OPA691IDBVT

{
  "slug": "opa691idbvt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "opa691idbvt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opa691idbvt.kicad_sym",
    "opa691idbvt.kicad_mod",
    "opa691idbvt.glb",
    "opa691idbvt.step",
    "opa691idbvt.lbr",
    "docs/hero.png",
    "docs/opa691idbvt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "opa691idbvt-hero.glb",
    "opa691idbvt-hero.overlay.json"
  ],
  "component": {
    "mpn": "OPA691IDBVT",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/cn/lit/gpn/opa691",
    "parts": {
      "symbol": "opa691idbvt.kicad_sym",
      "footprint": "opa691idbvt.kicad_mod",
      "model_3d": "opa691idbvt-hero.glb",
      "model_3d_plain": "opa691idbvt.glb",
      "model_3d_step": "opa691idbvt-etched.step",
      "model_3d_step_plain": "opa691idbvt.step",
      "lbr": "opa691idbvt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2058577",
      "digikey": "OPA691IDBVTTR-ND",
      "mouser": "595-OPA691IDBVT"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T16:51:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "OPA691IDBVTTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-OPA691IDBVT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Output",
        "type": "output",
        "description": "Amplifier output; output swing is specified at ±4.0 V typical with no load and at least ±3.8 V (25°C) with no load, and the output goes high impedance when the DIS pin is pulled LOW."
      },
      {
        "number": "2",
        "name": "-VS",
        "type": "power_in",
        "description": "Negative power supply; the device is specified for dual supplies of ±2.5 V to ±6 V with a maximum operating voltage of ±6 V and an absolute maximum power supply of ±6.5 V DC."
      },
      {
        "number": "3",
        "name": "Noninverting Input",
        "type": "input",
        "description": "High-impedance noninverting input with a common-mode input range of ±3.5 V typical (±3.4 V minimum at 25°C), and the absolute maximum differential input voltage is ±1.2 V."
      },
      {
        "number": "4",
        "name": "Inverting Input",
        "type": "input",
        "description": "Inverting input with an open-loop inverting input resistance of 35 Ω typical; the absolute maximum differential input voltage is ±1.2 V."
      },
      {
        "number": "5",
        "name": "DIS",
        "type": "input",
        "description": "Disable control: pulling this pin LOW (below 1.5 V to 1.8 V max disable voltage) drops the supply current below 150 µA and places the output in a high-impedance state, while leaving it open or HIGH gives normal operation."
      },
      {
        "number": "6",
        "name": "+VS",
        "type": "power_in",
        "description": "Positive power supply; the device is specified for dual supplies of ±2.5 V to ±6 V or single supply from +5 V to +12 V, with a maximum operating voltage of ±6 V and an absolute maximum power supply of ±6.5 V DC."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOT-23-6 figure on page 2 is a graphic; the pin labels reach the text layer in a scrambled order; The datasheet text gives no separate per-pin descriptions. Descriptions combine the page 2 pin figur; The datasheet's pin and package tables confirm OPA691IDBVT is the 6-lead SOT-23 (DBV) tape-and-reel "
        ],
        "pages_sent": 8,
        "cost_usd": 0.0532,
        "at": "2026-10-11T16:51:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/opa691",
        "pages": 34,
        "sha256": "f3ed1c5d9d77f59d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "opa691idbvt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "opa691idbvt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d550aaae960c848c51e4db48ca927e769a02d6c9f542f89f9b6dbc5799840f56",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}