main
History Download
Ray Publish 0.1.0 4a28176

OPA4379AIPWR

Texas Instruments · Operational Amplifier · TSSOP-14

OPA4379AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, rail-to-rail with short-circuit current of ±5 mA typical (one amplifier shorted per package).
2 -IN A input Amplifier A inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
3 +IN A input Amplifier A non-inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
4 V+ power_in Positive supply, 1.8V to 5.5V total supply (absolute maximum 7V), bypass with 0.1µF capacitor close to the supply pins.
5 +IN B input Amplifier B non-inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
6 -IN B input Amplifier B inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
7 OUT B output Amplifier B output, rail-to-rail with short-circuit current of ±5 mA typical.
8 OUT C output Amplifier C output, rail-to-rail with short-circuit current of ±5 mA typical.
9 -IN C input Amplifier C inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
10 +IN C input Amplifier C non-inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
11 V- power_in Negative supply or ground in single-supply operation, with 1.8V to 5.5V total supply span (absolute maximum 7V).
12 +IN D input Amplifier D non-inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
13 -IN D input Amplifier D inverting input, common-mode range (V-) - 0.1V to (V+) + 0.1V, input current limited to 10 mA.
14 OUT D output Amplifier D output, rail-to-rail with short-circuit current of ±5 mA typical.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial Offset Voltage (VS = 5V) VOS 0.4 1.5 mV VS = 5V 4
Offset Voltage over temperature 2 mV Over -40°C to +125°C 4
Offset Voltage Drift dVOS/dT 1.5 µV/°C Drift, -40°C to +85°C 4
Offset Voltage Drift 2.7 µV/°C Drift, -40°C to +125°C 4
Power Supply Rejection Ratio PSRR 2 10 µV/V 4
Power Supply Rejection Ratio over temperature 20 µV/V Over -40°C to +125°C 4
Common-Mode Rejection Ratio CMRR 90 100 dB (V-) < VCM < (V+), 1V 4
Common-Mode Rejection Ratio over temperature CMRR 80 dB Over -40°C to +85°C (V-) < VCM < (V+), 1V 4
Common-Mode Rejection Ratio over temperature CMRR 62 dB Over -40°C to +125°C (V-) < VCM < (V+), 1V 4
Input Bias Current IB -50 5 50 pA VS = 5V, VCM ≤ VS/2 4
Input Offset Current IOS -50 5 50 pA VS = 5V 4
Open-Loop Voltage Gain AOL 100 120 dB VS = 5V, RL = 25kΩ, 100mV < VO < (V+), 100mV 4
Open-Loop Voltage Gain over temperature 80 dB Over -40°C to +125°C VS = 5V, RL = 25kΩ, 100mV < VO < (V+), 100mV 4
Voltage Output Swing from Rail 5 10 mV RL = 25kΩ 4
Voltage Output Swing from Rail over temperature 15 mV Over -40°C to +125°C RL = 25kΩ 4
Voltage Output Swing from Rail 25 50 mV RL = 5kΩ 4
Voltage Output Swing from Rail over temperature 75 mV Over -40°C to +125°C RL = 5kΩ 4
Specified/Operating Voltage Range VS 1.8 5.5 V 5
Quiescent Current per Amplifier IQ 2.9 5.5 µA VS = 5.5V, IO = 0 5
Quiescent Current per Amplifier over temperature 10 µA Over -40°C to +125°C 5
Specified/Operating Range TA -40 125 °C 5
Storage Range TJ -65 150 °C 5
Supply Voltage VS 7 V VS = (V+), (V-) 2
Signal Input Terminals, Current -10 10 mA 2
Operating Temperature TA -40 125 °C 2
Storage Temperature TA -65 150 °C 2
Junction Temperature TJ 150 °C 2
Thermal Resistance, junction-to-ambient θJA 150 °C/W TSSOP-14 (shared row with SOT23-8, SO-8) 5

CAD (KiCad official)

  • Symbol: OPA4379AIPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: opa4379aipwr-etched.step / opa4379aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa4379aipwr.step / opa4379aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 d07bd974536d40da, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF