main
Ray
Publish 0.1.0
975a90b
OPA4350UA
Texas Instruments · Operational Amplifier · SOIC-14
OPA4350UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of channel A, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 2 | -In A | input | Inverting input of channel A; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 3 | +In A | input | Noninverting input of channel A; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 4 | V+ | power_in | Positive power supply, with a recommended operating range of 2.7 V to 5.5 V (V+ to V−) and an absolute maximum supply voltage of 7 V. |
| 5 | +In B | input | Noninverting input of channel B; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 6 | -In B | input | Inverting input of channel B; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 7 | Out B | output | Output of channel B, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 8 | Out C | output | Output of channel C, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 9 | -In C | input | Inverting input of channel C; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 10 | +In C | input | Noninverting input of channel C; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 11 | V- | power_in | Negative power supply, which is ground in single-supply operation; the absolute maximum supply voltage is 7 V. |
| 12 | +In D | input | Noninverting input of channel D; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 13 | -In D | input | Inverting input of channel D; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 14 | Out D | output | Output of channel D, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
OPA4350UA - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
opa4350ua-etched.step/opa4350ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa4350ua.step/opa4350ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
185293ca6674dd18, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA4350UA
**Texas Instruments** · Operational Amplifier · SOIC-14
OPA4350UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of channel A, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 2 | -In A | input | Inverting input of channel A; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 3 | +In A | input | Noninverting input of channel A; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 4 | V+ | power_in | Positive power supply, with a recommended operating range of 2.7 V to 5.5 V (V+ to V−) and an absolute maximum supply voltage of 7 V. |
| 5 | +In B | input | Noninverting input of channel B; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 6 | -In B | input | Inverting input of channel B; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 7 | Out B | output | Output of channel B, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 8 | Out C | output | Output of channel C, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
| 9 | -In C | input | Inverting input of channel C; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 10 | +In C | input | Noninverting input of channel C; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 11 | V- | power_in | Negative power supply, which is ground in single-supply operation; the absolute maximum supply voltage is 7 V. |
| 12 | +In D | input | Noninverting input of channel D; the common-mode range extends 300 mV below ground and 300 mV above V+. |
| 13 | -In D | input | Inverting input of channel D; input terminals are diode-clamped to the supply rails and signals beyond 0.3 V outside the rails should be current-limited to 10 mA or less. |
| 14 | Out D | output | Output of channel D, which swings to within 10 mV of the supply rails with a 10-kΩ load. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
## CAD (KiCad official)
- Symbol: `OPA4350UA`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `opa4350ua-etched.step` / `opa4350ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa4350ua.step` / `opa4350ua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa4350.pdf) (44 pp, sha256 `185293ca6674dd18`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa4350ua-datasheet.pdf)