component
OPA364AIDBVR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA364AIDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
OPA364AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output; it swings to within about 10 mV of the supply rails at RL = 10 kΩ and 25°C, and 20 mV at −40°C to +125°C. |
| 2 | V- | power_in | Negative (lowest) power supply; the operating supply [V+] - [V-] is specified from 1.8 V to 5.5 V, with an absolute maximum of 5.5 V. |
| 3 | +IN | input | Positive (non-inverting) input; the common-mode range extends 100 mV beyond each supply rail, and input current is limited to 10 mA if the input is driven more than 0.5 V beyond a rail. |
| 4 | -IN | input | Negative (inverting) input; it shares the same 100 mV beyond-rail common-mode range and the same 10 mA input current limit as +IN. |
| 5 | V+ | power_in | Positive (highest) power supply; the operating supply [V+] - [V-] is specified from 1.8 V to 5.5 V, with an absolute maximum of 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (OPA364AI grade) | VOS | 1 | 2.5 | mV | 11 | ||
| Input bias current | IB | -10 | 1 | 10 | pA | TA = 25°C | 11 |
| Input offset current | IOS | -10 | 1 | 10 | pA | 11 | |
| Power supply rejection ratio (input offset voltage vs supply) | PSRR | 80 | 330 | µV/V | VS = 1.8V to 5.5V; VCM = (V–); TA = –40°C to +125°C | 11 | |
| Common-mode rejection ratio | CMRR | 74 | 90 | dB | (V−) – 0.1V < VCM < (V+) + 0.1V; TA = –40°C to +125°C | 11 | |
| Open-loop voltage gain | AOL | 94 | 100 | dB | RL = 10kΩ; 100mV < VO < (V+) – 100mV; TA = 25°C | 11 | |
| Open-loop voltage gain (full temperature and supply range) | AOL | 86 | dB | RL = 10kΩ; 100mV < VO < (V+) – 100mV; VS = 1.8V to 5.5V; TA = –40°C to +125°C | 11 | ||
| Output voltage swing from rail | 10 | 20 | mV | RL = 10kΩ; TA = 25°C | 11 | ||
| Output voltage swing from rail (full temperature) | 20 | mV | RL = 10kΩ; TA = –40°C to +125°C | 11 | |||
| Rated supply voltage range | VS | 1.8 | 5.5 | V | 12 | ||
| Quiescent current per amplifier | IQ | 650 | 750 | µA | VS = 1.8V; TA = –40°C to +125°C | 12 | |
| Quiescent current per amplifier | IQ | 850 | 1000 | µA | VS = 3.6V; TA = –40°C to +125°C | 12 | |
| Quiescent current per amplifier | IQ | 1.1 | 1.4 | mA | VS = 5.5V; TA = –40°C to +125°C | 12 | |
| Input offset voltage drift | dVOS/dT | 3 | µV/°C | TA = –40°C to +125°C | 11 | ||
| Voltage noise, 0.1 Hz to 10 Hz | en | 10 | µVPP | f = 0.1Hz to 10Hz | 11 | ||
| Voltage noise density | en | 17 | nV/√Hz | f = 10kHz | 11 | ||
| Current noise density | in | 0.6 | fA/√Hz | f = 10kHz | 11 | ||
| Differential input capacitance | 2 | pF | 11 | ||||
| Common-mode input capacitance | 3 | pF | 11 | ||||
| Gain-bandwidth product | GBW | 7 | MHz | CL = 100pF | 11 | ||
| Slew rate | SR | 5 | V/µs | CL = 100pF; G = 1 | 11 | ||
| Settling time to 0.1% | tS | 1 | µs | 0.1%; CL = 100pF; VS = 5V; 4V step; G = 1 | 11 | ||
| Settling time to 0.01% | tS | 1.5 | µs | 0.01%; CL = 100pF; VS = 5V; 4V step; G = 1 | 11 | ||
| Overload recovery time | 0.8 | µs | CL = 100pF; VIN × gain > VS | 11 | |||
| Total harmonic distortion + noise | THD+N | 0.002 | % | CL = 100pF; VS = 5V; G = 1; f = 20Hz to 20kHz | 11 | ||
| Rated operating supply voltage range (power-supply recommendation) | 2.7 | 5.5 | V | Section 10 states rated operating range of OPAx363 and OPAx364 as 2.7 V to 5.5 V (±1.35 V to ±2.75 V) | 25 |
CAD (KiCad official)
- Symbol:
OPA364AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa364aidbvr-etched.step/opa364aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa364aidbvr.step/opa364aidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (65 pp, sha256
78a564cc6571e3d7, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).