Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA4388IPWR

Texas Instruments · Precision Op Amps · TSSOP-14

OPA4388IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Op-amp output, channel A. Rail-to-rail output stage, swings within a few mV of V+ and V-.
2 -IN A input Inverting input, channel A. True rail-to-rail input, common-mode range V- to V+.
3 +IN A input Noninverting input, channel A. True rail-to-rail input, common-mode range V- to V+.
4 V+ power_in Positive (highest) power supply. Single-supply 2.5 V to 5.5 V, or dual-supply ±1.25 V to ±2.75 V. Absolute max VS = (V+) - (V-) = 6 V.
5 +IN B input Noninverting input, channel B. True rail-to-rail input.
6 -IN B input Inverting input, channel B. True rail-to-rail input.
7 OUT B output Op-amp output, channel B. Rail-to-rail output stage.
8 OUT C output Op-amp output, channel C. Rail-to-rail output stage.
9 -IN C input Inverting input, channel C. True rail-to-rail input.
10 +IN C input Noninverting input, channel C. True rail-to-rail input.
11 V- power_in Negative (lowest) power supply. Tie to GND for single-supply operation, or to a negative rail for dual-supply operation (±1.25 V to ±2.75 V).
12 +IN D input Noninverting input, channel D. True rail-to-rail input.
13 -IN D input Inverting input, channel D. True rail-to-rail input.
14 OUT D output Op-amp output, channel D. Rail-to-rail output stage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • OPA4388IPWR
  • OPA4388IPWRIDR
  • OPA4388IPWRID

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, single-supply VS 6 V VS = (V+) – (V–), single-supply 6
Supply voltage, dual-supply VS 3 V VS = (V+) – (V–), dual-supply (printed ±3) 6
Signal input pins current -10 10 mA Signal input pins (printed ±10 mA) 6
Operating temperature TA -55 150 °C Operating, free-air 6
Junction temperature TJ 150 °C Junction 6
Storage temperature Tstg -65 150 °C Storage 6
Supply voltage, single-supply VS 2.5 5.5 V Single-supply 6
Supply voltage, dual-supply VS 1.25 2.75 V Dual-supply (printed ±1.25 / ±2.75 V) 6
Specified temperature TA -40 125 °C Specified temperature 6
Input offset voltage (OPA4388) VOS -8 2.25 8 µV VS = 5.5 V, TA = 25°C 7
Input offset voltage over temperature (OPA4388) VOS -10.5 10.5 µV TA = –40°C to +125°C, VS = 5.5 V 7
Input offset voltage drift (OPA4388) dVOS/dT -0.05 0.005 0.05 µV/°C TA = –40°C to +125°C, VS = 5.5 V 7
Power-supply rejection ratio (OPA4388) PSRR -3.5 1.25 3.5 µV/V TA = –40°C to +125°C 7
Input bias current (OPA4388) IB -500 30 500 pA RIN = 100 kΩ 8
Input bias current (OPA4388) IB -600 600 pA RIN = 100 kΩ, TA = 0°C to +85°C 8
Input bias current (OPA4388) IB -800 800 pA RIN = 100 kΩ, TA = –40°C to +125°C 8
Input offset current (OPA4388) IOS -1000 1000 pA RIN = 100 kΩ 8
Input offset current (OPA4388) IOS -1100 1100 pA RIN = 100 kΩ, TA = 0°C to +85°C 8
Common-mode rejection ratio CMRR 102 110 dB (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±1.25 V 8
Common-mode rejection ratio CMRR 124 140 dB (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±2.75 V 8
Common-mode rejection ratio over temperature CMRR 102 107 dB (V–) < VCM < (V+) + 0.1 V, TA = –40°C to +125°C, VS = ±1.25 V 8
Common-mode rejection ratio over temperature CMRR 124 140 dB (V–) – 0.05 V < VCM < (V+) + 0.1 V, TA = –40°C to +125°C, VS = ±2.75 V 8
Open-loop voltage gain AOL 126 148 dB (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ 9
Open-loop voltage gain over temperature (OPA4388) AOL 120 126 dB (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ, VS = 5.5 V, TA = –40°C to +125°C 9
Voltage output swing from positive rail, no load VO 1 15 mV No load 9
Voltage output swing from positive rail VO 5 20 mV RLOAD = 10 kΩ 9
Voltage output swing from positive rail VO 20 50 mV RLOAD = 2 kΩ 9
Voltage output swing from negative rail, no load VO 5 15 mV No load 9
Voltage output swing from negative rail VO 10 20 mV RLOAD = 10 kΩ 9
Voltage output swing from negative rail VO 40 60 mV RLOAD = 2 kΩ 9
Voltage output swing from both rails VO 10 25 mV TA = –40°C to +125°C, both rails, RLOAD = 10 kΩ 9
Short-circuit current ISC -60 60 mA VS = 5.5 V 9
Short-circuit current ISC -30 30 mA VS = 2.5 V 9
Quiescent current per amplifier IQ 1.7 2.4 mA VS = ±1.25 V (VS = 2.5 V), IO = 0 A 9
Quiescent current per amplifier over temperature IQ 1.7 2.4 mA TA = –40°C to +125°C, IO = 0 A 9
Quiescent current per amplifier IQ 1.9 2.6 mA VS = ±2.75 V (VS = 5.5 V), IO = 0 A 9
Quiescent current per amplifier over temperature IQ 1.9 2.6 mA TA = –40°C to +125°C, IO = 0 A 9
Unity-gain bandwidth GBW 10 MHz 9
Slew rate SR 5 V/µs G = 1, 4-V step 9
Input voltage noise EN 0.14 µVPP f = 0.1 Hz to 10 Hz 8
Input voltage noise density eN 7 nV/√Hz f = 1 kHz 8
Input current noise density IN 100 fA/√Hz f = 1 kHz 8
Open-loop output impedance ZO 100 Ω f = 1 MHz, IO = 0 A 9
Junction-to-ambient thermal resistance (PW, TSSOP-14) RθJA 109.6 °C/W 7
Junction-to-case (top) thermal resistance (PW, TSSOP-14) RθJC(top) 27.4 °C/W 7
Junction-to-board thermal resistance (PW, TSSOP-14) RθJB 56.1 °C/W 7
Junction-to-top characterization parameter (PW, TSSOP-14) ΨJT 1.5 °C/W 7
Junction-to-board characterization parameter (PW, TSSOP-14) ΨJB 54.9 °C/W 7

CAD (KiCad official)

  • Symbol: OPA4388IPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: opa4388ipwr-etched.step / opa4388ipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa4388ipwr.step / opa4388ipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 ce8a6402ccdd24db, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF