main
History Download
Ray Publish 0.1.0 ceaf88b

OPA693IDBVR

Texas Instruments · Video Amplifiers · SOT-23-6

OPA693IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Amplifier output rated for ±120mA output current with a ±4.1V voltage swing at no load.
2 -VS power_in Negative supply pin for ±2.5V to ±6V dual-supply operation, with an absolute maximum power supply of ±6.5VDC.
3 +IN input Noninverting input, driven directly for a gain of +2 with the -IN pin grounded, with a common-mode input range of ±3.4V typical.
4 -IN input Inverting input, grounded for a gain of +2, left open or driven for a gain of +1, and driven for a gain of −1.
5 DIS input Disable control: pulling LOW drops supply current below 170µA and puts the output in a high impedance state, while leaving it open or HIGH gives normal operation.
6 +VS power_in Positive supply pin supporting +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation, with an absolute maximum power supply of ±6.5VDC.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Slew Rate ±5V 2200 2500 V/µs G = +2, 4V Step, VS=±5V, +25°C 3
Small-Signal Bandwidth G=+2 ±5V 510 700 MHz G = +2, VS=±5V, +25°C 3
Gain Error G=+2 ±5V -0.3 0.3 % G = +2, VS=±5V, +25°C 3
Input Offset Voltage ±5V VOS -0.3 0.3 mV VCM = 0V, VS=±5V, +25°C 3
Noninverting Input Bias Current ±5V IBN -35 15 35 µA VCM = 0V, VS=±5V, +25°C 3
Inverting Input Bias Current ±5V IBI -20 20 µA VCM = 0V, VS=±5V, +25°C 3
Common-Mode Input Range ±5V VCM 3.4 V VS=±5V, +25°C 3
Voltage Output Swing No Load ±5V VO 4.1 V No Load, VS=±5V, +25°C 3
Voltage Output Swing 100Ω Load ±5V VO 3.8 V 100Ω Load, VS=±5V, +25°C 3
Output Current Sourcing ±5V IO 120 mA VS=±5V, +25°C 3
Output Current Sinking ±5V IO -120 mA VS=±5V, +25°C 3
Power-Down Supply Current ±5V IS -70 -70 µA VDIS = 0V, VS=±5V, +25°C 4
Enable Voltage ±5V VEN 3.3 V +VS = +5V, +25°C 4
Disable Voltage ±5V VDIS 1.8 V +VS = +5V, +25°C 4
Control Pin Input Bias Current ±5V IDIS 75 µA VDIS = 0V, VS=±5V, +25°C 4
Maximum Operating Voltage Range ±5V VS 6 V VS=±5V, +25°C 4
Max Quiescent Current ±5V IQ 13 13 mA VS = ±5V, +25°C 4
Min Quiescent Current ±5V IQ 13 mA VS = ±5V, +25°C 4
Power-Supply Rejection Ratio (+PSRR) ±5V PSRR 58 dB Input Referred, VS=±5V, +25°C 4
Power Supply Absolute Maximum VS 6.5 VDC 2
Differential Input Voltage VID 1.2 V 2
Storage Temperature Range (DBV) TSTG -65 125 °C 2
Lead Temperature (soldering, 10s) TLEAD 300 °C soldering, 10s 2
Junction Temperature TJ 150 °C 2
ESD Rating Human Body Model 2000 V Human Body Model 2
ESD Rating Charge Device Model 1000 V Charge Device Model 2
ESD Rating Machine Model 100 V Machine Model 2
Specification Operating Temperature DBV -40 85 °C 4
Thermal Resistance θJA DBV SOT23-6 θJA 150 °C/W 4
Specified Operating Voltage ±5V VS 5 V VS=±5V 4
Small-Signal Bandwidth G=+1 ±5V 1400 MHz G = +1, VO < 1.0VPP, VS=±5V 3
Output Impedance ±5V ZO 0.18 Ω G = +2, f = 100kHz, VS=±5V 3

CAD (KiCad official)

  • Symbol: OPA693IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: opa693idbvr-etched.step / opa693idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa693idbvr.step / opa693idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 ac1b9f38053c46b9, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF