3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA855IDSGT
Texas Instruments · Operational Amplifier · WSON-8-EP(2x2)
OPA855IDSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback connection to the amplifier output, internally tied to OUT, and it sits on the same package side as IN- so the feedback resistor can connect directly between FB and IN-. |
| 2 | NC | unconnected | Do not connect; this pin must be left floating and it isolates FB from IN- to reduce capacitive coupling. |
| 3 | IN- | input | Inverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V. |
| 4 | IN+ | input | Noninverting input; input voltages must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V. |
| 5 | VS- | power_in | Negative voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, and the thermal pad must be connected to this pin. |
| 6 | OUT | output | Amplifier output; continuous output current is limited to ±100 mA absolute maximum (long-term electromigration limit). |
| 7 | VS+ | power_in | Positive voltage supply; total supply (VS+ - VS-) is specified from 3.3 V to 5.25 V, with an absolute maximum of 5.5 V. |
| 8 | PD | input | Power-down pin referenced to VS-: logic low (disable threshold 0.65 V to 1 V) puts the amplifier in power-off mode, and logic high (enable threshold 1.5 V to 1.8 V) gives normal operation. |
| 9 | Thermal pad | power_in | Exposed thermal pad; the datasheet says to connect it to VS- and to solder it to the PCB for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total supply voltage (VS+, VS-) | VS | 3.3 | 5 | 5.25 | V | 5 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 5 | ||
| Total supply voltage (VS+, VS-) | VS | 5.5 | V | 5 | |||
| Differential input voltage | VID | 1 | V | 5 | |||
| Continuous input current | IIN | -10 | 10 | mA | 5 | ||
| Continuous output current | IOUT | -100 | 100 | mA | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Operating free-air temperature range | TA | -40 | 125 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 80.1 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 100 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 45 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | 6.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 45.2 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 22.7 | °C/W | 5 | |||
| Open-loop voltage gain | AOL | 70 | 76 | dB | 6 | ||
| Input offset voltage | VOS | -1.5 | 0.2 | 1.5 | mV | TA = 25°C | 6 |
| Input bias current | IB | -18.5 | -12 | -5 | µA | TA = 25°C | 6 |
| Input offset current | IBOS | -1 | 0.1 | 1 | µA | TA = 25°C | 6 |
| Common-mode rejection ratio | CMRR | 90 | 100 | dB | VCM = ±0.5 V referred to midsupply | 6 | |
| Common-mode input range (high) | VIH | 4.4 | 4.6 | V | CMRR > 80 dB | 6 | |
| Common-mode input range (high) | VIH | 4.3 | V | TA = -40°C to +125°C, CMRR > 80 dB | 6 | ||
| Common-mode input range (low) | VIL | 1.1 | 1.3 | V | CMRR > 80 dB | 6 | |
| Common-mode input range (low) | VIL | 1.3 | V | TA = -40°C to +125°C, CMRR > 80 dB | 6 | ||
| Common-mode input range (high) | VIH | 2.7 | 2.9 | V | CMRR > 80 dB, VS+ = 3.3 V | 6 | |
| Output voltage (high) | VOH | 2.35 | 2.4 | V | TA = 25°C, VS+ = 3.3 V | 7 | |
| Output voltage (high) | VOH | 3.95 | 4.1 | V | TA = 25°C | 7 | |
| Output voltage (high) | VOH | 4 | V | TA = -40°C to +125°C | 7 | ||
| Output voltage (low) | VOL | 1.05 | 1.15 | V | TA = 25°C, VS+ = 3.3 V | 7 | |
| Output voltage (low) | VOL | 1.1 | V | TA = -40°C to +125°C | 7 | ||
| Linear output drive (sink and source) | IO_LIN | 65 | 80 | mA | RL = 10 Ω, AOL > 60 dB | 7 | |
| Linear output drive (sink and source) | IO_LIN | 70 | mA | TA = -40°C to +125°C, RL = 10 Ω, AOL > 60 dB | 7 | ||
| Output short-circuit current | ISC | 85 | 105 | mA | 7 | ||
| Quiescent current | IQ | 16 | 17.8 | 19.5 | mA | 7 | |
| Positive power-supply rejection ratio | PSRR+ | 80 | 86 | dB | 7 | ||
| Negative power-supply rejection ratio | PSRR- | 70 | 80 | dB | 7 | ||
| Disable voltage threshold | 0.65 | 1 | V | Amplifier off when less than this voltage | 7 | ||
| Enable voltage threshold | 1.5 | 1.8 | V | Amplifier on when less than this voltage | 7 | ||
| Power-down quiescent current | 70 | 140 | µA | 7 | |||
| PD bias current | 70 | 140 | µA | 7 |
CAD (KiCad official)
- Symbol:
OPA855IDSGT - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
opa855idsgt-etched.step/opa855idsgt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa855idsgt.step/opa855idsgt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
c4f3b2ce2730ec03, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).