Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA847ID

Texas Instruments · Operational Amplifier · SOIC-8

OPA847ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection on the SO-8 package (NC = No Connection).
2 Inverting Input input Inverting input of the amplifier, used with the feedback and gain resistors in the inverting configuration.
3 Noninverting Input input Noninverting input; the common-mode input range is ±3.3V typ over temperature limits of ±2.9V min at ±5V supply.
4 -VS power_in Negative power supply; specified operating voltage is ±5V and maximum operating voltage is ±6V.
5 NC unconnected No connection on the SO-8 package (NC = No Connection).
6 Output output Amplifier output; output current is specified at 100 mA min sourcing and -75 mA max sinking at VO = 0V.
7 +VS power_in Positive power supply; specified operating voltage is ±5V and maximum operating voltage is ±6V.
8 DIS input Power-down pin, referenced to +VS: pulled low (off voltage 1.8V max) disables the amplifier, while enabled high (3.5V min) or floated keeps it operating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Gain Bandwidth Product GBP 3100 3900 MHz G ≥ +50 3
Closed-Loop Bandwidth 230 350 MHz G = +20, RG = 39.2Ω, VO = 200mVPP 3
Closed-Loop Bandwidth 63 78 MHz G = +50, RG = 39.2Ω, VO = 200mVPP 3
Bandwidth for 0.1dB Gain Flatness 40 60 MHz G = +20, RL = 100Ω 3
Peaking at a Gain of +12 4.5 7 dB 3
2nd-Harmonic Distortion -74 -70 dBc G = +20, f = 5MHz, VO = 2VPP, RL = 100Ω 3
2nd-Harmonic Distortion -105 -90 dBc G = +20, f = 5MHz, VO = 2VPP, RL = 500Ω 3
3rd-Harmonic Distortion -103 -96 dBc G = +20, f = 5MHz, VO = 2VPP, RL = 100Ω 3
3rd-Harmonic Distortion -110 -105 dBc G = +20, f = 5MHz, VO = 2VPP, RL = 500Ω 3
2-Tone, 3rd-Order Intercept 37 39 dBm G = +20, f = 20MHz 3
Input Voltage Noise Density 0.85 0.92 nV/√Hz f > 1MHz 3
Input Current Noise Density 2.5 3.5 pA/√Hz f > 1MHz 3
Rise-and-Fall Time 1.2 1.75 ns 0.2V Step 3
Slew Rate 700 950 V/µs 2V Step 3
Settling Time to 0.1% 10 12 ns 2V Step 3
Settling Time to 1% 6 8 ns 2V Step 3
Open-Loop Voltage Gain AOL 90 98 dB VO = 0V 3
Input Offset Voltage VIO -0.5 0.1 0.5 mV VCM = 0V 3
Average Offset Voltage Drift -0.25 0.25 0.25 µV/°C VCM = 0V 3
Input Bias Current IB -19 -39 µA VCM = 0V 3
Input Offset Current IIO -0.6 0.1 0.6 µA VCM = 0V 3
Common-Mode Input Range CMIR 3.1 3.3 V 3
Common-Mode Rejection Ratio CMRR 95 110 dB VCM = ±0.5V, Input-Referred 3
Output Voltage Swing VO 3.3 3.5 V ≥ 400Ω Load 3
Output Voltage Swing VO 3.2 3.4 V 100Ω Load 3
Current Output, Sourcing IO 60 100 mA VO = 0V 3
Current Output, Sinking IO -60 -75 mA VO = 0V 3
Maximum Operating Voltage 6 6 V 3
Maximum Quiescent Current IQ 18.1 18.4 mA VS = ±5V 3
Minimum Quiescent Current IQ 17.8 18.1 mA VS = ±5V 3
Power-Supply Rejection Ratio PSRR 95 100 dB /VS/ = 4.5V to 5.5V, Input-Referred 3
Power-Down Quiescent Current (+VS) -200 -270 µA 3
On Voltage (enabled high or floated) 3.75 3.5 V enabled high or floated 3
Off Voltage (disabled asserted low) 1.8 1.7 V disabled asserted low 3
Power-Down Pin Input Bias Current 150 190 µA VDIS = 0 3
Supply Voltage VS -6.5 6.5 V Power Supply, VDC 2
Differential Input Voltage VID -1.2 1.2 V 2
Storage Temperature Range TSTG -65 125 °C D package 2
Lead Temperature 300 °C soldering, 10s 2
Junction Temperature TJ 150 °C 2
ESD Rating (Human Body Model) 1500 V Human Body Model 2
Thermal Resistance, Junction-to-Ambient θJA 125 °C/W D SO-8 3

CAD (KiCad official)

  • Symbol: OPA847ID
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa847id-etched.step / opa847id-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa847id.step / opa847id.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 d61c58b5cdb72b10, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF