component
OPA353NA
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA353NA
Texas Instruments · Operational Amplifier · SOT-23-5
OPA353NA from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Rail-to-rail amplifier output swinging to within 10mV of the supply rails with a 10kΩ load, with ±40mA output current and ±80mA short-circuit current. |
| 2 | V- | power_in | Negative supply, ground in single-supply operation; the total supply (VS) is 2.7V to 5.5V, with 2.5V minimum operating voltage. |
| 3 | +In | input | Non-inverting input with common-mode range of -0.1V to (V+)+0.1V, diode-clamped to the supply rails so signals beyond 0.3V past the rails must be current-limited to 10mA. |
| 4 | -In | input | Inverting input with common-mode range of -0.1V to (V+)+0.1V, diode-clamped to the supply rails so signals beyond 0.3V past the rails must be current-limited to 10mA. |
| 5 | V+ | power_in | Positive supply, 2.7V to 5.5V operating range with 5.5V absolute maximum supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
OPA353NA - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa353na-etched.step/opa353na-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa353na.step/opa353na.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
feda07cfe615611c, retrieved 2026-10-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).