3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA548FKTWT
Texas Instruments · Operational Amplifier · TO-263-7
OPA548FKTWT from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Noninverting input with common-mode voltage range (V-) - 0.1 V to (V+) - 3 V and input bias current -100 to -500 nA. |
| 2 | VIN- | power_in | Inverting input with common-mode voltage range (V-) - 0.1 V to (V+) - 3 V and input bias current -100 to -500 nA. |
| 3 | ILIM | input | Current limit control input setting output current from 0 A to 5 A via equation ILIM = (15000)(4.75) / (13750 Ω + RCL) using external resistor or DAC. |
| 4 | V- | power_in | Negative power supply with operating voltage range 8 V to 60 V (±4 V to ±30 V dual-supply) and quiescent current ±17 mA to ±20 mA typical. |
| 5 | V+ | power_in | Positive power supply with operating voltage range 8 V to 60 V (±4 V to ±30 V dual-supply). |
| 6 | VO | output | High-current output with maximum continuous current ±3 A DC or 3 Arms AC and output voltage limited by supply and load current. |
| 7 | E/S | bidirectional | Enable/status pin disabling output when pulled below (V-) + 0.8 V and indicating thermal shutdown status when monitored, with 1 µs disable time and 3 µs enable time. |
| 8 | TAB | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | -10 | 2 | 10 | mV | VCM = 0 V, IO = 0 A | 5 | |
| Input offset voltage drift | -30 | 30 | µV/°C | VCM = 0 V, IO = 0 A, TA = –40°C to +85°C | 5 | ||
| Power-supply rejection ratio | 30 | 100 | µV/V | VCM = 0 V, IO = 0 A, VS = ±4 V to ±30 V | 5 | ||
| Input bias current | -100 | -500 | nA | VCM = 0 V | 5 | ||
| Input bias current drift | -0.5 | 0.5 | nA/°C | VCM = 0 V, TA = –40°C to +85°C | 5 | ||
| Input offset current | -50 | 5 | 50 | nA | VCM = 0 V | 5 | |
| Common-mode voltage, positive (relative to V+) | -3 | -2.3 | V | Linear operation | 5 | ||
| Common-mode voltage, negative (relative to V–) | -0.1 | -0.2 | V | Linear operation | 5 | ||
| Common-mode rejection | 80 | 95 | dB | VCM = (V–) – 0.1 V to (V+) – 3 V | 5 | ||
| Open-loop voltage gain | 90 | 98 | dB | VO = ±25 V, RL = 1 kΩ | 5 | ||
| Output voltage positive, relative to V+ | -4.1 | -3.7 | V | IO = 3 A | 5 | ||
| Output voltage negative, relative to V– | 3.7 | 3.3 | V | IO = –3 A | 5 | ||
| Output voltage positive, relative to V+ | -2.4 | -2.1 | V | IO = 0.6 A | 5 | ||
| Output voltage negative, relative to V– | 1.3 | 1 | V | IO = –0.6 A | 5 | ||
| Maximum continuous current output (DC) | -3 | 3 | A | DC | 5 | ||
| Maximum continuous current output (AC) | 3 | Arms | AC | 5 | |||
| Output current limit | -5 | 5 | A | 5 | |||
| Output current limit tolerance | -250 | 100 | 250 | mA | RCL = 14.8 kΩ (ILIM = ±2.5 A), RL = 8 Ω | 5 | |
| E/S pin input high voltage (output enabled), relative to V– | VE/S | 2.4 | V | E/S pin open or forced high | 6 | ||
| E/S pin input low voltage (output disabled), relative to V– | VE/S | 0.8 | V | E/S pin forced low | 6 | ||
| Thermal shutdown status output high, relative to V– | 2.4 | 3.5 | V | Normal operation, sourcing 20 µA | 6 | ||
| Thermal shutdown status output low, relative to V– | 0.35 | 0.8 | V | Thermally shut down, sinking 5 µA, TJ > 160°C | 6 | ||
| Quiescent current | -20 | 17 | 20 | mA | ILIM connected to V–, IO = 0 A | 6 | |
| Quiescent current, shutdown mode | -6 | 6 | mA | ILIM connected to V–, IO = 0 A | 6 | ||
| Supply voltage (V+ – V–) | 8 | 60 | V | Dual-supply values printed in parentheses: ±4 V min, ±30 V max | 4 | ||
| Specified temperature | -40 | 125 | °C | 4 | |||
| Supply voltage, V+ to V– | 60 | V | 4 | ||||
| Input voltage (min relative to V–, max relative to V+) | -0.5 | 0.5 | V | 4 | |||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -55 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 30.2 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 37.4 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 | ||
| Junction-to-board thermal resistance | RθJB | 14.4 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 | ||
| Junction-to-top characterization parameter | ψJT | 5.1 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 | ||
| Junction-to-board characterization parameter | ψJB | 14.3 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.2 | °C/W | KTW (DDPAK/TO-263, 7 pins) column | 4 |
CAD (KiCad official)
- Symbol:
OPA548FKTWT - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
opa548fktwt-etched.step/opa548fktwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa548fktwt.step/opa548fktwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
f749c1174a0f6c89, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).