component
OPA3692IDBQR
Public Made by Adomby adom
Texas Instruments Video Amplifiers, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# OPA3692IDBQR++**Texas Instruments** · Video Amplifiers · SSOP-16++OPA3692IDBQR from Texas Instruments, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | -IN A | input | Inverting input of channel A; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |+| 2 | +IN A | input | Noninverting input of channel A; input common-mode range is ±3.5V typical at VS = ±5V. |+| 3 | DIS B | input | Disable control for channel B; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |+| 4 | -IN B | input | Inverting input of channel B; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |+| 5 | +IN B | input | Noninverting input of channel B; input common-mode range is ±3.5V typical at VS = ±5V. |+| 6 | DIS C | input | Disable control for channel C; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |+| 7 | -IN C | input | Inverting input of channel C; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |+| 8 | +IN C | input | Noninverting input of channel C; input common-mode range is ±3.5V typical at VS = ±5V. |+| 9 | -VS | power_in | Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V). |+| 10 | OUT C | output | Output of channel C, rated for ±190mA typical output current and ±4.0V typical swing with no load. |+| 11 | +VS | power_in | Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation. |+| 12 | OUT B | output | Output of channel B, rated for ±190mA typical output current and ±4.0V typical swing with no load. |+| 13 | -VS | power_in | Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V). |+| 14 | OUT A | output | Output of channel A, rated for ±190mA typical output current and ±4.0V typical swing with no load. |+| 15 | +VS | power_in | Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation. |+| 16 | DIS A | input | Disable control for channel A; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-16 |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `OPA3692IDBQR`+- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`+- 3D model: SSOP-16 (KiCad packages3D, STEP)+- 3D model files: `opa3692idbqr-etched.step` / `opa3692idbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa3692idbqr.step` / `opa3692idbqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa3692) (28 pp, sha256 `c4dce02db7abc6fa`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opa3692idbqr-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "opa3692idbqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Video Amplifiers, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "opa3692idbqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "opa3692idbqr.kicad_sym",+ "opa3692idbqr.kicad_mod",+ "opa3692idbqr.glb",+ "opa3692idbqr.step",+ "opa3692idbqr.lbr",+ "docs/hero.png",+ "docs/opa3692idbqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "opa3692idbqr-hero.glb",+ "opa3692idbqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "OPA3692IDBQR",+ "manufacturer": "Texas Instruments",+ "package": "SSOP-16",+ "pin_count": 16,+ "category": "Amplifiers/Comparators",+ "subcategory": "Video Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/opa3692",+ "parts": {+ "symbol": "opa3692idbqr.kicad_sym",+ "footprint": "opa3692idbqr.kicad_mod",+ "model_3d": "opa3692idbqr-hero.glb",+ "model_3d_plain": "opa3692idbqr.glb",+ "model_3d_step": "opa3692idbqr-etched.step",+ "model_3d_step_plain": "opa3692idbqr.step",+ "lbr": "opa3692idbqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C3824447",+ "digikey": "OPA3692IDBQR-ND",+ "mouser": "595-OPA3692IDBQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:12:48Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "OPA3692IDBQR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-OPA3692IDBQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "-IN A",+ "type": "input",+ "description": "Inverting input of channel A; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS."+ },+ {+ "number": "2",+ "name": "+IN A",+ "type": "input",+ "description": "Noninverting input of channel A; input common-mode range is ±3.5V typical at VS = ±5V."+ },+ {+ "number": "3",+ "name": "DIS B",+ "type": "input",+ "description": "Disable control for channel B; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance."+ },+ {+ "number": "4",+ "name": "-IN B",+ "type": "input",+ "description": "Inverting input of channel B; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS."+ },+ {+ "number": "5",+ "name": "+IN B",+ "type": "input",+ "description": "Noninverting input of channel B; input common-mode range is ±3.5V typical at VS = ±5V."+ },+ {+ "number": "6",+ "name": "DIS C",+ "type": "input",+ "description": "Disable control for channel C; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance."+ },+ {+ "number": "7",+ "name": "-IN C",+ "type": "input",+ "description": "Inverting input of channel C; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS."+ },+ {+ "number": "8",+ "name": "+IN C",+ "type": "input",+ "description": "Noninverting input of channel C; input common-mode range is ±3.5V typical at VS = ±5V."+ },+ {+ "number": "9",+ "name": "-VS",+ "type": "power_in",+ "description": "Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V)."+ },+ {+ "number": "10",+ "name": "OUT C",+ "type": "output",+ "description": "Output of channel C, rated for ±190mA typical output current and ±4.0V typical swing with no load."+ },+ {+ "number": "11",+ "name": "+VS",+ "type": "power_in",+ "description": "Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation."+ },+ {+ "number": "12",+ "name": "OUT B",+ "type": "output",+ "description": "Output of channel B, rated for ±190mA typical output current and ±4.0V typical swing with no load."+ },+ {+ "number": "13",+ "name": "-VS",+ "type": "power_in",+ "description": "Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V)."+ },+ {+ "number": "14",+ "name": "OUT A",+ "type": "output",+ "description": "Output of channel A, rated for ±190mA typical output current and ±4.0V typical swing with no load."+ },+ {+ "number": "15",+ "name": "+VS",+ "type": "power_in",+ "description": "Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation."+ },+ {+ "number": "16",+ "name": "DIS A",+ "type": "input",+ "description": "Disable control for channel A; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers were assigned from the extracted pin-configuration text, which lists pins 1-16 and names; The datasheet pages provided do not include the full figure, so pin 9-16 mapping and the DIS-to-chan; The power-supply pins are typed as power_in per the KiCad convention for supply pins. The datasheet "+ ],+ "pages_sent": 10,+ "cost_usd": 0.0806,+ "at": "2026-10-08T18:12:30"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/opa3692",+ "pages": 28,+ "sha256": "c4dce02db7abc6fa",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "opa3692idbqr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "opa3692idbqr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9ff9b923f7cff94e5231aca7d3dcb73573a1b90c9372bc3049ce6df125bb2494",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}