OPA695IDBVR

@@ -0,0 +1,49 @@+# OPA695IDBVR++**Texas Instruments** · Operational Amplifier · SOT-23-6++OPA695IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Output | output | Op-amp output. Drives ±4.2 V into typical loads on a ±5 V supply; large-signal bandwidth 450 MHz at G=+8, VO=4 VPP. |+| 2 | -Vs | power_in | Negative supply rail. Typical split-supply operation ±5 V; recommended range ±2.5 V to ±6 V. Bypass locally with a low-ESR ceramic to ground. |+| 3 | Non-inverting Input | input | High-impedance non-inverting input (+IN) of the current-feedback amplifier. Input common-mode voltage rating ±Vs (see absolute maximums). |+| 4 | Inverting Input | input | Low-impedance inverting input (-IN) of the current-feedback amplifier; feedback resistor RF (typ. 348-523 Ω depending on gain) connects here. Sets loop gain and bandwidth in a CFB topology. |+| 5 | DIS | input | Active-low disable / enable control (labeled "Not disable (Enable)" in the pin table, bar over DIS in the pinout drawing). Leave floating or hold HIGH for normal operation; pull LOW to place the amplifier in a low-power state (supply drops to <170 µA, 0.5 mW). |+| 6 | +Vs | power_in | Positive supply rail. Typical split-supply operation ±5 V; recommended range ±2.5 V to ±6 V (single-supply 5-12 V also supported). Bypass locally with a low-ESR ceramic to ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-6 |+| Category | Op-amp/Cmp |+| Pins | 6 |++## Ordering variants++- `OPA695IDBVR`+- `OPA695IDBVRIDBVT`+- `OPA695IDBVRIDGKR`+- `OPA695IDBVRIDGKT`+- `OPA695IDBVRIDR`++## CAD (KiCad official)++- Symbol: `OPA695IDBVR`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa695i.pdf) (58 pp, sha256 `7302662e1a17370e`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opa695idbvr-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "opa695idbvr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Operational Amplifier, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "opa695idbvr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "opa695idbvr.kicad_sym",+    "opa695idbvr.kicad_mod",+    "opa695idbvr.glb",+    "opa695idbvr.step",+    "opa695idbvr.lbr",+    "docs/hero.png",+    "docs/opa695idbvr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file