main
Ray
opa356aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
ea735ac
OPA356AIDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
OPA356AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Amplifier output. Rail-to-rail output stage swings within 100mV of the supply rails with RL=150 ohm (typ 0.2V from rail). Continuous output current up to +/-60mA, peak +/-100mA at 5V supply. |
| 2 | V- | power_in | Negative supply / ground pin. For single-supply operation tie to GND; for dual-supply tie to negative rail. Total supply (V+ to V-) 2.5V to 5.5V, absolute max 7.5V. |
| 3 | +In | input | Non-inverting input. High-impedance CMOS gate (~10^13 ohm |
| 4 | -In | input | Inverting input. High-impedance CMOS gate (~10^13 ohm |
| 5 | V+ | power_in | Positive supply pin. Single-supply range 2.5V to 5.5V (dual +/-1.25V to +/-2.75V). Quiescent current typ 8.3mA per amplifier at Vs=5V. Bypass with a low-ESR capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
OPA356AIDBVTOPA356AIDBVROPA356AIDROPA356AIDBVROPA2356AIDGKTOPA356AIDBVROPA2356AIDGKROPA356AIDBVROPA2356AIDOPA356AIDBVROPA2356AIDR
CAD (KiCad official)
- Symbol:
OPA356AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa356aidbvr-etched.step/opa356aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa356aidbvr.step/opa356aidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
3137cd4c1348cd81, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA356AIDBVR
**Texas Instruments** · Operational Amplifier · SOT-23-5
OPA356AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Amplifier output. Rail-to-rail output stage swings within 100mV of the supply rails with RL=150 ohm (typ 0.2V from rail). Continuous output current up to +/-60mA, peak +/-100mA at 5V supply. |
| 2 | V- | power_in | Negative supply / ground pin. For single-supply operation tie to GND; for dual-supply tie to negative rail. Total supply (V+ to V-) 2.5V to 5.5V, absolute max 7.5V. |
| 3 | +In | input | Non-inverting input. High-impedance CMOS gate (~10^13 ohm || 1.5pF). Input common-mode range extends from (V-)-0.1V up to (V+)-1.5V; input bias current typ 3pA. |
| 4 | -In | input | Inverting input. High-impedance CMOS gate (~10^13 ohm || 1.5pF). Diode-clamped to the rails; input signals swinging more than 0.5V beyond supplies should be current-limited to 10mA. |
| 5 | V+ | power_in | Positive supply pin. Single-supply range 2.5V to 5.5V (dual +/-1.25V to +/-2.75V). Quiescent current typ 8.3mA per amplifier at Vs=5V. Bypass with a low-ESR capacitor close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `OPA356AIDBVT`
- `OPA356AIDBVR`
- `OPA356AIDR`
- `OPA356AIDBVROPA2356AIDGKT`
- `OPA356AIDBVROPA2356AIDGKR`
- `OPA356AIDBVROPA2356AID`
- `OPA356AIDBVROPA2356AIDR`
## CAD (KiCad official)
- Symbol: `OPA356AIDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `opa356aidbvr-etched.step` / `opa356aidbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa356aidbvr.step` / `opa356aidbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa356ai.pdf) (18 pp, sha256 `3137cd4c1348cd81`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa356aidbvr-datasheet.pdf)