VIH | 2.7 | 2.9 | | V | CMRR > 80 dB, VS+ = 3.3 V | 6 |-| Common-mode input range (low) | VIL | 1.1 | 1.3 | | V | CMRR > 80 dB, VS+ = 3.3 V | 6 | | Common-mode input range (high) | VIH | 4.4 | 4.6 | | V | CMRR > 80 dB | 6 |+| Common-mode input range (high) | VIH | 4.3 | | | V | TA = -40°C to +125°C, CMRR > 80 dB | 6 |+| Common-mode input range (low) | VIL | | 1.1 | 1.3 | V | CMRR > 80 dB | 6 |+| Common-mode input range (low) | VIL | | | 1.3 | V | TA = -40°C to +125°C, CMRR > 80 dB | 6 |+| Common-mode input range (high) | VIH | 2.7 | 2.9 | | V | CMRR > 80 dB, VS+ = 3.3 V | 6 | | Output voltage (high) | VOH | 2.35 | 2.4 | | V | TA = 25°C, VS+ = 3.3 V | 7 | | Output voltage (high) | VOH | 3.95 | 4.1 | | V | TA = 25°C | 7 |-| Output voltage (low) | VOL | 1.05 | 1.15 | | V | TA = 25°C, VS+ = 3.3 V | 7 |+| Output voltage (high) | VOH | 4 | | | V | TA = -40°C to +125°C | 7 |+| Output voltage (low) | VOL | | 1.05 | 1.15 | V | TA = 25°C, VS+ = 3.3 V | 7 |+| Output voltage (low) | VOL | | | 1.1 | V | TA = -40°C to +125°C | 7 | | Linear output drive (sink and source) | IO_LIN | 65 | 80 | | mA | RL = 10 Ω, AOL > 60 dB | 7 |+| Linear output drive (sink and source) | IO_LIN | 70 | | | mA | TA = -40°C to +125°C, RL = 10 Ω, AOL > 60 dB | 7 | | Output short-circuit current | ISC | 85 | 105 | | mA | | 7 | | Quiescent current | IQ | 16 | 17.8 | 19.5 | mA | | 7 | | Positive power-supply rejection ratio | PSRR+ | 80 | 86 | | dB | | 7 | | Negative power-supply rejection ratio | PSRR- | 70 | 80 | | dB | | 7 |-| Total supply voltage (VS+, VS-) | VS | 3.3 | 5 | 5.25 | V | | 5 |-| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |-| Total supply voltage (VS+, VS-) | VS | | | 5.5 | V | | 5 |-| Differential input voltage | VID | | | 1 | V | | 5 |-| Continuous input current | IIN | -10 | | 10 | mA | | 5 |-| Continuous output current | IOUT | -100 | | 100 | mA | | 5 |-| Junction temperature | TJ | | | 150 | °C | | 5 |-| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |-| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |-| Junction-to-ambient thermal resistance (DSG WSON) | RθJA | | 80.1 | | °C/W | | 5 |-| Junction-to-case (top) thermal resistance (DSG WSON) | RθJC(top) | | 100 | | °C/W | | 5 |-| Junction-to-board thermal resistance (DSG WSON) | RθJB | | 45 | | °C/W | | 5 |-| Junction-to-case (bottom) thermal resistance (DSG WSON) | RθJC(bot) | | 22.7 | | °C/W | | 5 |+| Disable voltage threshold | | | 0.65 | 1 | V | Amplifier off when less than this voltage | 7 |+| Enable voltage threshold | | 1.5 | 1.8 | | V | Amplifier on when less than this voltage | 7 |+| Power-down quiescent current | | | 70 | 140 | µA | | 7 |+| PD bias current | | | 70 | 140 | µA | | 7 | ## CAD (KiCad official) @@ -74,7 +85,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa855.pdf) (41 pp, sha256 `c4f3b2ce2730ec03`, retrieved 2026-11-09, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa855.pdf) (41 pp, sha256 `c4f3b2ce2730ec03`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
opa855idsgt-hero.glb⋯ 1 unchanged line ⋯
opa855idsgt-hero.overlay.json+3−3@@ -74,9 +74,9 @@ "footprint": "opa855idsgt.kicad_mod", "footprint_sha256": "ba8fb7b95610c06a9f573411676f949bf6b8285166a19b897219fe27f0ce32b9", "pins": "page.json component.pins",- "pins_sha256": "9a5c0508c9c68a5724800db5ca1bcb5a68c28e8f0610991dd6fe7477bb8dede7"+ "pins_sha256": "00cbf9221f77219900b65d6210bccb500c5747f5e1c4abbb4014ec2c517884c5" },- "generator": "adom-wiki 1.8.14 (component_hero)",+ "generator": "adom-wiki 1.8.18 (component_hero)", "labels": [ { "pad": "1",@@ -98,7 +98,7 @@ }, { "pad": "3",- "text": "IN-",+ "text": "IN–", "x": -1.3, "y": 0.25, "align": "right",
opa855idsgt.kicad_sym+2−2@@ -17,7 +17,7 @@ (number "2" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 0.00 0) (length 5.08)- (name "IN-" (effects (font (size 1.27 1.27))))+ (name "IN–" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 -2.54 0) (length 5.08)@@ -28,7 +28,7 @@ (name "VS–" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 2.54 180) (length 5.08)+ (pin power_in line (at 17.78 2.54 180) (length 5.08) (name "Thermal pad" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) )
opa855idsgt.lbr+3−3@@ -91,10 +91,10 @@ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text> <pin name="FB" x="-17.78" y="5.08" length="middle" direction="in"/> <pin name="NC" x="-17.78" y="2.54" length="middle" direction="nc"/>- <pin name="IN-" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="IN" x="-17.78" y="0" length="middle" direction="in"/> <pin name="IN+" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="VS" x="-17.78" y="-5.08" length="middle" direction="pwr"/>- <pin name="Thermal_pad" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="Thermal_pad" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/> <pin name="PD" x="17.78" y="0" length="middle" direction="in" rot="R180"/> <pin name="VS+" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/> <pin name="OUT" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>@@ -111,7 +111,7 @@ <connects> <connect gate="G$1" pin="FB" pad="1"/> <connect gate="G$1" pin="NC" pad="2"/>- <connect gate="G$1" pin="IN-" pad="3"/>+ <connect gate="G$1" pin="IN" pad="3"/> <connect gate="G$1" pin="IN+" pad="4"/> <connect gate="G$1" pin="VS" pad="5"/> <connect gate="G$1" pin="Thermal_pad" pad="9"/>
package.json+22−24@@ -1,6 +1,6 @@ { "slug": "opa855idsgt",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Texas Instruments Operational Amplifier, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -29,8 +29,7 @@ "viewers/footprint.html", "opa855idsgt-hero.glb", "opa855idsgt-hero.overlay.json",- "opa855idsgt-etched.glb",- "opa855idsgt-etched.step"+ "opa855idsgt-etched.glb" ], "component": { "mpn": "OPA855IDSGT",@@ -55,7 +54,7 @@ "mouser": "595-OPA855IDSGT" }, "distributor_check": {- "checked_at": "2026-11-09T22:17:08Z",+ "checked_at": "2026-11-11T08:40:22Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-53159-2-ND",@@ -71,55 +70,55 @@ "number": "1", "name": "FB", "type": "input",- "description": "Feedback connection to the output of the amplifier, which simplifies the feedback network between input and output."+ "description": "Feedback connection to the amplifier output, internally tied to OUT, and it sits on the same package side as IN- so the feedback resistor can connect directly between FB and IN-." }, { "number": "2", "name": "NC", "type": "unconnected",- "description": "Do not connect."+ "description": "Do not connect; this pin must be left floating and it isolates FB from IN- to reduce capacitive coupling." }, { "number": "3",- "name": "IN-",+ "name": "IN–", "type": "input",- "description": "Inverting input of the amplifier."+ "description": "Inverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V." }, { "number": "4", "name": "IN+", "type": "input",- "description": "Noninverting input of the amplifier."+ "description": "Noninverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V." }, { "number": "5", "name": "VS–", "type": "power_in",- "description": "Negative voltage supply; the thermal pad must also be connected to VS-."+ "description": "Negative voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, and the thermal pad must be connected to this pin." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output."+ "description": "Amplifier output; continuous output current is limited to ±100 mA absolute maximum (long-term electromigration limit)." }, { "number": "7", "name": "VS+", "type": "power_in",- "description": "Positive voltage supply; supply voltage range is 3.3V to 5.25V."+ "description": "Positive voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, with an absolute maximum of 5.5 V." }, { "number": "8", "name": "PD", "type": "input",- "description": "Power-down connection: logic low puts the device in power-off mode and logic high gives normal operation."+ "description": "Power-down pin referenced to VS-: logic low (disable threshold 0.65 V to 1 V) puts the amplifier in power-off mode, and logic high (enable threshold 1.5 V to 1.8 V) gives normal operation." }, { "number": "9", "name": "Thermal pad",- "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ "type": "power_in",+ "description": "Exposed thermal pad; the datasheet says to connect it to VS- and to solder it to the PCB for thermal and mechanical performance." } ], "provenance": {@@ -133,12 +132,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The exposed thermal pad is not numbered in the datasheet pin table. Per the datasheet it must be con",- "exposed pad 9 added from the footprint"+ "extractor flagged: The datasheet pin table lists the thermal pad with no number. The