main
History Download
Ray Publish 0.1.0 71a1dab

OPA365AIDBVT

Texas Instruments · Operational Amplifier · SOT-23-5

OPA365AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Amplifier output; the output voltage swing is within 10 mV of the supply rails.
2 V- power_in Negative (lowest) power supply; the supply span (V+) - (V-) is specified from 2.2 V to 5.5 V.
3 +IN input Positive (noninverting) input; the common-mode range extends from (V-) - 0.1 V to (V+) + 0.1 V.
4 -IN input Negative (inverting) input; input signals more than 0.5 V beyond the supply rails should be limited to 10 mA or less.
5 V+ power_in Positive (highest) power supply; the absolute maximum supply voltage is 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 5.5 V 5
Signal input terminals, voltage -0.5 0.5 V 5
Signal input terminals, current -10 10 mA 5
Operating temperature, TA TA -40 150 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Power supply voltage, (V+), (V-) 2.2 5.5 V 5
Specified temperature -40 125 °C 5
Operating temperature -40 150 °C 5
Input offset voltage VOS 100 200 µV 6
Input bias current IB -10 0.2 10 pA 6
Input offset current IOS -10 0.2 10 pA 6
Common-mode rejection ratio CMRR 100 120 dB (V−) − 0.1 V ≤ VCM ≤ (V+) + 0.1 V, at TA = −40°C to +125°C 6
Open-loop voltage gain AOL 100 120 dB RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, at TA = −40°C to +125°C 6
Open-loop voltage gain AOL 94 dB RL = 600 Ω, 200 mV < VO < (V+), 200 mV, at TA = −40°C to +125°C 6
Overload recovery time 0.1 µs VS = 5 V, VIN × Gain > VS 7
Voltage output swing from rail 10 20 mV RL = 10 kΩ, VS = 5.5 V, at TA = −40°C to +125°C 7
Short-circuit current ISC -65 65 mA 7
Specified voltage range VS 2.2 5.5 V 7
Quiescent current per amplifier IQ 4.6 5 mA IO = 0 mA 7
Quiescent current per amplifier over temperature IQ 5 mA At TA = −40°C to +125°C 7
Input offset voltage versus drift dVOS/dT 1 µV/°C At TA = −40°C to +125°C 6
Input offset voltage versus power supply PSRR 10 µV/V VS = 2.2 V to 5.5 V, at TA = −40°C to +125°C 6
Channel separation, DC 0.2 µV/V 6
Input voltage noise en 5 µVPP f = 0.1 Hz to 10 Hz 6
Input voltage noise density en 4.5 nV/√Hz f = 100 kHz 6
Input current noise density in 4 fA/√Hz f = 10 kHz 6
Input capacitance, differential 6 pF 6
Input capacitance, common-mode 2 pF 6
Gain-bandwidth product GBW 50 MHz VS = 5 V 7
Slew rate SR 25 V/µs VS = 5 V, G = 1 7
Settling time, 0.1% tS 200 ns VS = 5 V, 4-V step, G = +1 7
Settling time, 0.01% tS 300 ns VS = 5 V, 4-V step, G = +1 7
Total harmonic distortion + noise THD+N 0.0004 % VS = 5 V, RL = 600 Ω, VO = 4 VPP, G = 1, f = 1 kHz 7
Open-loop output impedance 30 Ω f = 1 MHz, IO = 0 mA 7
Junction-to-ambient thermal resistance, DBV (SOT-23) RθJA 206.9 °C/W 5
Junction-to-case (top) thermal resistance, DBV (SOT-23) RθJC(top) 69.4 °C/W 5
Junction-to-board thermal resistance, DBV (SOT-23) RθJB 34.2 °C/W 5

CAD (KiCad official)

  • Symbol: OPA365AIDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa365aidbvt-etched.step / opa365aidbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa365aidbvt.step / opa365aidbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 9a87d0790f4b118c, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF