component
OPA363IDBVR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
OPA363IDBVR
Texas Instruments · Operational Amplifier · SOT-23-6
OPA363IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output. |
| 2 | V- | power_in | Negative (lowest) power supply; supply voltage ([V+] - [V-]) must be 1.8 V to 5.5 V. |
| 3 | +IN | input | Positive (noninverting) input. |
| 4 | -IN | input | Negative (inverting) input. |
| 5 | Enable | input | Enable input; the shutdown mode drops standby current to less than 1 µA. |
| 6 | V+ | power_in | Positive (highest) power supply; supply voltage ([V+] - [V-]) must be 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 500 | µV | VS = 5 V (OPA363I, OPA364I) | 11 | ||
| Input offset voltage drift | dVOS/dT | 3 | µV/°C | TA = -40°C to +125°C | 11 | ||
| Input offset voltage vs power supply | PSRR | 80 | 330 | µV/V | VS = 1.8 V to 5.5 V, VCM = (V-), TA = -40°C to +125°C | 11 | |
| Input bias current | IB | -10 | 1 | 10 | pA | TA = 25°C | 11 |
| Input offset current | IOS | -10 | 1 | 10 | pA | 11 | |
| Common-mode rejection ratio | CMRR | 74 | 90 | dB | (V−), 0.1 V < VCM < (V+) + 0.1 V, TA = -40°C to +125°C | 11 | |
| Open-loop voltage gain | AOL | 94 | 100 | dB | RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, TA = 25°C | 11 | |
| Open-loop voltage gain | AOL | 86 | dB | RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, VS = 1.8 V to 5.5 V, TA = -40°C to +125°C | 11 | ||
| Voltage output swing | 10 | 20 | mV | RL = 10 kΩ, TA = 25°C | 11 | ||
| Voltage output swing | 20 | mV | RL = 10 kΩ, TA = -40°C to +125°C | 11 | |||
| Logic high threshold | VH | 5.5 | V | Amplifier is active | 11 | ||
| Quiescent current at shutdown (per amplifier) | IQ(sd) | 0.9 | µA | 11 | |||
| Specified voltage range | VS | 1.8 | 5.5 | V | 12 | ||
| Quiescent current (per amplifier) | IQ | 650 | 750 | µA | VS = 1.8 V, TA = -40°C to +125°C | 12 | |
| Quiescent current (per amplifier) | IQ | 850 | 1000 | µA | VS = 3.6 V, TA = -40°C to +125°C | 12 | |
| Quiescent current (per amplifier) | IQ | 1.1 | 1.4 | mA | VS = 5.5 V, TA = -40°C to +125°C | 12 | |
| Supply voltage ([V+], [V-]) | 0 | 5.5 | V | 8 | |||
| Signal input pin current | -10 | 10 | mA | 8 | |||
| Junction temperature | TJ | 150 | °C | 8 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 8 | |
| ESD CDM | V(ESD) | -750 | 750 | V | Charged-device model, JESD22-C101 | 8 | |
| Supply voltage ([V+], [V-]) | 1.8 | 5.5 | V | 8 | |||
| Operating temperature | TA | -40 | 125 | °C | 8 | ||
| Junction-to-ambient thermal resistance | RθJA | 211.4 | °C/W | DBV (SOT-23) | 9 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 137 | °C/W | DBV (SOT-23) | 9 | ||
| Junction-to-board thermal resistance | RθJB | 39.8 | °C/W | DBV (SOT-23) | 9 | ||
| Junction-to-top characterization parameter | ψJT | 20.6 | °C/W | DBV (SOT-23) | 9 | ||
| Junction-to-board characterization parameter | ψJB | 38.9 | °C/W | DBV (SOT-23) | 9 | ||
| Input voltage noise | en | 10 | µVPP | f = 0.1 Hz to 10 Hz | 11 | ||
| Gain-bandwidth product | GBW | 7 | MHz | CL = 100 pF | 11 | ||
| Slew rate | SR | 5 | V/µs | CL = 100 pF, G = 1 | 11 | ||
| Turnon time | tON | 20 | µs | 11 | |||
| Turnoff time | tOFF | 1 | µs | 11 |
CAD (KiCad official)
- Symbol:
OPA363IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
opa363idbvr-etched.step/opa363idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa363idbvr.step/opa363idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
9609f23ba0f31d1c, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA363IDBVR
**Texas Instruments** · Operational Amplifier · SOT-23-6
OPA363IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output. |
| 2 | V- | power_in | Negative (lowest) power supply; supply voltage ([V+] - [V-]) must be 1.8 V to 5.5 V. |
| 3 | +IN | input | Positive (noninverting) input. |
| 4 | -IN | input | Negative (inverting) input. |
| 5 | Enable | input | Enable input; the shutdown mode drops standby current to less than 1 µA. |
| 6 | V+ | power_in | Positive (highest) power supply; supply voltage ([V+] - [V-]) must be 1.8 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | | | 500 | µV | VS = 5 V (OPA363I, OPA364I) | 11 |
| Input offset voltage drift | dVOS/dT | | 3 | | µV/°C | TA = -40°C to +125°C | 11 |
| Input offset voltage vs power supply | PSRR | | 80 | 330 | µV/V | VS = 1.8 V to 5.5 V, VCM = (V-), TA = -40°C to +125°C | 11 |
| Input bias current | IB | -10 | 1 | 10 | pA | TA = 25°C | 11 |
| Input offset current | IOS | -10 | 1 | 10 | pA | | 11 |
| Common-mode rejection ratio | CMRR | 74 | 90 | | dB | (V−), 0.1 V < VCM < (V+) + 0.1 V, TA = -40°C to +125°C | 11 |
| Open-loop voltage gain | AOL | 94 | 100 | | dB | RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, TA = 25°C | 11 |
| Open-loop voltage gain | AOL | 86 | | | dB | RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, VS = 1.8 V to 5.5 V, TA = -40°C to +125°C | 11 |
| Voltage output swing | | | 10 | 20 | mV | RL = 10 kΩ, TA = 25°C | 11 |
| Voltage output swing | | | | 20 | mV | RL = 10 kΩ, TA = -40°C to +125°C | 11 |
| Logic high threshold | VH | | | 5.5 | V | Amplifier is active | 11 |
| Quiescent current at shutdown (per amplifier) | IQ(sd) | | | 0.9 | µA | | 11 |
| Specified voltage range | VS | 1.8 | | 5.5 | V | | 12 |
| Quiescent current (per amplifier) | IQ | | 650 | 750 | µA | VS = 1.8 V, TA = -40°C to +125°C | 12 |
| Quiescent current (per amplifier) | IQ | | 850 | 1000 | µA | VS = 3.6 V, TA = -40°C to +125°C | 12 |
| Quiescent current (per amplifier) | IQ | | 1.1 | 1.4 | mA | VS = 5.5 V, TA = -40°C to +125°C | 12 |
| Supply voltage ([V+], [V-]) | | 0 | | 5.5 | V | | 8 |
| Signal input pin current | | -10 | | 10 | mA | | 8 |
| Junction temperature | TJ | | | 150 | °C | | 8 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 8 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 8 |
| ESD CDM | V(ESD) | -750 | | 750 | V | Charged-device model, JESD22-C101 | 8 |
| Supply voltage ([V+], [V-]) | | 1.8 | | 5.5 | V | | 8 |
| Operating temperature | TA | -40 | | 125 | °C | | 8 |
| Junction-to-ambient thermal resistance | RθJA | | 211.4 | | °C/W | DBV (SOT-23) | 9 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 137 | | °C/W | DBV (SOT-23) | 9 |
| Junction-to-board thermal resistance | RθJB | | 39.8 | | °C/W | DBV (SOT-23) | 9 |
| Junction-to-top characterization parameter | ψJT | | 20.6 | | °C/W | DBV (SOT-23) | 9 |
| Junction-to-board characterization parameter | ψJB | | 38.9 | | °C/W | DBV (SOT-23) | 9 |
| Input voltage noise | en | | 10 | | µVPP | f = 0.1 Hz to 10 Hz | 11 |
| Gain-bandwidth product | GBW | | 7 | | MHz | CL = 100 pF | 11 |
| Slew rate | SR | | 5 | | V/µs | CL = 100 pF, G = 1 | 11 |
| Turnon time | tON | | 20 | | µs | | 11 |
| Turnoff time | tOFF | | 1 | | µs | | 11 |
## CAD (KiCad official)
- Symbol: `OPA363IDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `opa363idbvr-etched.step` / `opa363idbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa363idbvr.step` / `opa363idbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa363i.pdf) (59 pp, sha256 `9609f23ba0f31d1c`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa363idbvr-datasheet.pdf)