component

OPA695IDBVR

Public Made by Adom

by adom

Texas Instruments Operational Amplifier, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpopa695idbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

OPA695IDBVR

Texas Instruments · Operational Amplifier · SOT-23-6

OPA695IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Op-amp output. Drives ±4.2 V into typical loads on a ±5 V supply; large-signal bandwidth 450 MHz at G=+8, VO=4 VPP.
2 -Vs power_in Negative supply rail. Typical split-supply operation ±5 V; recommended range ±2.5 V to ±6 V. Bypass locally with a low-ESR ceramic to ground.
3 Non-inverting Input input High-impedance non-inverting input (+IN) of the current-feedback amplifier. Input common-mode voltage rating ±Vs (see absolute maximums).
4 Inverting Input input Low-impedance inverting input (-IN) of the current-feedback amplifier; feedback resistor RF (typ. 348-523 Ω depending on gain) connects here. Sets loop gain and bandwidth in a CFB topology.
5 DIS input Active-low disable / enable control (labeled "Not disable (Enable)" in the pin table, bar over DIS in the pinout drawing). Leave floating or hold HIGH for normal operation; pull LOW to place the amplifier in a low-power state (supply drops to <170 µA, 0.5 mW).
6 +Vs power_in Positive supply rail. Typical split-supply operation ±5 V; recommended range ±2.5 V to ±6 V (single-supply 5-12 V also supported). Bypass locally with a low-ESR ceramic to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Op-amp/Cmp
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • OPA695IDBVR
  • OPA695IDBVT
  • OPA695IDBVRIDGKR
  • OPA695IDBVRIDGKT
  • OPA695IDBVRIDR

CAD (KiCad official)

  • Symbol: OPA695IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: opa695idbvr-etched.step / opa695idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa695idbvr.step / opa695idbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
opa695idbvr.step 97 KB You want the bare part, or you mark your own boards.
opa695idbvr-etched.step 2.1 MB You want the part with OPA695IDBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 516 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 7302662e1a17370e, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF