← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# OPA615ID++**Texas Instruments** · Video Amplifiers · SOIC-14++OPA615ID from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connection internally. |+| 2 | +VCC | power_in | Positive power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V. |+| 3 | IOUT, Collector (C) | output | OTA collector current output; ±20mA output current capability, ±3.5V output compliance range. |+| 4 | S/H In− | input | Sampling comparator negative (inverting) input; ±3.0V input voltage range, 200kΩ input impedance. |+| 5 | S/H In+ | input | Sampling comparator positive (non-inverting) input; ±3.0V input voltage range, 200kΩ input impedance. |+| 6 | Ground (GND) | power_in | Power supply and signal ground reference. |+| 7 | NC | unconnected | No connection internally. |+| 8 | IQ Adjust | passive | External resistor connection for OTA quiescent current adjustment; connect RQ = 300Ω to −VCC to set IQ = 13mA nominal. |+| 9 | Emitter (E) | output | OTA emitter low-impedance output; ±20mA output current capability, can accept degeneration resistor RE to ground. |+| 10 | Base (B) | input | OTA base high-impedance input; ±3.4V input voltage range, ±0.5μA input bias current, 7MΩ input impedance. |+| 11 | CHOLD | passive | Hold capacitor connection node; high-impedance external capacitor connection for DC restoration charge storage. |+| 12 | −VCC | power_in | Negative power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V. |+| 13 | NC | unconnected | No connection internally. |+| 14 | Hold Control | input | TTL/CMOS compatible sample/hold control input; 2.5ns propagation delay, logic high enables tracking mode, logic low enables hold mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14 |+| Category | Amplifiers/Comparators |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `OPA615ID`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `opa615id-etched.step` / `opa615id-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa615id.step` / `opa615id.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa615.pdf) (36 pp, sha256 `693b1cbe4efc708d`, retrieved 2026-09-29, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opa615id-datasheet.pdf)
page.jsonadded+179@@ -0,0 +1,179 @@+{+ "slug": "opa615id",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Video Amplifiers, SOIC-14. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "opa615id",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "opa615id.kicad_sym",+ "opa615id.kicad_mod",+ "opa615id.glb",+ "opa615id.step",+ "opa615id.lbr",+ "docs/hero.png",+ "docs/opa615id-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "OPA615ID",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Amplifiers/Comparators",+ "subcategory": "Video Amplifiers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/opa615.pdf",+ "parts": {+ "symbol": "opa615id.kicad_sym",+ "footprint": "opa615id.kicad_mod",+ "model_3d": "opa615id-etched.glb",+ "model_3d_plain": "opa615id.glb",+ "model_3d_step": "opa615id-etched.step",+ "model_3d_step_plain": "opa615id.step",+ "lbr": "opa615id.lbr"+ },+ "distributor_links": {+ "lcsc": "C2878567",+ "digikey": "2156-OPA615ID-ND",+ "mouser": "595-OPA615ID"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T23:31:49Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "2156-OPA615ID-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-OPA615ID",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection internally."+ },+ {+ "number": "2",+ "name": "+VCC",+ "type": "power_in",+ "description": "Positive power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V."+ },+ {+ "number": "3",+ "name": "IOUT, Collector (C)",+ "type": "output",+ "description": "OTA collector current output; ±20mA output current capability, ±3.5V output compliance range."+ },+ {+ "number": "4",+ "name": "S/H In−",+ "type": "input",+ "description": "Sampling comparator negative (inverting) input; ±3.0V input voltage range, 200kΩ input impedance."+ },+ {+ "number": "5",+ "name": "S/H In+",+ "type": "input",+ "description": "Sampling comparator positive (non-inverting) input; ±3.0V input voltage range, 200kΩ input impedance."+ },+ {+ "number": "6",+ "name": "Ground (GND)",+ "type": "power_in",+ "description": "Power supply and signal ground reference."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection internally."+ },+ {+ "number": "8",+ "name": "IQ Adjust",+ "type": "passive",+ "description": "External resistor connection for OTA quiescent current adjustment; connect RQ = 300Ω to −VCC to set IQ = 13mA nominal."+ },+ {+ "number": "9",+ "name": "Emitter (E)",+ "type": "output",+ "description": "OTA emitter low-impedance output; ±20mA output current capability, can accept degeneration resistor RE to ground."+ },+ {+ "number": "10",+ "name": "Base (B)",+ "type": "input",+ "description": "OTA base high-impedance input; ±3.4V input voltage range, ±0.5μA input bias current, 7MΩ input impedance."+ },+ {+ "number": "11",+ "name": "CHOLD",+ "type": "passive",+ "description": "Hold capacitor connection node; high-impedance external capacitor connection for DC restoration charge storage."+ },+ {+ "number": "12",+ "name": "−VCC",+ "type": "power_in",+ "description": "Negative power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection internally."+ },+ {+ "number": "14",+ "name": "Hold Control",+ "type": "input",+ "description": "TTL/CMOS compatible sample/hold control input; 2.5ns propagation delay, logic high enables tracking mode, logic low enables hold mode."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/opa615.pdf",+ "pages": 36,+ "sha256": "693b1cbe4efc708d",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}