number '9' comes from the package ; The datasheet's enable-threshold wording on page 7 reads 'Amplifier on when less than this voltage'," ],- "pages_sent": 8,- "cost_usd": 0.1569,- "at": "2026-11-09T22:16:54"+ "pages_sent": 41,+ "cost_usd": 0.1662,+ "at": "2026-11-11T08:40:07" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/opa855.pdf",@@ -175,7 +173,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",- "checked": "2026-11-09",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -193,13 +191,13 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "23cbdcd252e67a8cde3b667c1bdf3b88e8e68e149ace6de4fe2558b2b153f5df",- "checked": "2026-11-09",+ "sha256": "6a21da9c02c11b2c16edd4de833120881e9dcd3e6f845e63c97158416bf1f3d9",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "DSG0008A",+ "package_code": "DSG (DSG0008A, WSON-8)", "source_page": 38, "D": { "nom_mm": 2.0,
page.json+22−24@@ -4,7 +4,7 @@ "slug": "opa855idsgt", "title": "OPA855IDSGT", "brief": "Texas Instruments Operational Amplifier, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "595-OPA855IDSGT" }, "distributor_check": {- "checked_at": "2026-11-09T22:17:08Z",+ "checked_at": "2026-11-11T08:40:22Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-53159-2-ND",@@ -52,55 +52,55 @@ "number": "1", "name": "FB", "type": "input",- "description": "Feedback connection to the output of the amplifier, which simplifies the feedback network between input and output."+ "description": "Feedback connection to the amplifier output, internally tied to OUT, and it sits on the same package side as IN- so the feedback resistor can connect directly between FB and IN-." }, { "number": "2", "name": "NC", "type": "unconnected",- "description": "Do not connect."+ "description": "Do not connect; this pin must be left floating and it isolates FB from IN- to reduce capacitive coupling." }, { "number": "3",- "name": "IN-",+ "name": "IN–", "type": "input",- "description": "Inverting input of the amplifier."+ "description": "Inverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V." }, { "number": "4", "name": "IN+", "type": "input",- "description": "Noninverting input of the amplifier."+ "description": "Noninverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V." }, { "number": "5", "name": "VS–", "type": "power_in",- "description": "Negative voltage supply; the thermal pad must also be connected to VS-."+ "description": "Negative voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, and the thermal pad must be connected to this pin." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output."+ "description": "Amplifier output; continuous output current is limited to ±100 mA absolute maximum (long-term electromigration limit)." }, { "number": "7", "name": "VS+", "type": "power_in",- "description": "Positive voltage supply; supply voltage range is 3.3V to 5.25V."+ "description": "Positive voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, with an absolute maximum of 5.5 V." }, { "number": "8", "name": "PD", "type": "input",- "description": "Power-down connection: logic low puts the device in power-off mode and logic high gives normal operation."+ "description": "Power-down pin referenced to VS-: logic low (disable threshold 0.65 V to 1 V) puts the amplifier in power-off mode, and logic high (enable threshold 1.5 V to 1.8 V) gives normal operation." }, { "number": "9", "name": "Thermal pad",- "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ "type": "power_in",+ "description": "Exposed thermal pad; the datasheet says to connect it to VS- and to solder it to the PCB for thermal and mechanical performance." } ], "provenance": {@@ -114,12 +114,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The exposed thermal pad is not numbered in the datasheet pin table. Per the datasheet it must be con",- "exposed pad 9 added from the footprint"+ "extractor flagged: The datasheet pin table lists the thermal pad with no number. The number '9' comes from the package ; The datasheet's enable-threshold wording on page 7 reads 'Amplifier on when less than this voltage'," ],- "pages_sent": 8,- "cost_usd": 0.1569,- "at": "2026-11-09T22:16:54"+ "pages_sent": 41,+ "cost_usd": 0.1662,+ "at": "2026-11-11T08:40:07" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/opa855.pdf",@@ -156,7 +155,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",- "checked": "2026-11-09",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -174,13 +173,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "23cbdcd252e67a8cde3b667c1bdf3b88e8e68e149ace6de4fe2558b2b153f5df",- "checked": "2026-11-09",+ "sha256": "6a21da9c02c11b2c16edd4de833120881e9dcd3e6f845e63c97158416bf1f3d9",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "DSG0008A",+ "package_code": "DSG (DSG0008A, WSON-8)", "source_page": 38, "D": { "nom_mm": 2,@@ -619,8 +618,7 @@ "viewers/footprint.html", "opa855idsgt-hero.glb", "opa855idsgt-hero.overlay.json",- "opa855idsgt-etched.glb",- "opa855idsgt-etched.step"+ "opa855idsgt-etched.glb" ], "visibility": { "public": true
viewers/symbol.html+1−65@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>ADOM/OPA855IDSGT symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -350 1500 700' style='width:100%;height:100%'><rect x='-500.0' y='-300.0' width='1000.0' height='600.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='FB'><line class='pinvis' x1='-700.0' y1='-200.0' x2='-500.0' y2='-200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-200.0' x2='-500.0' y2='-200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-155.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-200.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>FB</text><g class='pingroup' data-num='2' data-name='NC'><line class='pinvis' x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>NC</text><g class='pingroup' data-num='3' data-name='IN-'><line class='pinvis' x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>IN-</text><g class='pingroup' data-num='4' data-name='IN+'><line class='pinvis' x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='-470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>IN+</text><g class='pingroup' data-num='5' data-name='VS–'><line class='pinvis' x1='-700.0' y1='200.0' x2='-500.0' y2='200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='200.0' x2='-500.0' y2='200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='245.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='-470.0' y='200.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VS–</text><g class='pingroup' data-num='9' data-name='Thermal pad'><line class='pinvis' x1='700.0' y1='-100.0' x2='500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-100.0' x2='500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>9</text><text x='470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>Thermal pad</text><g class='pingroup' data-num='8' data-name='PD'><line class='pinvis' x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>8</text><text x='470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PD</text><g class='pingroup' data-num='7' data-name='VS+'><line class='pinvis' x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>7</text><text x='470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VS+</text><g class='pingroup' data-num='6' data-name='OUT'><line class='pinvis' x1='700.0' y1='200.0' x2='500.0' y2='200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='200.0' x2='500.0' y2='200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='155.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>6</text><text x='470.0' y='200.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUT</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="ADOM/OPA855IDSGT", PINS=[{"desc":"","name":"FB","number":"1","type":""},{"desc":"","name":"NC","number":"2","type":""},{"desc":"","name":"IN-","number":"3","type":""},{"desc":"","name":"IN+","number":"4","type":""},{"desc":"","name":"VS–","number":"5","type":""},{"desc":"","name":"Thermal pad","number":"9","type":""},{"desc":"","name":"PD","number":"8","type":""},{"desc":"","name":"VS+","number":"7","type":""},{"desc":"","name":"OUT","number":"6","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+' '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){- var n=g.getAttribute('data-num');- g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});- g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});- g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){- function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}- apply(b.classList.contains('on'));- b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>opa855idsgt</title>