3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA820ID
Texas Instruments · Operational Amplifier · SOIC-8
OPA820ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave unconnected. |
| 2 | Inverting Input | input | Inverting input of the operational amplifier. |
| 3 | Noninverting Input | input | Noninverting input of the operational amplifier. |
| 4 | -VS | power_in | Negative power supply. |
| 5 | NC | unconnected | No internal connection; leave unconnected. |
| 6 | Output | output | Output of the amplifier. |
| 7 | +VS | power_in | Positive power supply. |
| 8 | NC | unconnected | No internal connection; leave unconnected. The pin-function table also lists a Disable function on this pin, which conflicts with this entry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-signal bandwidth | 170 | 240 | MHz | VS = ±5 V, G = 2, VO = 0.1 VPP, TA = 25°C | 4 | ||
| Gain-bandwidth product | 220 | 280 | MHz | VS = ±5 V, G ≥ 20, TA = 25°C | 4 | ||
| Slew rate | 192 | 240 | V/µs | VS = ±5 V, G = 2, 2-V step, TA = 25°C | 4 | ||
| Input voltage noise | 2.5 | 2.7 | nV/√Hz | VS = ±5 V, f > 100 kHz, TA = 25°C | 4 | ||
| Input current noise | 1.7 | 2.6 | pA/√Hz | VS = ±5 V, f > 100 kHz, TA = 25°C | 4 | ||
| Open-loop voltage gain | AOL | 62 | 66 | dB | VS = ±5 V, VCM = 0 V, TA = 25°C | 5 | |
| Input offset voltage | -0.7 | 0.2 | 0.7 | mV | VS = ±5 V, VCM = 0 V, TA = 25°C | 5 | |
| Input offset voltage | -1 | 1 | mV | VS = ±5 V, VCM = 0 V, TA = 0°C to 70°C | 5 | ||
| Input offset voltage | -1.2 | 1.2 | mV | VS = ±5 V, VCM = 0 V, TA = -40°C to 85°C | 5 | ||
| Input bias current | -17 | -9 | µA | VS = ±5 V, VCM = 0 V, TA = 25°C | 5 | ||
| Input offset current | -400 | 100 | 400 | nA | VS = ±5 V, VCM = 0 V, TA = 25°C | 5 | |
| Common-mode input range | CMIR | -4 | 3.8 | 4 | V | VS = ±5 V, TA = 25°C | 6 |
| Common-mode rejection ratio | CMRR | 76 | 85 | dB | VS = ±5 V, VCM = 0 V, input-referred, TA = 25°C | 6 | |
| Output voltage swing | 3.5 | 3.7 | V | VS = ±5 V, no load, TA = 25°C | 6 | ||
| Output voltage swing | 3.5 | 3.6 | V | VS = ±5 V, RL = 100 Ω, TA = 25°C | 6 | ||
| Output current | 90 | 110 | mA | VS = ±5 V, VO = 0 V, TA = 25°C | 6 | ||
| Quiescent current | 5.45 | 5.6 | 5.75 | mA | VS = ±5 V, TA = 25°C | 6 | |
| Power-supply rejection ratio | PSRR | 64 | 72 | dB | VS = ±5 V, input referred, TA = 25°C | 6 | |
| Small-signal bandwidth | 168 | 230 | MHz | VS = 5 V, G = 2, VO = 0.1 VPP, TA = 25°C | 7 | ||
| Gain-bandwidth product | 200 | 260 | MHz | VS = 5 V, G ≥ 20, TA = 25°C | 7 | ||
| Slew rate | 145 | 200 | V/µs | VS = 5 V, G = 2, 2-V step, TA = 25°C | 7 | ||
| Open-loop voltage gain | AOL | 60 | 65 | dB | VS = 5 V, VO = 2.5 V, TA = 25°C | 8 | |
| Input offset voltage | -1.1 | 0.3 | 1.1 | mV | VS = 5 V, VCM = 2.5 V, TA = 25°C | 8 | |
| Input bias current | -16 | -8 | µA | VS = 5 V, VCM = 2.5 V, TA = 25°C | 8 | ||
| Input offset current | -400 | 100 | 400 | nA | VS = 5 V, VCM = 2.5 V, TA = 25°C | 8 | |
| Common-mode rejection ratio | CMRR | 74 | 83 | dB | VS = 5 V, VCM = 2.5 V, input-referred, TA = 25°C | 8 | |
| Most positive output voltage | 3.8 | 3.9 | V | VS = 5 V, no load, TA = 25°C | 9 | ||
| Output current | 80 | 105 | mA | VS = 5 V, VO = 2.5 V, TA = 25°C | 9 | ||
| Quiescent current | 4.4 | 5 | 5.4 | mA | VS = ±5 V (as printed in 5 V table), TA = 25°C | 9 | |
| Power supply voltage | -6.5 | 6.5 | VDC | Power supply ±6.5 VDC | 3 | ||
| Differential input voltage | -1.2 | 1.2 | V | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 125 | °C | 3 | ||
| Total supply voltage | VS | 5 | 10 | 12 | V | 4 | |
| Operating ambient temperature | TA | -45 | 25 | 85 | °C | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 125 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 72.6 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 68.2 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 28.1 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 67.8 | °C/W | D (SOIC) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
OPA820ID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa820id-etched.step/opa820id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa820id.step/opa820id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
1d87233297dbd2e2, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).