main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs opa350ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
opa350ua-etched.fit.json opa350ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa350ua-etched.glb opa350ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa350ua-etched.step opa350ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa350ua.glb Publish 0.1.0 · Ray
opa350ua.kicad_mod Publish 0.1.0 · Ray
opa350ua.kicad_sym Publish 0.1.0 · Ray
opa350ua.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
opa350ua.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray
README.md opa350ua: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

OPA350UA

Texas Instruments · Precision OpAmps · SOIC-8

OPA350UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Leave floating or tie to a static potential.
2 -In input Inverting input of the operational amplifier. Common-mode range extends 0.1V beyond each rail (-0.1V to V+ +0.1V). Input bias current typ. +/-0.5pA.
3 +In input Non-inverting input of the operational amplifier. Common-mode range extends 0.1V beyond each rail (-0.1V to V+ +0.1V).
4 V- power_in Negative supply rail (or GND in single-supply operation). Total supply voltage V+ to V- must be between 2.7V and 5.5V (7.0V absolute max).
5 NC unconnected No internal connection. Leave floating or tie to a static potential.
6 Output output Rail-to-rail amplifier output. Swings within 10mV of each supply rail with a 10k-ohm load. Output current +/-40mA typ, short-circuit +/-80mA.
7 V+ power_in Positive supply rail. Operating range 2.7V to 5.5V with respect to V-. Quiescent current typ. 5.2mA per amplifier.
8 NC unconnected No internal connection. Leave floating or tie to a static potential.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • OPA350UA
  • OPA350UA/2K5
  • OPA350EA/250
  • OPA350EA/2K5
  • OPA350PA
  • OPA350UAOPA2350UA
  • OPA350UAOPA2350UA/2K5
  • OPA350UAOPA2350EA/250
  • OPA350UAOPA2350EA/2K5
  • OPA350UAOPA2350PA
  • OPA350UAOPA4350UA
  • OPA350UAOPA4350UA/2K5
  • OPA350UAOPA4350EA/250
  • OPA350UAOPA4350EA/2K5

CAD (KiCad official)

  • Symbol: OPA350UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa350ua-etched.step / opa350ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa350ua.step / opa350ua.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
opa350ua.step 122 KB You want the bare part, or you mark your own boards.
opa350ua-etched.step 1.9 MB You want the part with OPA350UA already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 465 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 84420571ada2f45c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF