3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownOPA376AIDCKR
Texas Instruments · Precision OpAmps · SC-70-5
OPA376AIDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Non-inverting input of the op-amp. Rail-to-rail input range from V- to V+. |
| 2 | V- | power_in | Negative supply voltage. For single-supply operation tie to GND; for dual-supply operation connect to negative rail. Total supply range 2.2-5.5 V between V+ and V-. |
| 3 | -IN | input | Inverting input of the op-amp. Rail-to-rail input range from V- to V+. |
| 4 | OUT | output | Rail-to-rail amplifier output signal. Can swing within millivolts of both supply rails under light load. |
| 5 | V+ | power_in | Positive supply voltage. Operating range 2.2-5.5 V (with respect to V-). Bypass with a 0.1 uF ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
OPA376AIDCKROPA376AIDCKTOPA376AIDCKRIDBVROPA376AIDCKRIDBVTOPA376AIDCKRIDR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+)–(V–) | VS | 7 | V | 6 | |||
| Signal input pin current | -10 | 10 | mA | 6 | |||
| Operating range, free-air temperature TA | TA | -40 | 150 | °C | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage (V+)–(V–) | VS | 2.2 | 5.5 | V | 6 | ||
| Operating temperature | TA | -40 | 150 | °C | 6 | ||
| Input offset voltage | VOS | 5 | 25 | μV | 8 | ||
| Input offset voltage drift | dVOS/dT | 0.26 | 1 | μV/°C | TA = –40°C to +85°C | 8 | |
| Input offset voltage drift | dVOS/dT | 0.32 | 2 | μV/°C | TA = –40°C to +125°C | 8 | |
| Input offset voltage versus power supply (PSRR) | 5 | 20 | μV/V | TA = 25°C, VS = 2.2 V to 5.5 V, VCM < (V+) – 1.3 V | 8 | ||
| Input offset voltage versus power supply (PSRR) | 5 | μV/V | TA = –40°C to +125°C, VS = 2.2 V to 5.5 V, VCM < (V+) – 1.3 V | 8 | |||
| Input bias current | IB | 0.2 | 10 | pA | TA = 25°C | 8 | |
| Input offset current | IOS | 0.2 | 10 | pA | 8 | ||
| Common-mode rejection ratio | CMRR | 76 | 90 | dB | (V–) < VCM < (V+) – 1.3 V | 8 | |
| Open-loop voltage gain | AOL | 120 | 134 | dB | 50 mV < VO < (V+) – 50 mV, RL = 10 kΩ | 8 | |
| Open-loop voltage gain | AOL | 120 | 126 | dB | 100 mV < VO < (V+) – 100 mV, RL = 2 kΩ | 8 | |
| Voltage output swing from rail (SC70-5, SOT23-5, SO-8, VSSOP-8, TSSOP-14 packages) | 10 | 20 | mV | TA = 25°C, RL = 10 kΩ | 9 | ||
| Voltage output swing from rail (SC70-5, SOT23-5, SO-8, VSSOP-8, TSSOP-14 packages) | 40 | mV | TA = –40°C to +125°C, RL = 10 kΩ | 9 | |||
| Voltage output swing from rail (SC70-5, SOT23-5, SO-8, VSSOP-8, TSSOP-14 packages) | 40 | 50 | mV | TA = 25°C, RL = 2 kΩ | 9 | ||
| Voltage output swing from rail (SC70-5, SOT23-5, SO-8, VSSOP-8, TSSOP-14 packages) | 80 | mV | TA = –40°C to +125°C, RL = 2 kΩ | 9 | |||
| Short-circuit current | ISC | -50 | 30 | mA | 9 | ||
| Specified voltage range | VS | 2.2 | 5.5 | V | 9 | ||
| Operating voltage range | 2 | 5.5 | V | 9 | |||
| Quiescent current per amplifier | IQ | 760 | 950 | μA | TA = 25°C, IO = 0, VS = 5.5 V, VCM < (V+) – 1.3 V | 9 | |
| Quiescent current per amplifier | IQ | 1 | mA | TA = –40°C to +125°C | 9 | ||
| Specified temperature range | -40 | 125 | °C | 9 | |||
| Operating temperature range | -40 | 150 | °C | 9 | |||
| Junction-to-ambient thermal resistance (SC70, DCK) | RθJA | 267 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (SC70, DCK) | RθJC(top) | 80.9 | °C/W | 7 | |||
| Junction-to-board thermal resistance (SC70, DCK) | RθJB | 54.8 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
OPA376AIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
opa376aidckr-etched.step/opa376aidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa376aidckr.step/opa376aidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
98ab1f4e86c825b5, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).