Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA855IDSGR

Texas Instruments · Operational Amplifier · WSON-8-EP(2x2)

OPA855IDSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input pin; connect to feedback network for transimpedance amplifier or gain-of-voltage configurations.
2 NC unconnected No connect pin; provides isolation between FB and IN- pins to minimize parasitic capacitance coupling.
3 IN- input Inverting input pin; common-mode input voltage range 1.1V to 4.6V at 5V supply with CMRR >80dB.
4 IN+ input Non-inverting input pin; common-mode input voltage range 1.1V to 4.6V at 5V supply with CMRR >80dB.
5 VS- power_in Negative power supply pin; connect to ground in single-supply or negative rail in split-supply configuration.
6 OUT output Amplifier output pin; maximum output swing 3VPP with output current capability up to 65-80mA.
7 VS+ power_in Positive power supply pin; operating voltage range 3.3V to 5.25V with 17.8mA typical quiescent current at 5V.
8 PD input Power-down control pin; logic low voltage (≤0.65V) disables amplifier for low-power operation, logic high (≥1.8V) enables normal operation.
9 Thermal Pad power_in Exposed thermal pad; must be soldered to printed circuit board and connected to VS- for thermal management and mechanical stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Amplifiers/Comparators
Pins 9

CAD (KiCad official)

  • Symbol: OPA855IDSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: opa855idsgr-etched.step / opa855idsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa855idsgr.step / opa855idsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 5e52d07442851fb9, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF