main
Ray
opa691idbvr: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
3ea5e41
OPA691IDBVR
Texas Instruments · Operational Amplifier · SOT-23-6
OPA691IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Output terminal providing voltage swing of ±4.0V into no load and ±3.9V into 100Ω load with sourcing/sinking current of 190mA and short-circuit current of 250mA. |
| 2 | -VS | power_in | Negative supply voltage connection supporting ±2V to ±6V dual-supply or ground reference for +5V to +12V single-supply operation with junction temperature rating of +175°C maximum. |
| 3 | Noninverting Input | input | Non-inverting input with common-mode input range of ±3.2V to ±3.5V over -40°C to +85°C, input impedance of 100 |
| 4 | Inverting Input | input | Inverting input with 35Ω open-loop input resistance, bias current of ±5µA to ±40µA, and maximum differential input voltage of ±1.2V. |
| 5 | DIS | input | Disable control input that reduces supply current to ≤150µA and places output in high impedance (70dB isolation at 5MHz) when pulled below 1.8V with 400ns disable time, or enables normal operation when held above 3.3V with 25ns enable time. |
| 6 | +VS | power_in | Positive supply connection for ±2V to ±6V dual-supply or +5V to +12V single-supply operation with quiescent current of 5.1mA typical at ±5V and power-supply rejection ratio of 49dB to 58dB over temperature. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth | 200 | 225 | MHz | VS = ±5V; G = +2, RF = 402Ω | 3 | ||
| Bandwidth for 0.1dB Gain Flatness | 40 | 90 | MHz | VS = ±5V; G = +2, VO = 0.5VPP | 3 | ||
| Peaking at a Gain of +1 | 0.2 | 1 | dB | VS = ±5V; RF = 453Ω, VO = 0.5VPP | 3 | ||
| Slew Rate | 1400 | 2100 | V/µs | VS = ±5V; G = +2, 4V Step | 3 | ||
| 2nd-Harmonic (RL = 100Ω) | -70 | -63 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω | 3 | ||
| Input Voltage Noise | 1.7 | 2.5 | nV/√HZ | VS = ±5V; f > 1MHz | 3 | ||
| Open-Loop Transimpedance Gain (ZOL) | ZOL | 125 | 225 | kΩ | VS = ±5V; VO = 0V, RL = 100Ω | 3 | |
| Input Offset Voltage | -2.5 | 0.5 | 2.5 | mV | VS = ±5V; VCM = 0V | 3 | |
| Average Offset Voltage Drift | -20 | 12 | 20 | µV/°C | VS = ±5V; VCM = 0V | 3 | |
| Noninverting Input Bias Current | 15 | 35 | µA | VS = ±5V; VCM = 0V | 3 | ||
| Average Noninverting Input Bias Current Drift | -300 | -300 | nA/°C | VS = ±5V; VCM = 0V | 3 | ||
| Inverting Input Bias Current | -25 | 5 | 25 | µA | VS = ±5V; VCM = 0V | 3 | |
| Common-Mode Input Range | 3.4 | 3.5 | V | VS = ±5V (table header) | 3 | ||
| Common-Mode Rejection | 52 | 56 | dB | VS = ±5V; VCM = 0V | 3 | ||
| Voltage Output Swing (No Load) | 3.8 | 4 | V | VS = ±5V; No Load | 3 | ||
| Voltage Output Swing (100Ω Load) | 3.7 | 3.9 | V | VS = ±5V; 100Ω Load | 3 | ||
| Current Output, Sourcing | 160 | 190 | mA | VS = ±5V; VO = 0 | 3 | ||
| Current Output, Sinking | -160 | -190 | mA | VS = ±5V; VO = 0 | 3 | ||
| Power-Down Supply Current (+VS) | -150 | -300 | µA | VS = ±5V; VDIS = 0 | 3 | ||
| Enable Voltage | 3.5 | 3.3 | V | VS = ±5V (table header) | 3 | ||
| Disable Voltage | 1.8 | 1.7 | V | VS = ±5V (table header) | 3 | ||
| Control Pin Input Bias Current (DIS) | 75 | 130 | µA | VS = ±5V; VDIS = 0 | 3 | ||
| Maximum Operating Voltage Range | 6 | V | VS = ±5V (table header) | 3 | |||
| Minimum Operating Voltage Range | 2 | V | VS = ±5V (table header) | 3 | |||
| Max Quiescent Current | 5.1 | 5.3 | mA | VS = ±5V | 3 | ||
| Min Quiescent Current | 4.9 | 5.1 | mA | VS = ±5V | 3 | ||
| Power-Supply Rejection Ratio (-PSRR) | 52 | 58 | dB | VS = ±5V; Input Referred | 3 | ||
| Small-Signal Bandwidth | 168 | 190 | MHz | VS = +5V; G = +2, RF = 453Ω | 4 | ||
| Bandwidth for 0.1dB Gain Flatness | 40 | 90 | MHz | VS = +5V; G = +2, VO < 0.5VPP | 4 | ||
| Peaking at a Gain of +1 | 0.2 | 1 | dB | VS = +5V; RF = 649Ω, VO < 0.5VPP | 4 | ||
| Slew Rate | 600 | 850 | V/µs | VS = +5V; G = +2, 2V Step | 4 | ||
| 2nd-Harmonic (RL = 100Ω to VS/2) | -66 | -58 | dBc | VS = +5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω to VS/2 | 4 | ||
| Open-Loop Transimpedance Gain (ZOL) | ZOL | 100 | 200 | kΩ | VS = +5V; VO = VS/2, RL = 100Ω to VS/2 | 4 | |
| Input Offset Voltage | -3 | 0.5 | 3 | mV | VS = +5V; VCM = 2.5V | 4 | |
| Average Offset Voltage Drift | -20 | 12 | 20 | µV/°C | VS = +5V; VCM = 2.5V | 4 | |
| Noninverting Input Bias Current | 20 | 40 | µA | VS = +5V; VCM = 2.5V | 4 | ||
| Average Noninverting Input Bias Current Drift | -250 | -250 | nA/°C | VS = +5V; VCM = 2.5V | 4 | ||
| Inverting Input Bias Current | -20 | 5 | 20 | µA | VS = +5V; VCM = 2.5V | 4 | |
| Least Positive Input Voltage | 1.5 | 1.6 | V | VS = +5V (table header) | 4 | ||
| Most Positive Input Voltage | 3.4 | 3.5 | V | VS = +5V (table header) | 4 | ||
| Common-Mode Rejection Ratio (CMRR) | 50 | 54 | dB | VS = +5V; VCM = VS/2 | 4 | ||
| Most Positive Output Voltage (No Load) | 3.8 | 4 | V | VS = +5V; No Load | 4 | ||
| Most Positive Output Voltage (RL = 100Ω to VS/2) | 3.7 | 3.9 | V | VS = +5V; RL = 100Ω to VS/2 | 4 | ||
| Least Positive Output Voltage (No Load) | 1 | 1.2 | V | VS = +5V; No Load | 4 | ||
| Least Positive Output Voltage (RL = 100Ω to VS/2) | 1.1 | 1.3 | V | VS = +5V; RL = 100Ω to VS/2 | 4 | ||
| Current Output, Sourcing | 120 | 160 | mA | VS = +5V; VO = VS/2 | 4 | ||
| Current Output, Sinking | -120 | -160 | mA | VS = +5V; VO = VS/2 | 4 | ||
| Power-Down Supply Current (+VS) | -150 | -300 | µA | VS = +5V; VDIS = 0 | 4 | ||
| Enable Voltage | 3.5 | 3.3 | V | VS = +5V (table header) | 4 | ||
| Disable Voltage | 1.8 | 1.7 | V | VS = +5V (table header) | 4 | ||
| Max Single-Supply Operating Voltage | 12 | V | VS = +5V (table header) | 4 | |||
| Min Single-Supply Operating Voltage | 4 | V | VS = +5V (table header) | 4 | |||
| Max Quiescent Current | 4.5 | 4.8 | mA | VS = +5V | 4 | ||
| Min Quiescent Current | 4.1 | 4.5 | mA | VS = +5V | 4 | ||
| Power Supply (Absolute Maximum) | -6.5 | 6.5 | VDC | Printed as ±6.5VDC | 2 | ||
| Differential Input Voltage (Absolute Maximum) | -1.2 | 1.2 | V | Printed as ±1.2V | 2 | ||
| Storage Temperature Range (ID, IDBV) | -65 | 125 | °C | ID, IDBV | 2 | ||
| Junction Temperature (TJ) (Absolute Maximum) | TJ | 175 | °C | 2 | |||
| Specified Temperature Range | -40 | 85 | °C | Specification: D, DBV | 3 | ||
| Thermal Resistance, θJA Junction-to-Ambient | θJA | 150 | °C/W | DBV SOT23-6 | 3 |
CAD (KiCad official)
- Symbol:
OPA691IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
opa691idbvr-etched.step/opa691idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa691idbvr.step/opa691idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
f3ed1c5d9d77f59d, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA691IDBVR
**Texas Instruments** · Operational Amplifier · SOT-23-6
OPA691IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Output terminal providing voltage swing of ±4.0V into no load and ±3.9V into 100Ω load with sourcing/sinking current of 190mA and short-circuit current of 250mA. |
| 2 | -VS | power_in | Negative supply voltage connection supporting ±2V to ±6V dual-supply or ground reference for +5V to +12V single-supply operation with junction temperature rating of +175°C maximum. |
| 3 | Noninverting Input | input | Non-inverting input with common-mode input range of ±3.2V to ±3.5V over -40°C to +85°C, input impedance of 100||2kΩ||pF, and bias current of +15µA to +45µA. |
| 4 | Inverting Input | input | Inverting input with 35Ω open-loop input resistance, bias current of ±5µA to ±40µA, and maximum differential input voltage of ±1.2V. |
| 5 | DIS | input | Disable control input that reduces supply current to ≤150µA and places output in high impedance (70dB isolation at 5MHz) when pulled below 1.8V with 400ns disable time, or enables normal operation when held above 3.3V with 25ns enable time. |
| 6 | +VS | power_in | Positive supply connection for ±2V to ±6V dual-supply or +5V to +12V single-supply operation with quiescent current of 5.1mA typical at ±5V and power-supply rejection ratio of 49dB to 58dB over temperature. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth | | 200 | 225 | | MHz | VS = ±5V; G = +2, RF = 402Ω | 3 |
| Bandwidth for 0.1dB Gain Flatness | | 40 | 90 | | MHz | VS = ±5V; G = +2, VO = 0.5VPP | 3 |
| Peaking at a Gain of +1 | | | 0.2 | 1 | dB | VS = ±5V; RF = 453Ω, VO = 0.5VPP | 3 |
| Slew Rate | | 1400 | 2100 | | V/µs | VS = ±5V; G = +2, 4V Step | 3 |
| 2nd-Harmonic (RL = 100Ω) | | | -70 | -63 | dBc | VS = ±5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω | 3 |
| Input Voltage Noise | | | 1.7 | 2.5 | nV/√HZ | VS = ±5V; f > 1MHz | 3 |
| Open-Loop Transimpedance Gain (ZOL) | ZOL | 125 | 225 | | kΩ | VS = ±5V; VO = 0V, RL = 100Ω | 3 |
| Input Offset Voltage | | -2.5 | 0.5 | 2.5 | mV | VS = ±5V; VCM = 0V | 3 |
| Average Offset Voltage Drift | | -20 | 12 | 20 | µV/°C | VS = ±5V; VCM = 0V | 3 |
| Noninverting Input Bias Current | | | 15 | 35 | µA | VS = ±5V; VCM = 0V | 3 |
| Average Noninverting Input Bias Current Drift | | | -300 | -300 | nA/°C | VS = ±5V; VCM = 0V | 3 |
| Inverting Input Bias Current | | -25 | 5 | 25 | µA | VS = ±5V; VCM = 0V | 3 |
| Common-Mode Input Range | | 3.4 | 3.5 | | V | VS = ±5V (table header) | 3 |
| Common-Mode Rejection | | 52 | 56 | | dB | VS = ±5V; VCM = 0V | 3 |
| Voltage Output Swing (No Load) | | 3.8 | 4 | | V | VS = ±5V; No Load | 3 |
| Voltage Output Swing (100Ω Load) | | 3.7 | 3.9 | | V | VS = ±5V; 100Ω Load | 3 |
| Current Output, Sourcing | | 160 | 190 | | mA | VS = ±5V; VO = 0 | 3 |
| Current Output, Sinking | | -160 | -190 | | mA | VS = ±5V; VO = 0 | 3 |
| Power-Down Supply Current (+VS) | | | -150 | -300 | µA | VS = ±5V; VDIS = 0 | 3 |
| Enable Voltage | | 3.5 | 3.3 | | V | VS = ±5V (table header) | 3 |
| Disable Voltage | | | 1.8 | 1.7 | V | VS = ±5V (table header) | 3 |
| Control Pin Input Bias Current (DIS) | | | 75 | 130 | µA | VS = ±5V; VDIS = 0 | 3 |
| Maximum Operating Voltage Range | | | | 6 | V | VS = ±5V (table header) | 3 |
| Minimum Operating Voltage Range | | 2 | | | V | VS = ±5V (table header) | 3 |
| Max Quiescent Current | | | 5.1 | 5.3 | mA | VS = ±5V | 3 |
| Min Quiescent Current | | 4.9 | 5.1 | | mA | VS = ±5V | 3 |
| Power-Supply Rejection Ratio (-PSRR) | | 52 | 58 | | dB | VS = ±5V; Input Referred | 3 |
| Small-Signal Bandwidth | | 168 | 190 | | MHz | VS = +5V; G = +2, RF = 453Ω | 4 |
| Bandwidth for 0.1dB Gain Flatness | | 40 | 90 | | MHz | VS = +5V; G = +2, VO < 0.5VPP | 4 |
| Peaking at a Gain of +1 | | | 0.2 | 1 | dB | VS = +5V; RF = 649Ω, VO < 0.5VPP | 4 |
| Slew Rate | | 600 | 850 | | V/µs | VS = +5V; G = +2, 2V Step | 4 |
| 2nd-Harmonic (RL = 100Ω to VS/2) | | | -66 | -58 | dBc | VS = +5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω to VS/2 | 4 |
| Open-Loop Transimpedance Gain (ZOL) | ZOL | 100 | 200 | | kΩ | VS = +5V; VO = VS/2, RL = 100Ω to VS/2 | 4 |
| Input Offset Voltage | | -3 | 0.5 | 3 | mV | VS = +5V; VCM = 2.5V | 4 |
| Average Offset Voltage Drift | | -20 | 12 | 20 | µV/°C | VS = +5V; VCM = 2.5V | 4 |
| Noninverting Input Bias Current | | | 20 | 40 | µA | VS = +5V; VCM = 2.5V | 4 |
| Average Noninverting Input Bias Current Drift | | | -250 | -250 | nA/°C | VS = +5V; VCM = 2.5V | 4 |
| Inverting Input Bias Current | | -20 | 5 | 20 | µA | VS = +5V; VCM = 2.5V | 4 |
| Least Positive Input Voltage | | | 1.5 | 1.6 | V | VS = +5V (table header) | 4 |
| Most Positive Input Voltage | | 3.4 | 3.5 | | V | VS = +5V (table header) | 4 |
| Common-Mode Rejection Ratio (CMRR) | | 50 | 54 | | dB | VS = +5V; VCM = VS/2 | 4 |
| Most Positive Output Voltage (No Load) | | 3.8 | 4 | | V | VS = +5V; No Load | 4 |
| Most Positive Output Voltage (RL = 100Ω to VS/2) | | 3.7 | 3.9 | | V | VS = +5V; RL = 100Ω to VS/2 | 4 |
| Least Positive Output Voltage (No Load) | | | 1 | 1.2 | V | VS = +5V; No Load | 4 |
| Least Positive Output Voltage (RL = 100Ω to VS/2) | | | 1.1 | 1.3 | V | VS = +5V; RL = 100Ω to VS/2 | 4 |
| Current Output, Sourcing | | 120 | 160 | | mA | VS = +5V; VO = VS/2 | 4 |
| Current Output, Sinking | | -120 | -160 | | mA | VS = +5V; VO = VS/2 | 4 |
| Power-Down Supply Current (+VS) | | | -150 | -300 | µA | VS = +5V; VDIS = 0 | 4 |
| Enable Voltage | | 3.5 | 3.3 | | V | VS = +5V (table header) | 4 |
| Disable Voltage | | | 1.8 | 1.7 | V | VS = +5V (table header) | 4 |
| Max Single-Supply Operating Voltage | | | | 12 | V | VS = +5V (table header) | 4 |
| Min Single-Supply Operating Voltage | | 4 | | | V | VS = +5V (table header) | 4 |
| Max Quiescent Current | | | 4.5 | 4.8 | mA | VS = +5V | 4 |
| Min Quiescent Current | | 4.1 | 4.5 | | mA | VS = +5V | 4 |
| Power Supply (Absolute Maximum) | | -6.5 | | 6.5 | VDC | Printed as ±6.5VDC | 2 |
| Differential Input Voltage (Absolute Maximum) | | -1.2 | | 1.2 | V | Printed as ±1.2V | 2 |
| Storage Temperature Range (ID, IDBV) | | -65 | | 125 | °C | ID, IDBV | 2 |
| Junction Temperature (TJ) (Absolute Maximum) | TJ | | | 175 | °C | | 2 |
| Specified Temperature Range | | -40 | | 85 | °C | Specification: D, DBV | 3 |
| Thermal Resistance, θJA Junction-to-Ambient | θJA | | 150 | | °C/W | DBV SOT23-6 | 3 |
## CAD (KiCad official)
- Symbol: `OPA691IDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `opa691idbvr-etched.step` / `opa691idbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa691idbvr.step` / `opa691idbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa691) (34 pp, sha256 `f3ed1c5d9d77f59d`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa691idbvr-datasheet.pdf)