component

opa551ua

Public Made by Adom

by adom

Texas Instruments Operational Amplifier, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmpopa551ua
Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

OPA551UA

Texas Instruments · Operational Amplifier · SOIC-8

OPA551UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V- power_in Negative (lowest) power supply. Operating supply range ±4 V to ±30 V (8 V to 60 V between rails). Pins 1, 4, and 5 are internally connected for improved thermal performance; pin 4 must carry the primary V- supply current, pins 1 and 5 should be connected to a thermal mass rather than used as feedthroughs to V-.
2 -IN input Inverting op-amp input. Common-mode range (V-)+2.5 V to (V+)-2.5 V; input bias current ±20 pA typ (±100 pA max). Internal clamp diodes protect against voltages beyond the rails; external input current must be limited to 5 mA.
3 +IN input Noninverting op-amp input. Common-mode range (V-)+2.5 V to (V+)-2.5 V; input bias current ±20 pA typ. Internal clamp diodes protect against voltages beyond the rails; external input current must be limited to 5 mA.
4 V- power_in Negative (lowest) power supply - primary current carrier for V-. Operating supply range ±4 V to ±30 V (8 V to 60 V total between rails). Bypass with 0.1 µF (and 10 µF) capacitor near the pin.
5 V- power_in Negative (lowest) power supply. Internally tied to pins 1 and 4 for improved thermal performance. Should be connected to a thermal mass rather than used as a PCB feedthrough for V-.
6 Out output Amplifier output. Swings to within ~2 V of the rails at 10 mA and ~3 V of the rails at 200 mA. Continuous output current up to ±200 mA; short-circuit current limited to approximately ±380 mA. Stable driving capacitive loads (see Figure 19 for allowed CL vs. gain).
7 V+ power_in Positive (highest) power supply. Operating supply range ±4 V to ±30 V (8 V to 60 V total between rails). Quiescent current ±7 mA typ (±8.5 mA max). Bypass with 0.1 µF (and 10 µF) capacitor near the pin.
8 Flag output Thermal-shutdown indicator (current-source output). Sources ~50 nA (1 µA max) during normal operation and 80-160 µA (120 µA typ) when the die exceeds ~160 °C and enters thermal shutdown (resets at ~140 °C). Compliance range V- to (V+)-1.5 V; an external pull-down resistor converts the current to a logic-level signal.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • OPA551UA
  • OPA551UA/2K5
  • OPA551UAE4
  • OPA551UAPAG4
  • OPA551UAFA/500
  • OPA551UAFA/500G3
  • OPA551UAFAKTWT
  • OPA551UAFAKTWTG3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -3 1 3 mV VCM = 0 V, IO = 0 mA 5
Input offset voltage over temperature VOS -5 5 mV TJ = –40°C to 125°C 5
Input offset voltage vs power supply (PSRR) PSRR 10 30 µV/V VS = ±4 V to ±30 V, VCM = 0 V 5
Input bias current IB -100 20 100 pA 5
Input offset current IOS -100 3 100 pA 5
Common-mode rejection ratio CMRR 92 102 dB –27.5 V < VCM < +27.5 V 5
Open-loop voltage gain AOL 110 126 dB RL = 3 kΩ, –28 V < VO < +28 V 5
Open-loop voltage gain over temperature AOL 100 dB RL = 3 kΩ, –28 V < VO < +28 V, TJ = –40°C to 125°C 5
Maximum continuous output current IO -200 200 mA DC 6
Thermal shutdown status output, normal operation (sourcing) 0.05 1 µA Normal operation, sourcing 6
Thermal shutdown status output, thermal shutdown (sourcing) 80 120 160 µA Thermal shutdown, sourcing 6
Operating voltage range (per supply, ±) 4 30 V 6
Quiescent current IQ 7 8.5 mA IO = 0 mA 6
Quiescent current over temperature IQ 10 mA TJ = –40°C to 125°C 6
Specified temperature range (electrical) TJ -40 125 °C 6
Operating temperature range (electrical) TJ -55 125 °C 6
Supply voltage VS (recommended) VS 8 60 V 4
Specified temperature (recommended) -40 125 °C 4
Supply voltage VS = (V+) to (V–) VS 60 V 4
Operating temperature TA -55 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human-body model (HBM) V(ESD) -3000 3000 V ANSI/ESDA/JEDEC JS-001 4
Junction-to-ambient thermal resistance RθJA 96.7 °C/W SOIC (D) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 38.7 °C/W SOIC (D) 8-pin package 4
Junction-to-board thermal resistance RθJB 38.2 °C/W SOIC (D) 8-pin package 4

CAD (KiCad official)

  • Symbol: OPA551UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa551ua-etched.step / opa551ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa551ua.step / opa551ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 bc4b2856546ba466, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF