Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA694IDBVT

Texas Instruments · Operational Amplifier · SOT-23-5

OPA694IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Output output Amplifier output, with ±80mA output drive and less than 1.5V output voltage headroom.
2 -VS power_in Negative power supply; total supply is limited to ±6.5VDC absolute maximum.
3 Noninverting Input input Noninverting input with 280kΩ
4 Inverting Input input Inverting input of the current feedback amplifier with 30Ω open-loop input resistance, input range up to ±VS and differential input voltage limited to ±1.2V absolute maximum.
5 +VS power_in Positive power supply; total supply is limited to ±6.5VDC absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply 6.5 VDC 2
Differential Input Voltage -1.2 1.2 V 2
Storage Temperature Range -65 125 °C D, DBV 2
Junction Temperature TJ 150 °C 2
ESD HBM 1500 V Human Body Model 2
ESD CDM 1000 V Charge Device Model 2
ESD MM 100 V Machine Model 2
Small-Signal Bandwidth G=+2 350 690 MHz G = +2, VO = 0.5VPP, RF = 402Ω; +25°C 3
Small-Signal Bandwidth G=+5 200 250 MHz G = +5, VO = 0.5VPP, RF = 318Ω; +25°C 3
Small-Signal Bandwidth G=+10 150 200 MHz G = +10, VO = 0.5VPP, RF = 178Ω; +25°C 3
Slew Rate 1300 1700 V/µs G = +2, 2V Step; +25°C 3
2nd-Harmonic Distortion RL=100Ω -68 -63 dBc G = +2, f = 5MHz, VO = 2VPP, RL = 100Ω; +25°C 3
2nd-Harmonic Distortion RL≥500Ω -92 -87 dBc G = +2, f = 5MHz, VO = 2VPP, RL ≥ 500Ω; +25°C 3
3rd-Harmonic Distortion RL=100Ω -72 -69 dBc G = +2, f = 5MHz, VO = 2VPP, RL = 100Ω; +25°C 3
3rd-Harmonic Distortion RL≥500Ω -93 -88 dBc G = +2, f = 5MHz, VO = 2VPP, RL ≥ 500Ω; +25°C 3
Input Voltage Noise Density 2.1 2.4 nV/√Hz f > 1MHz; +25°C 3
Inverting Input Current Noise Density 22 24 pA/√Hz f > 1MHz; +25°C 3
Noninverting Input Current Noise Density 24 26 pA/√Hz f > 1MHz; +25°C 3
NTSC Differential Gain RL=150Ω 0.03 % VO - 1.4VPP, RL = 150Ω 3
Open-Loop Transimpedance 90 145 kΩ VO = 0V, RL = 100Ω; +25°C 3
Input Offset Voltage VOS -3 0.5 3 mV VCM = 0V; +25°C; ±4.1 over -40°C to +85°C 3
Average Input Offset Voltage Drift 12 15 µV/°C VCM = 0V 3
Noninverting Input Bias Current IBN -20 5 20 µA VCM = 0V; +25°C; ±31 over -40°C to +85°C 3
Avg Noninverting Input Bias Current Drift -150 100 150 nA/°C VCM = 0V 3
Inverting Input Bias Current IBI -18 2 18 µA VCM = 0V; +25°C; ±38 over -40°C to +85°C 3
Avg Inverting Input Bias Current Drift -200 150 200 nA/°C VCM = 0V 3
Common-mode Input Voltage Range CMIR 2.3 2.5 V ±; +25°C 3
Common-Mode Rejection Ratio CMRR 55 60 dB VCM = 0V; +25°C 3
Output Voltage Swing No Load 3.8 4 V No Load; ±; +25°C 4
Output Voltage Swing RL=100Ω 3.1 3.4 V RL = 100Ω; ±; +25°C 4
Output Current 60 80 mA VO = 0V; ±; +25°C 4
Maximum Operating Voltage Range 6.3 V ± 4
Minimum Operating Voltage Range 3.5 V ± 4
Maximum Quiescent Current IQ 5.8 6 mA VS = ±5V; +25°C 4
Minimum Quiescent Current IQ 5.6 5.8 mA VS = ±5V; +25°C 4
Power-Supply Rejection Ratio PSRR 54 58 dB Input-Referred; +25°C 4
Specified Temperature Range -40 85 °C ID, IDBV 4
Thermal Resistance Junction-to-Ambient θJA 150 °C/W DBV SOT23 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: OPA694IDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa694idbvt-etched.step / opa694idbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa694idbvt.step / opa694idbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 d226036bd324aeb9, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF