component
OPA615ID
Public Made by Adomby adom
Texas Instruments Video Amplifiers, SOIC-14. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA615ID
Texas Instruments · Video Amplifiers · SOIC-14
OPA615ID from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection internally. |
| 2 | +VCC | power_in | Positive power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V. |
| 3 | IOUT, Collector (C) | output | OTA collector current output; ±20mA output current capability, ±3.5V output compliance range. |
| 4 | S/H In− | input | Sampling comparator negative (inverting) input; ±3.0V input voltage range, 200kΩ input impedance. |
| 5 | S/H In+ | input | Sampling comparator positive (non-inverting) input; ±3.0V input voltage range, 200kΩ input impedance. |
| 6 | Ground (GND) | power_in | Power supply and signal ground reference. |
| 7 | NC | unconnected | No connection internally. |
| 8 | IQ Adjust | passive | External resistor connection for OTA quiescent current adjustment; connect RQ = 300Ω to −VCC to set IQ = 13mA nominal. |
| 9 | Emitter (E) | output | OTA emitter low-impedance output; ±20mA output current capability, can accept degeneration resistor RE to ground. |
| 10 | Base (B) | input | OTA base high-impedance input; ±3.4V input voltage range, ±0.5μA input bias current, 7MΩ input impedance. |
| 11 | CHOLD | passive | Hold capacitor connection node; high-impedance external capacitor connection for DC restoration charge storage. |
| 12 | −VCC | power_in | Negative power supply rail; ±5V nominal, operating range ±4V to ±6.2V absolute maximum ±6.5V. |
| 13 | NC | unconnected | No connection internally. |
| 14 | Hold Control | input | TTL/CMOS compatible sample/hold control input; 2.5ns propagation delay, logic high enables tracking mode, logic low enables hold mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
OPA615ID - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
opa615id-etched.step/opa615id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa615id.step/opa615id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
693b1cbe4efc708d, retrieved 2026-09-29, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).