d770bb2
OPA391DCKR
Texas Instruments · Operational Amplifier · SC-70-5
OPA391DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Noninverting input of the operational amplifier. Common-mode input range extends 100mV beyond each supply rail; VCM = (V-)-0.1V to (V+)+0.1V. |
| 2 | V- | power_in | Negative (lowest) power supply. Single-supply operation 1.7V to 5.5V referenced from V+ to V-; dual-supply ±0.85V to ±2.75V. Absolute max supply voltage 6V. |
| 3 | -IN | input | Inverting input of the operational amplifier. Input bias current typically 10fA (±0.01pA typ, 0.8pA max at 25°C). |
| 4 | OUT | output | Amplifier output. Rail-to-rail output with 60mA high output current drive; short-circuit current typically 60mA (45mA min) at VS = 5.5V. Open-loop output impedance ~1.6kΩ at 1MHz. |
| 5 | V+ | power_in | Positive (highest) power supply. Supply range 1.7V to 5.5V (single-supply). Quiescent current typically 24µA per amplifier. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
OPA391DCKROPA391DCKRDCKTOPA391DCKRDBVROPA391DCKRDBVTOPA391DCKRDROPA391DCKRDOPA391DCKRDGKROPA391DCKRDGKTOPA391DCKRYBJROPA391DCKRYBJTOPA391DCKRPWROPA391DCKRPW
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single-supply (VS = (V+) - (V-)) | VS | 6 | V | Single-supply | 5 | ||
| Supply voltage, dual-supply (VS = (V+) - (V-)) | VS | -3 | 3 | V | Dual-supply, printed ±3 | 5 | |
| Input current, all pins | -10 | 10 | mA | 5 | |||
| Operating temperature | TA | -55 | 150 | °C | 5 | ||
| Junction temperature | TJ | -55 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Electrostatic discharge, Human-body model (HBM) | V(ESD) | -2000 | 2000 | V | OPA391 and OPA2391; per ANSI/ESDA/JEDEC JS-001 | 5 | |
| Electrostatic discharge, Charged-device model (CDM) | V(ESD) | -500 | 500 | V | OPA391 and OPA2391; per ANSI/ESDA/JEDEC JS-002 | 5 | |
| Supply voltage, single-supply | VS | 1.7 | 5.5 | V | Single-supply | 5 | |
| Supply voltage, dual-supply | VS | 0.85 | 2.75 | V | Dual-supply, printed ±0.85 (MIN) and ±2.75 (MAX) | 5 | |
| Differential input voltage | -0.5 | 0.5 | V | 5 | |||
| Specified temperature | TA | -40 | 125 | °C | OPA391DCK, OPA2391YBJ | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 214 | °C/W | DCK (SC-70), 5 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 115 | °C/W | DCK (SC-70), 5 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 58 | °C/W | DCK (SC-70), 5 pins | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 29 | °C/W | DCK (SC-70), 5 pins | 6 | ||
| Junction-to-board characterization parameter | ΨJB | 58 | °C/W | DCK (SC-70), 5 pins | 6 | ||
| Input offset voltage | VOS | -45 | 10 | 45 | µV | VS = 5.0 V | 7 |
| Input offset voltage | VOS | -750 | 60 | 750 | µV | VCM = (V+) – 0.3 V, VS = 5.0 V | 7 |
| Input offset voltage | VOS | -80 | 15 | 80 | µV | VCM = (V–) – 0.1 V | 7 |
| Input offset voltage | VOS | -600 | 600 | µV | TA = –40°C to +125°C(1) | 7 | |
| Input offset voltage drift | dVOS/dT | -5 | 1 | 5 | µV/°C | TA = 0°C to 85°C(1) | 7 |
| Input offset voltage drift | dVOS/dT | -6 | 1.2 | 6 | µV/°C | TA = –40°C to +125°C(1) | 7 |
| Power supply rejection ratio | PSRR | 40 | µV/V | VCM = (V–) – 0.1 V | 7 | ||
| Input bias current | IB | 0.01 | 0.8 | pA | TA = 25°C(1) | 7 | |
| Input bias current | IB | 5 | pA | TA = 0°C to 85°C(1) | 7 | ||
| Input bias current | IB | 30 | pA | TA = –40°C to +125°C(1), OPA391DCK | 7 | ||
| Input offset current | IOS | 0.01 | 0.8 | pA | TA = 25°C(1) | 7 | |
| Input offset current | IOS | 5 | pA | TA = 0°C to 85°C(1) | 7 | ||
| Input offset current | IOS | 30 | pA | TA = –40°C to +125°C(1) | 7 | ||
| Common-mode rejection ratio | CMRR | 89 | 100 | dB | (V–) – 0.1 V ≤ VCM ≤ (V+) – 1.5 V, OPA391DCK | 7 | |
| Common-mode rejection ratio | CMRR | 100 | 121 | dB | (V–) – 0.1 V ≤ VCM ≤ (V+) – 1.5 V, VS = 5.5 V | 7 | |
| Common-mode rejection ratio | CMRR | 90 | 100 | dB | TA = –40°C to +125°C(1) | 7 | |
| Common-mode rejection ratio | CMRR | 69 | dB | (V+) – 0.6 V ≤ VCM ≤ (V+) + 0.1 V | 7 | ||
| Open-loop voltage gain | AOL | 100 | 121 | dB | VS = 5.5 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, VCM = (V–) – 100 mV | 8 | |
| Open-loop voltage gain | AOL | 90 | 113 | dB | VS = 1.7 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, VCM = (V+) – 1.5 V | 8 | |
| Open-loop voltage gain | AOL | 90 | 107 | dB | VS = 1.7 V, (V–) + 0.45 V < VO < (V+) – 0.45 V, VCM = (V+) – 1.5 V, RL = 2 kΩ | 8 | |
| Voltage output swing from rail | VO | 3 | 10 | mV | No load | 8 | |
| Voltage output swing from rail | VO | 40 | mV | RL = 2 kΩ | 8 | ||
| Voltage output swing from rail | VO | 10 | mV | TA = –40°C to +125°C(1), OPA391DCK | 8 | ||
| Short-circuit current | ISC | 45 | 60 | mA | VS = 5.5 V | 8 | |
| Quiescent current per amplifier | IQ | 23.5 | 30 | µA | VCM = (V+) – 1.5 V | 8 | |
| Quiescent current per amplifier | IQ | 32 | µA | TA = –40°C to +125°C(1) | 8 |
CAD (KiCad official)
- Symbol:
OPA391DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
opa391dckr-etched.step/opa391dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa391dckr.step/opa391dckr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
opa391dckr.step |
87 KB | You want the bare part, or you mark your own boards. |
opa391dckr-etched.step |
1.9 MB | You want the part with OPA391DCKR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 478 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
47047209423c48c4, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA391DCKR
**Texas Instruments** · Operational Amplifier · SC-70-5
OPA391DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Noninverting input of the operational amplifier. Common-mode input range extends 100mV beyond each supply rail; VCM = (V-)-0.1V to (V+)+0.1V. |
| 2 | V- | power_in | Negative (lowest) power supply. Single-supply operation 1.7V to 5.5V referenced from V+ to V-; dual-supply ±0.85V to ±2.75V. Absolute max supply voltage 6V. |
| 3 | -IN | input | Inverting input of the operational amplifier. Input bias current typically 10fA (±0.01pA typ, 0.8pA max at 25°C). |
| 4 | OUT | output | Amplifier output. Rail-to-rail output with 60mA high output current drive; short-circuit current typically 60mA (45mA min) at VS = 5.5V. Open-loop output impedance ~1.6kΩ at 1MHz. |
| 5 | V+ | power_in | Positive (highest) power supply. Supply range 1.7V to 5.5V (single-supply). Quiescent current typically 24µA per amplifier. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `OPA391DCKR`
- `OPA391DCKRDCKT`
- `OPA391DCKRDBVR`
- `OPA391DCKRDBVT`
- `OPA391DCKRDR`
- `OPA391DCKRD`
- `OPA391DCKRDGKR`
- `OPA391DCKRDGKT`
- `OPA391DCKRYBJR`
- `OPA391DCKRYBJT`
- `OPA391DCKRPWR`
- `OPA391DCKRPW`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single-supply (VS = (V+) - (V-)) | VS | | | 6 | V | Single-supply | 5 |
| Supply voltage, dual-supply (VS = (V+) - (V-)) | VS | -3 | | 3 | V | Dual-supply, printed ±3 | 5 |
| Input current, all pins | | -10 | | 10 | mA | | 5 |
| Operating temperature | TA | -55 | | 150 | °C | | 5 |
| Junction temperature | TJ | -55 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Electrostatic discharge, Human-body model (HBM) | V(ESD) | -2000 | | 2000 | V | OPA391 and OPA2391; per ANSI/ESDA/JEDEC JS-001 | 5 |
| Electrostatic discharge, Charged-device model (CDM) | V(ESD) | -500 | | 500 | V | OPA391 and OPA2391; per ANSI/ESDA/JEDEC JS-002 | 5 |
| Supply voltage, single-supply | VS | 1.7 | | 5.5 | V | Single-supply | 5 |
| Supply voltage, dual-supply | VS | 0.85 | | 2.75 | V | Dual-supply, printed ±0.85 (MIN) and ±2.75 (MAX) | 5 |
| Differential input voltage | | -0.5 | | 0.5 | V | | 5 |
| Specified temperature | TA | -40 | | 125 | °C | OPA391DCK, OPA2391YBJ | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 214 | | °C/W | DCK (SC-70), 5 pins | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 115 | | °C/W | DCK (SC-70), 5 pins | 6 |
| Junction-to-board thermal resistance | RθJB | | 58 | | °C/W | DCK (SC-70), 5 pins | 6 |
| Junction-to-top characterization parameter | ΨJT | | 29 | | °C/W | DCK (SC-70), 5 pins | 6 |
| Junction-to-board characterization parameter | ΨJB | | 58 | | °C/W | DCK (SC-70), 5 pins | 6 |
| Input offset voltage | VOS | -45 | 10 | 45 | µV | VS = 5.0 V | 7 |
| Input offset voltage | VOS | -750 | 60 | 750 | µV | VCM = (V+) – 0.3 V, VS = 5.0 V | 7 |
| Input offset voltage | VOS | -80 | 15 | 80 | µV | VCM = (V–) – 0.1 V | 7 |
| Input offset voltage | VOS | -600 | | 600 | µV | TA = –40°C to +125°C(1) | 7 |
| Input offset voltage drift | dVOS/dT | -5 | 1 | 5 | µV/°C | TA = 0°C to 85°C(1) | 7 |
| Input offset voltage drift | dVOS/dT | -6 | 1.2 | 6 | µV/°C | TA = –40°C to +125°C(1) | 7 |
| Power supply rejection ratio | PSRR | | | 40 | µV/V | VCM = (V–) – 0.1 V | 7 |
| Input bias current | IB | | 0.01 | 0.8 | pA | TA = 25°C(1) | 7 |
| Input bias current | IB | | | 5 | pA | TA = 0°C to 85°C(1) | 7 |
| Input bias current | IB | | | 30 | pA | TA = –40°C to +125°C(1), OPA391DCK | 7 |
| Input offset current | IOS | | 0.01 | 0.8 | pA | TA = 25°C(1) | 7 |
| Input offset current | IOS | | | 5 | pA | TA = 0°C to 85°C(1) | 7 |
| Input offset current | IOS | | | 30 | pA | TA = –40°C to +125°C(1) | 7 |
| Common-mode rejection ratio | CMRR | 89 | 100 | | dB | (V–) – 0.1 V ≤ VCM ≤ (V+) – 1.5 V, OPA391DCK | 7 |
| Common-mode rejection ratio | CMRR | 100 | 121 | | dB | (V–) – 0.1 V ≤ VCM ≤ (V+) – 1.5 V, VS = 5.5 V | 7 |
| Common-mode rejection ratio | CMRR | 90 | 100 | | dB | TA = –40°C to +125°C(1) | 7 |
| Common-mode rejection ratio | CMRR | 69 | | | dB | (V+) – 0.6 V ≤ VCM ≤ (V+) + 0.1 V | 7 |
| Open-loop voltage gain | AOL | 100 | 121 | | dB | VS = 5.5 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, VCM = (V–) – 100 mV | 8 |
| Open-loop voltage gain | AOL | 90 | 113 | | dB | VS = 1.7 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, VCM = (V+) – 1.5 V | 8 |
| Open-loop voltage gain | AOL | 90 | 107 | | dB | VS = 1.7 V, (V–) + 0.45 V < VO < (V+) – 0.45 V, VCM = (V+) – 1.5 V, RL = 2 kΩ | 8 |
| Voltage output swing from rail | VO | | 3 | 10 | mV | No load | 8 |
| Voltage output swing from rail | VO | | | 40 | mV | RL = 2 kΩ | 8 |
| Voltage output swing from rail | VO | | | 10 | mV | TA = –40°C to +125°C(1), OPA391DCK | 8 |
| Short-circuit current | ISC | 45 | 60 | | mA | VS = 5.5 V | 8 |
| Quiescent current per amplifier | IQ | | 23.5 | 30 | µA | VCM = (V+) – 1.5 V | 8 |
| Quiescent current per amplifier | IQ | | | 32 | µA | TA = –40°C to +125°C(1) | 8 |
## CAD (KiCad official)
- Symbol: `OPA391DCKR`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `opa391dckr-etched.step` / `opa391dckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa391dckr.step` / `opa391dckr.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`opa391dckr.step`](opa391dckr.step) | 87 KB | You want the bare part, or you mark your own boards. |
| [`opa391dckr-etched.step`](opa391dckr-etched.step) | 1.9 MB | You want the part with `OPA391DCKR` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 478 faces against 102 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa391.pdf) (44 pp, sha256 `47047209423c48c4`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa391dckr-datasheet.pdf)