Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA379AIDBVR

Texas Instruments · Operational Amplifier · SOT-23-5

OPA379AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, rail-to-rail with output swing within 5mV (typ) of the rail at RL = 25kΩ and short-circuit current of ±5mA.
2 V- power_in Negative supply (ground in single-supply use); total supply VS = (V+) - (V-) is 1.8V to 5.5V with 7V absolute maximum.
3 +IN input Non-inverting input, rail-to-rail with common-mode range of (V-) - 0.1V to (V+) + 0.1V and input current limited to 10mA.
4 -IN input Inverting input, rail-to-rail with common-mode range of (V-) - 0.1V to (V+) + 0.1V and input current limited to 10mA.
5 V+ power_in Positive supply, 1.8V to 5.5V relative to V- with a 0.1µF bypass capacitor placed close across the supply pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial Offset Voltage VOS 0.4 1.5 mV VS = 5V 4
Offset Voltage over temperature VOS 2 mV Over -40°C to +125°C 4
Offset Voltage Drift dVOS/dT 1.5 µV/°C -40°C to +85°C 4
Offset Voltage Drift dVOS/dT 2.7 µV/°C -40°C to +125°C 4
Power Supply Rejection Ratio PSRR 2 10 µV/V 4
Power Supply Rejection Ratio over temperature PSRR 20 µV/V Over -40°C to +125°C 4
Common-Mode Rejection Ratio CMRR 90 100 dB (V-) < VCM < (V+), 1V 4
Common-Mode Rejection Ratio over -40°C to +85°C CMRR 80 dB Over -40°C to +85°C, (V-) < VCM < (V+), 1V 4
Common-Mode Rejection Ratio over -40°C to +125°C CMRR 62 dB Over -40°C to +125°C, (V-) < VCM < (V+), 1V 4
Input Bias Current IB -50 5 50 pA VS = 5V, VCM ≤ VS/2 4
Input Offset Current IOS -50 5 50 pA VS = 5V 4
Open-Loop Voltage Gain AOL 100 120 dB VS = 5V, RL = 25kΩ, 100mV < VO < (V+), 100mV 4
Open-Loop Voltage Gain over temperature AOL 80 dB Over -40°C to +125°C, VS = 5V, RL = 25kΩ, 100mV < VO < (V+), 100mV 4
Voltage Output Swing from Rail 5 10 mV RL = 25kΩ 4
Voltage Output Swing from Rail over temperature 15 mV Over -40°C to +125°C, RL = 25kΩ 4
Voltage Output Swing from Rail 25 50 mV RL = 5kΩ 4
Voltage Output Swing from Rail over temperature 75 mV Over -40°C to +125°C, RL = 5kΩ 4
Quiescent Current per Amplifier IQ 2.9 5.5 µA VS = 5.5V, IO = 0 5
Quiescent Current per Amplifier over temperature IQ 10 µA Over -40°C to +125°C 5
Specified/Operating Voltage Range VS 1.8 5.5 V 5
Specified/Operating Temperature Range TA -40 125 °C 5
Storage Temperature Range TJ -65 150 °C 5
Thermal Resistance θJA 200 °C/W SOT23-5 5
Supply Voltage VS 7 V VS = (V+), (V-) 2
Signal Input Terminals, Current -10 10 mA 2
Operating Temperature TA -40 125 °C 2
Storage Temperature TA -65 150 °C 2
Junction Temperature TJ 150 °C 2
ESD Rating, Human Body Model HBM 2000 V 2
ESD Rating, Charged Device Model CDM 1000 V 2
Input Voltage Noise 2.8 µVPP f = 0.1Hz to 10Hz 4
Input Voltage Noise Density en 80 nV/√Hz f = 1kHz 4
Input Current Noise Density in 1 fA/√Hz f = 1kHz 4
Short-Circuit Current ISC 5 mA 4
Closed-Loop Output Impedance ROUT 10 Ω G = 1, f = 1kHz, IO = 0 4
Open-Loop Output Impedance RO 28 kΩ f = 100kHz, IO = 0 4
Gain Bandwidth Product GBW 90 kHz CLOAD = 30pF 4
Slew Rate SR 0.03 V/µs G = +1 4
Overload Recovery Time 25 µs VIN × GAIN > VS 4
Turn-On Time tON 1 ms 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: OPA379AIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa379aidbvr-etched.step / opa379aidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa379aidbvr.step / opa379aidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 abadadade43e3aea, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF