component
OPA3693IDBQR
Public Made by Adomby adom
Texas Instruments Video Amplifiers, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
opa3693idbqr: specified limits as data (metadata.characteristics, 59 rows from the datasheet)
6a52790
13d ago
OPA3693IDBQR
Texas Instruments · Video Amplifiers · SSOP-16-150mil
OPA3693IDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN A | input | Channel A inverting input, connected through an internal 300Ω resistor to the summing junction; ground for G=+2, drive for G=-1, leave open for G=+1. |
| 2 | +IN A | input | Channel A noninverting input with 300kΩ-class high impedance (datasheet lists 300 |
| 3 | DIS B | input | Channel B active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
| 4 | -IN B | input | Channel B inverting input, connected through an internal 300Ω resistor to the summing junction. |
| 5 | +IN B | input | Channel B noninverting input, must provide the input bias current required by the input stage. |
| 6 | DIS C | input | Channel C active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
| 7 | -IN C | input | Channel C inverting input, connected through an internal 300Ω resistor to the summing junction. |
| 8 | +IN C | input | Channel C noninverting input, must provide the input bias current required by the input stage. |
| 9 | -VS | power_in | Negative power supply; total supply absolute maximum ±6.5V. |
| 10 | OUT C | output | Channel C output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 11 | +VS | power_in | Positive power supply; specified operating range ±1.75V to ±6V, or +3.5V to +12V single supply. |
| 12 | OUT B | output | Channel B output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 13 | -VS | power_in | Negative power supply; total supply absolute maximum ±6.5V. |
| 14 | OUT A | output | Channel A output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 15 | +VS | power_in | Positive power supply; specified operating range ±1.75V to ±6V, or +3.5V to +12V single supply. |
| 16 | DIS A | input | Channel A active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Amplifiers/Comparators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth, G = +2 | 470 | 650 | MHz | VS=±5V; G = +2; min at -40 to +85°C | 3 | ||
| Small-Signal Bandwidth, G = -1 | 470 | 650 | MHz | VS=±5V; G = -1; min at -40 to +85°C | 3 | ||
| Bandwidth for 0.2dB Gain Flatness | 105 | 320 | MHz | VS=±5V; VO = 1.0VPP | 3 | ||
| Peaking at a Gain of +1 | 3 | 5.7 | dB | VS=±5V; VO = 1.0VPP | 3 | ||
| Slew Rate | 2000 | 2500 | V/µs | VS=±5V; VO = 4V step | 3 | ||
| Rise-and-Fall Time | 0.6 | 0.9 | ns | VS=±5V; VO = 0.5V step | 3 | ||
| Rise-and-Fall Time | 1.2 | 1.4 | ns | VS=±5V; VO = 5V step | 3 | ||
| 2nd-Harmonic Distortion | -75 | -64 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL = 100Ω | 3 | ||
| 2nd-Harmonic Distortion | -80 | -76 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| 3rd-Harmonic Distortion | -78 | -64 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL = 100Ω | 3 | ||
| 3rd-Harmonic Distortion | -84 | -76 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| Input Voltage Noise | 1.8 | 2.9 | nV/√Hz | VS=±5V; f > 1MHz | 3 | ||
| Noninverting Input Current Noise | 18 | 22 | pA/√Hz | VS=±5V; f > 1MHz | 3 | ||
| Inverting Input Current Noise (internal) | 22 | 27 | pA/√Hz | VS=±5V; f > 1MHz | 3 | ||
| Gain Error, G = +2 | 0.6 | 1.2 | % | VS=±5V; G = +2; max at -40 to +85°C | 3 | ||
| Gain Error, G = -1, Rs = 0Ω | 0.5 | 1.1 | % | VS=±5V; G = -1, Rs = 0Ω; max at -40 to +85°C | 3 | ||
| Internal RF and RG, Maximum | 300 | 347 | Ω | VS=±5V | 3 | ||
| Internal RF and RG, Minimum | 258 | 300 | Ω | VS=±5V | 3 | ||
| Input Offset Voltage | 0.6 | 4 | mV | VS=±5V; VCM = 0V | 3 | ||
| Average Offset Voltage Drift | 8 | 8 | µV/°C | VS=±5V; VCM = 0V | 3 | ||
| Noninverting Input Bias Current | 15 | 45 | µA | VS=±5V; VCM = 0V | 3 | ||
| Average Noninverting Input Bias Current Drift | 170 | 170 | nA/°C | VS=±5V; VCM = 0V | 3 | ||
| Inverting Input Bias Current (internal) | 20 | 54 | µA | VS=±5V; VCM = 0V | 3 | ||
| Average Inverting Input Bias Current Drift | 50 | 60 | nA/°C | VS=±5V; VCM = 0V | 3 | ||
| Common-Mode Input Voltage Range (CMIR) | -3.2 | 3.4 | V | VS=±5V | 4 | ||
| Voltage Output Swing | -3.8 | 4.1 | V | VS=±5V; no load; min at -40 to +85°C | 4 | ||
| Voltage Output Swing | -3.7 | 3.8 | V | VS=±5V; 100Ω load; min at -40 to +85°C | 4 | ||
| Current Output: Sinking, Sourcing | -70 | 100 | mA | VS=±5V; VO = 0; min at -40 to +85°C | 4 | ||
| Enable Voltage | 3.7 | 3.3 | V | VS=±5V | 4 | ||
| Disable Voltage | 1.8 | 1.5 | V | VS=±5V | 4 | ||
| Control Pin Input Bias Current (DIS) | 75 | 149 | µA | VS=±5V; VDIS = 0, each channel | 4 | ||
| Minimum Operating Voltage | 1.9 | 1.75 | V | VS=±5V; min at -40 to +85°C | 4 | ||
| Maximum Operating Voltage | 6 | 6 | V | VS=±5V | 4 | ||
| Maximum Quiescent Current | 39 | 43.5 | mA | VS = ±5V; max at -40 to +85°C | 4 | ||
| Minimum Quiescent Current | 33 | 39 | mA | VS = ±5V; min at -40 to +85°C | 4 | ||
| Small-Signal Bandwidth, G = +2 | 380 | 500 | MHz | VS=+5V; G = +2; min at -40 to +85°C | 5 | ||
| Slew Rate | 1000 | 1500 | V/µs | VS=+5V; 2V step | 5 | ||
| Input Offset Voltage | 0.6 | 4.2 | mV | VS=+5V; VCM = VS/2 | 5 | ||
| Least Positive Input Voltage | 1.6 | 1.8 | V | VS=+5V | 6 | ||
| Most Positive Input Voltage | 3.2 | 3.4 | V | VS=+5V | 6 | ||
| Most Positive Output Voltage | 4 | 4.2 | V | VS=+5V; no load | 6 | ||
| Most Positive Output Voltage | 3.9 | 4 | V | VS=+5V; RL = 100Ω load to VS/2 | 6 | ||
| Least Positive Output Voltage | 0.8 | 1 | V | VS=+5V; no load | 6 | ||
| Least Positive Output Voltage | 1 | 1.1 | V | VS=+5V; RL = 100Ω load to VS/2 | 6 | ||
| Current Output Sourcing, Sinking | -70 | 100 | mA | VS=+5V; VO = VS/2; min at -40 to +85°C | 6 | ||
| Enable Voltage | 3.7 | 3.3 | V | VS=+5V | 6 | ||
| Disable Voltage | 1.8 | 1.5 | V | VS=+5V | 6 | ||
| Minimum Single-Supply Operating Voltage | 3.8 | 3.5 | V | VS=+5V single supply; min at -40 to +85°C | 6 | ||
| Maximum Single-Supply Operating Voltage | 12 | 12 | V | single supply | 6 | ||
| Maximum Quiescent Current | 34.5 | 39.2 | mA | VS = +5V; max at -40 to +85°C | 6 | ||
| Minimum Quiescent Current | 27.2 | 34.5 | mA | VS = +5V; min at -40 to +85°C | 6 | ||
| Power Supply | 6.5 | VDC | 2 | ||||
| Differential Input Voltage | 1.2 | V | 2 | ||||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | soldering, 10s | 2 | |||
| Maximum Junction Peak Temperature | TJ | 150 | °C | 2 | |||
| Maximum Junction Temperature, Continuous Operation | TJ | 140 | °C | continuous operation, long-term reliability | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | IDBQ package | 4 | ||
| Thermal Resistance, Junction-to-Ambient | θJA | 80 | °C/W | DBQ SSOP-16 | 4 |
CAD (KiCad official)
- Symbol:
OPA3693IDBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
opa3693idbqr-etched.step/opa3693idbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa3693idbqr.step/opa3693idbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
aa628225f7be00ca, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA3693IDBQR
**Texas Instruments** · Video Amplifiers · SSOP-16-150mil
OPA3693IDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN A | input | Channel A inverting input, connected through an internal 300Ω resistor to the summing junction; ground for G=+2, drive for G=-1, leave open for G=+1. |
| 2 | +IN A | input | Channel A noninverting input with 300kΩ-class high impedance (datasheet lists 300 || 1.2 kΩ||pF), common-mode range ±3.4V on ±5V supplies. |
| 3 | DIS B | input | Channel B active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
| 4 | -IN B | input | Channel B inverting input, connected through an internal 300Ω resistor to the summing junction. |
| 5 | +IN B | input | Channel B noninverting input, must provide the input bias current required by the input stage. |
| 6 | DIS C | input | Channel C active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
| 7 | -IN C | input | Channel C inverting input, connected through an internal 300Ω resistor to the summing junction. |
| 8 | +IN C | input | Channel C noninverting input, must provide the input bias current required by the input stage. |
| 9 | -VS | power_in | Negative power supply; total supply absolute maximum ±6.5V. |
| 10 | OUT C | output | Channel C output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 11 | +VS | power_in | Positive power supply; specified operating range ±1.75V to ±6V, or +3.5V to +12V single supply. |
| 12 | OUT B | output | Channel B output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 13 | -VS | power_in | Negative power supply; total supply absolute maximum ±6.5V. |
| 14 | OUT A | output | Channel A output, ±100mA typical output current and ±3.8V swing into 100Ω on ±5V supplies. |
| 15 | +VS | power_in | Positive power supply; specified operating range ±1.75V to ±6V, or +3.5V to +12V single supply. |
| 16 | DIS A | input | Channel A active-low disable control; leave open or high for normal operation, pull low to shut down the channel. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Amplifiers/Comparators |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth, G = +2 | | 470 | 650 | | MHz | VS=±5V; G = +2; min at -40 to +85°C | 3 |
| Small-Signal Bandwidth, G = -1 | | 470 | 650 | | MHz | VS=±5V; G = -1; min at -40 to +85°C | 3 |
| Bandwidth for 0.2dB Gain Flatness | | 105 | 320 | | MHz | VS=±5V; VO = 1.0VPP | 3 |
| Peaking at a Gain of +1 | | | 3 | 5.7 | dB | VS=±5V; VO = 1.0VPP | 3 |
| Slew Rate | | 2000 | 2500 | | V/µs | VS=±5V; VO = 4V step | 3 |
| Rise-and-Fall Time | | | 0.6 | 0.9 | ns | VS=±5V; VO = 0.5V step | 3 |
| Rise-and-Fall Time | | | 1.2 | 1.4 | ns | VS=±5V; VO = 5V step | 3 |
| 2nd-Harmonic Distortion | | | -75 | -64 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL = 100Ω | 3 |
| 2nd-Harmonic Distortion | | | -80 | -76 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL ≥ 500Ω | 3 |
| 3rd-Harmonic Distortion | | | -78 | -64 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL = 100Ω | 3 |
| 3rd-Harmonic Distortion | | | -84 | -76 | dBc | VS=±5V; f = 10MHz, VO = 2VPP, RL ≥ 500Ω | 3 |
| Input Voltage Noise | | | 1.8 | 2.9 | nV/√Hz | VS=±5V; f > 1MHz | 3 |
| Noninverting Input Current Noise | | | 18 | 22 | pA/√Hz | VS=±5V; f > 1MHz | 3 |
| Inverting Input Current Noise (internal) | | | 22 | 27 | pA/√Hz | VS=±5V; f > 1MHz | 3 |
| Gain Error, G = +2 | | | 0.6 | 1.2 | % | VS=±5V; G = +2; max at -40 to +85°C | 3 |
| Gain Error, G = -1, Rs = 0Ω | | | 0.5 | 1.1 | % | VS=±5V; G = -1, Rs = 0Ω; max at -40 to +85°C | 3 |
| Internal RF and RG, Maximum | | | 300 | 347 | Ω | VS=±5V | 3 |
| Internal RF and RG, Minimum | | 258 | 300 | | Ω | VS=±5V | 3 |
| Input Offset Voltage | | | 0.6 | 4 | mV | VS=±5V; VCM = 0V | 3 |
| Average Offset Voltage Drift | | | 8 | 8 | µV/°C | VS=±5V; VCM = 0V | 3 |
| Noninverting Input Bias Current | | | 15 | 45 | µA | VS=±5V; VCM = 0V | 3 |
| Average Noninverting Input Bias Current Drift | | | 170 | 170 | nA/°C | VS=±5V; VCM = 0V | 3 |
| Inverting Input Bias Current (internal) | | | 20 | 54 | µA | VS=±5V; VCM = 0V | 3 |
| Average Inverting Input Bias Current Drift | | | 50 | 60 | nA/°C | VS=±5V; VCM = 0V | 3 |
| Common-Mode Input Voltage Range (CMIR) | | -3.2 | 3.4 | | V | VS=±5V | 4 |
| Voltage Output Swing | | -3.8 | 4.1 | | V | VS=±5V; no load; min at -40 to +85°C | 4 |
| Voltage Output Swing | | -3.7 | 3.8 | | V | VS=±5V; 100Ω load; min at -40 to +85°C | 4 |
| Current Output: Sinking, Sourcing | | -70 | 100 | | mA | VS=±5V; VO = 0; min at -40 to +85°C | 4 |
| Enable Voltage | | 3.7 | 3.3 | | V | VS=±5V | 4 |
| Disable Voltage | | | 1.8 | 1.5 | V | VS=±5V | 4 |
| Control Pin Input Bias Current (DIS) | | | 75 | 149 | µA | VS=±5V; VDIS = 0, each channel | 4 |
| Minimum Operating Voltage | | 1.9 | 1.75 | | V | VS=±5V; min at -40 to +85°C | 4 |
| Maximum Operating Voltage | | | 6 | 6 | V | VS=±5V | 4 |
| Maximum Quiescent Current | | | 39 | 43.5 | mA | VS = ±5V; max at -40 to +85°C | 4 |
| Minimum Quiescent Current | | 33 | 39 | | mA | VS = ±5V; min at -40 to +85°C | 4 |
| Small-Signal Bandwidth, G = +2 | | 380 | 500 | | MHz | VS=+5V; G = +2; min at -40 to +85°C | 5 |
| Slew Rate | | 1000 | 1500 | | V/µs | VS=+5V; 2V step | 5 |
| Input Offset Voltage | | | 0.6 | 4.2 | mV | VS=+5V; VCM = VS/2 | 5 |
| Least Positive Input Voltage | | | 1.6 | 1.8 | V | VS=+5V | 6 |
| Most Positive Input Voltage | | 3.2 | 3.4 | | V | VS=+5V | 6 |
| Most Positive Output Voltage | | 4 | 4.2 | | V | VS=+5V; no load | 6 |
| Most Positive Output Voltage | | 3.9 | 4 | | V | VS=+5V; RL = 100Ω load to VS/2 | 6 |
| Least Positive Output Voltage | | | 0.8 | 1 | V | VS=+5V; no load | 6 |
| Least Positive Output Voltage | | | 1 | 1.1 | V | VS=+5V; RL = 100Ω load to VS/2 | 6 |
| Current Output Sourcing, Sinking | | -70 | 100 | | mA | VS=+5V; VO = VS/2; min at -40 to +85°C | 6 |
| Enable Voltage | | 3.7 | 3.3 | | V | VS=+5V | 6 |
| Disable Voltage | | | 1.8 | 1.5 | V | VS=+5V | 6 |
| Minimum Single-Supply Operating Voltage | | 3.8 | 3.5 | | V | VS=+5V single supply; min at -40 to +85°C | 6 |
| Maximum Single-Supply Operating Voltage | | | 12 | 12 | V | single supply | 6 |
| Maximum Quiescent Current | | | 34.5 | 39.2 | mA | VS = +5V; max at -40 to +85°C | 6 |
| Minimum Quiescent Current | | 27.2 | 34.5 | | mA | VS = +5V; min at -40 to +85°C | 6 |
| Power Supply | | | | 6.5 | VDC | | 2 |
| Differential Input Voltage | | | | 1.2 | V | | 2 |
| Storage Temperature Range | | -65 | | 125 | °C | | 2 |
| Lead Temperature (soldering, 10s) | | | | 300 | °C | soldering, 10s | 2 |
| Maximum Junction Peak Temperature | TJ | | | 150 | °C | | 2 |
| Maximum Junction Temperature, Continuous Operation | TJ | | | 140 | °C | continuous operation, long-term reliability | 2 |
| Specified Temperature Range | | -40 | | 85 | °C | IDBQ package | 4 |
| Thermal Resistance, Junction-to-Ambient | θJA | | 80 | | °C/W | DBQ SSOP-16 | 4 |
## CAD (KiCad official)
- Symbol: `OPA3693IDBQR`
- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `opa3693idbqr-etched.step` / `opa3693idbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa3693idbqr.step` / `opa3693idbqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa3693) (35 pp, sha256 `aa628225f7be00ca`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa3693idbqr-datasheet.pdf)