component
OPA3692IDBQR
Public Made by Adomby adom
Texas Instruments Video Amplifiers, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA3692IDBQR
Texas Instruments · Video Amplifiers · SSOP-16
OPA3692IDBQR from Texas Instruments, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN A | input | Inverting input of channel A; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |
| 2 | +IN A | input | Noninverting input of channel A; input common-mode range is ±3.5V typical at VS = ±5V. |
| 3 | DIS B | input | Disable control for channel B; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |
| 4 | -IN B | input | Inverting input of channel B; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |
| 5 | +IN B | input | Noninverting input of channel B; input common-mode range is ±3.5V typical at VS = ±5V. |
| 6 | DIS C | input | Disable control for channel C; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |
| 7 | -IN C | input | Inverting input of channel C; differential input voltage is limited to ±1.2V absolute maximum and the input voltage range is ±VS. |
| 8 | +IN C | input | Noninverting input of channel C; input common-mode range is ±3.5V typical at VS = ±5V. |
| 9 | -VS | power_in | Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V). |
| 10 | OUT C | output | Output of channel C, rated for ±190mA typical output current and ±4.0V typical swing with no load. |
| 11 | +VS | power_in | Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation. |
| 12 | OUT B | output | Output of channel B, rated for ±190mA typical output current and ±4.0V typical swing with no load. |
| 13 | -VS | power_in | Negative power supply; used for dual-supply operation from ±2.5V to ±6V (absolute maximum supply ±6.5V). |
| 14 | OUT A | output | Output of channel A, rated for ±190mA typical output current and ±4.0V typical swing with no load. |
| 15 | +VS | power_in | Positive power supply; supports +5V to +12V single-supply or ±2.5V to ±6V dual-supply operation. |
| 16 | DIS A | input | Disable control for channel A; leave open or hold HIGH for normal operation, and pull LOW (disable voltage 1.8V max) to drop supply current below 150µA/ch with the output in high impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16 |
| Category | Amplifiers/Comparators |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
OPA3692IDBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16 (KiCad packages3D, STEP)
- 3D model files:
opa3692idbqr-etched.step/opa3692idbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa3692idbqr.step/opa3692idbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
c4dce02db7abc6fa, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).